Nanoporous metal/oxide hybrid materials for rechargeable lithium–oxygen batteries

Lithium–oxygen batteries have attracted considerable attention due to their expected specific energy being far higher than that of lithium-ion batteries. The high charge overpotentials of the cathodic oxygen evolution reaction of insulator lithium peroxide is one of the critical challenges for practical implementation of lithium–oxygen batteries, which results in low energy efficiency and poor stability of cathodes and electrolytes. Transition metal oxides are known to be the most active electrocatalysts that can dramatically decrease the charging overpotentials of rechargeable lithium–air batteries. However, the poor electrical conductivity of these oxide electrocatalysts, such as RuO2, MnO2 and Co3O4, limits the charge transport of cathodic reactions and the full utilization of their catalytic activities. Herein, we exploit the high oxygen evolution reaction activities of oxides by incorporating insulator oxides into the pore channels of highly conductive nanoporous gold to form three-dimensional nanoporous core–shell composites. The hybrid catalysts as the cathodes of rechargeable lithium–oxygen batteries show highly reversible cathodic reactions at extremely lower overpotentials for high efficiency lithium–air batteries, arising from the synergistic effect of high conductive nanoporous gold (NPG) and catalytically active metal oxides.

[1]  Yang Shao-Horn,et al.  Chemical and Morphological Changes of Li–O2 Battery Electrodes upon Cycling , 2012 .

[2]  A. Hirata,et al.  Asymmetric metal oxide pseudocapacitors advanced by three-dimensional nanoporous metal electrodes , 2014 .

[3]  Lei Jin,et al.  Titanium Containing γ‐MnO2 (TM) Hollow Spheres: One‐Step Synthesis and Catalytic Activities in Li/Air Batteries and Oxidative Chemical Reactions , 2010 .

[4]  Jun Lu,et al.  Synthesis, Characterization, and Structural Modeling of High‐Capacity, Dual Functioning MnO2 Electrode/Electrocatalysts for Li‐O2 Cells , 2013 .

[5]  Xin-bo Zhang,et al.  Direct electrodeposition of cobalt oxide nanosheets on carbon paper as free-standing cathode for Li–O2 battery , 2014 .

[6]  Yuyan Shao,et al.  Electrocatalysts for Nonaqueous Lithium–Air Batteries: Status, Challenges, and Perspective , 2012 .

[7]  A. Karma,et al.  Evolution of nanoporosity in dealloying , 2001, Nature.

[8]  Biao Zhang,et al.  Mechanisms of capacity degradation in reduced graphene oxide/α-MnO2 nanorod composite cathodes of Li–air batteries , 2013 .

[9]  Sung Ho Song,et al.  Bifunctional composite catalysts using Co3O4 nanofibers immobilized on nonoxidized graphene nanoflakes for high-capacity and long-cycle Li-O2 batteries. , 2013, Nano letters.

[10]  Hun‐Gi Jung,et al.  Ruthenium-based electrocatalysts supported on reduced graphene oxide for lithium-air batteries. , 2013, ACS nano.

[11]  K. Klabunde,et al.  XPS studies of solvated metal atom dispersed (SMAD) catalysts. Evidence for layered cobalt-manganese particles on alumina and silica , 1991 .

[12]  Ping He,et al.  Core-shell-structured CNT@RuO(2) composite as a high-performance cathode catalyst for rechargeable Li-O(2) batteries. , 2014, Angewandte Chemie.

[13]  Peter G Bruce,et al.  Alpha-MnO2 nanowires: a catalyst for the O2 electrode in rechargeable lithium batteries. , 2008, Angewandte Chemie.

[14]  S. Trasatti.  Electrocatalysis in the anodic evolution of oxygen and chlorine , 1984 .

[15]  L. Nazar,et al.  Oxide Catalysts for Rechargeable High‐Capacity Li–O2 Batteries , 2012 .

[16]  John G. Dillard,et al.  Surface analysis and the adsorption of Co(II) on goethite , 1983 .

[17]  Z. Wen,et al.  A free-standing-type design for cathodes of rechargeable Li–O2 batteries , 2011 .

[18]  Yuhui Chen,et al.  Charging a Li-O₂ battery using a redox mediator. , 2013, Nature chemistry.

[19]  Junmo Kang,et al.  Toward the Theoretical Capacitance of RuO2 Reinforced by Highly Conductive Nanoporous Gold , 2013 .

[20]  B. Kumar,et al.  Electrochemical performance of highly mesoporous nitrogen doped carbon cathode in lithium-oxygen batteries , 2011 .

[21]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[22]  F. Meng,et al.  Sub‐Micrometer‐Thick All‐Solid‐State Supercapacitors with High Power and Energy Densities , 2011, Advanced materials.

[23]  W. Gissler,et al.  ESCA Spectra and Electronic Properties of Some Ruthenium Compounds , 1982, January 16.

[24]  Dan Xu,et al.  3D ordered macroporous LaFeO3 as efficient electrocatalyst for Li–O2 batteries with enhanced rate capability and cyclic performance , 2014 .

[25]  Bing Sun,et al.  Ruthenium nanocrystals as cathode catalysts for lithium-oxygen batteries with a superior performance , 2013, Scientific Reports.

[26]  B. McCloskey,et al.  Lithium−Air Battery: Promise and Challenges , 2010 .

[27]  W. Bennett,et al.  Hierarchically porous graphene as a lithium-air battery electrode. , 2011, Nano letters.

[28]  Tao Zhang,et al.  Challenges of non-aqueous Li–O2 batteries: electrolytes, catalysts, and anodes , 2013 .

[29]  Y. Park,et al.  Carbon-sphere/Co3O4 nanocomposite catalysts for effective air electrode in Li/air batteries , 2013 .

[30]  Sun Tai Kim,et al.  Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air , 2010 .

[31]  Akihiko Hirata,et al.  Nanoporous metal/oxide hybrid electrodes for electrochemical supercapacitors. , 2011, Nature nanotechnology.

[32]  Xin-bo Zhang,et al.  Synthesis of perovskite-based porous La(0.75)Sr(0.25)MnO3 nanotubes as a highly efficient electrocatalyst for rechargeable lithium-oxygen batteries. , 2013, Angewandte Chemie.

[33]  Keith Scott,et al.  Carbon-supported manganese oxide nanocatalysts for rechargeable lithium–air batteries , 2010 .

[34]  Xin-bo Zhang,et al.  High aspect ratio γ-MnOOH nanowires for high performance rechargeable nonaqueous lithium-oxygen batteries. , 2012, Chemical communications.

[35]  Shuo Chen,et al.  Platinum-gold nanoparticles: a highly active bifunctional electrocatalyst for rechargeable lithium-air batteries. , 2010, Journal of the American Chemical Society.

[36]  H. Byon,et al.  Promoting formation of noncrystalline Li2O2 in the Li-O2 battery with RuO2 nanoparticles. , 2013, Nano letters.

[37]  Betar M. Gallant,et al.  All-carbon-nanofiber electrodes for high-energy rechargeable Li–O2 batteries , 2011 .

[38]  A. Hirata,et al.  Enhanced supercapacitor performance of MnO2 by atomic doping. , 2013, Angewandte Chemie.

[39]  Xin-bo Zhang,et al.  Graphene Oxide Gel‐Derived, Free‐Standing, Hierarchically Porous Carbon for High‐Capacity and High‐Rate Rechargeable Li‐O2 Batteries , 2012 .

[40]  Dan Xu,et al.  Tailoring deposition and morphology of discharge products towards high-rate and long-life lithium-oxygen batteries , 2013, Nature Communications.

[41]  P. Bruce,et al.  A Reversible and Higher-Rate Li-O2 Battery , 2012, Science.

[42]  Jun Lu,et al.  A nanostructured cathode architecture for low charge overpotential in lithium-oxygen batteries , 2013, Nature Communications.

[43]  Yuyan Shao,et al.  Making Li‐Air Batteries Rechargeable: Material Challenges , 2013 .