Metallurgical reactions in composite 90Pb10Sn/lead-free solder joints and their effect on reliability of LTCC/PWB assembly

Use of 90Pb10Sn solder as a noncollapsible sphere material with 95.5Sn 4Ag0.5Cu and SnInAgCu lead-free solders is investigated. Practical reflow conditions led to strong Pb dissolution into liquid solder, resulting in >20 at.% Pb content in the original lead-free solders. The failure mechanism of the test joints is solder cracking due to thermal fatigue, but the characteristic lifetime of 90Pb10Sn/SnInAgCu joints is almost double that of 90Pb10Sn/95.5Sn4Ag0.5Cu in a thermal cycling test (TCT) over the temperature range from −40°C to 125°C. It is predicted that this is mainly a consequence of the better fatigue resistance of the SnPbInAgCu alloy compared with the SnPbAgCu alloy. Indium accelerates the growth of the intermetallic compound (IMC) layer at the low temperature co-fired ceramic (LTCC) metallization/solder interface and causes coarsening of IMC particles during the TCT, but these phenomena do not have a major effect on the creep/fatigue endurance of the test joints.

[1]  M. L. Huang,et al.  Effects of Cu, Bi, and In on microstructure and tensile properties of Sn-Ag-X(Cu, Bi, In) solders , 2005 .

[2]  Pradeep Lall,et al.  Thermal cycling reliability of lead‐free chip resistor solder joints , 2004 .

[3]  C. Kao,et al.  Inhibiting the formation of (Au1−xNix)Sn4 and reducing the consumption of Ni metallization in solder joints , 2002 .

[4]  S. Rajagopal,et al.  The impact of lead-free legislation exemptions on the electronics industry , 2004, IEEE Transactions on Electronics Packaging Manufacturing.

[5]  Jaakko Lenkkeri,et al.  Thermal fatigue in solder joints of Ag-Pd and Ag-Pt metallized LTCC modules , 2001, Microelectron. Reliab..

[6]  Wei Lin,et al.  TBGA reliability in telecom environment , 2000 .

[7]  Y. Nagai,et al.  Excellent reliability of solder ball made of a compliant plastic core , 2001, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220).

[8]  C. Kao,et al.  Liquid/solid and solid/solid reactions between SnAgCu lead-free solders and Ni surface finish , 2002, Proceedings of the 4th International Symposium on Electronic Materials and Packaging, 2002..

[9]  K. Kautio,et al.  Solder joint reliability in AgPt‐metallized LTCC modules , 2005 .

[10]  Peter Borgesen,et al.  The growth of intermetallic compounds at Sn-Ag-Cu solder/Cu and Sn-Ag-Cu solder/Ni interfaces and the associated evolution of the solder microstructure , 2001 .

[11]  Xianzhang Zeng.  Thermodynamic analysis of influence of Pb contamination on Pb-free solder joints reliability , 2003 .

[12]  Y. L. Lin,et al.  Effect of Cu concentration on the reactions between Sn-Ag-Cu solders and Ni , 2002 .

[13]  J. E. Semmens,et al.  Characterization of flip chip interconnect failure modes using high frequency acoustic micro imaging with correlative analysis , 1997, 1997 IEEE International Reliability Physics Symposium Proceedings. 35th Annual.

[14]  S. Y. Chang,et al.  Intermetallic compounds formed during the reflow and aging of Sn-3.8Ag-0.7Cu and Sn-20In-2Ag-0.5Cu solder ball grid array packages , 2004 .

[15]  Y. Chan,et al.  Effect of indium addition in Sn-rich solder on the dissolution of Cu metallization , 2005 .

[16]  Seung-Boo Jung,et al.  Interfacial reactions and shear strengths between Sn-Ag-based Pb-free solder balls and Au/EN/Cu metallization , 2004 .

[17]  T. Chuang,et al.  Mechanisms for the intermetallic formation during the Sn-20In-2.8Ag/Ni soldering reactions , 2004 .

[18]  Jussi Putaala,et al.  Reliability and RF performance of BGA solder joints with plastic-core solder balls in LTCC/PWB assemblies , 2006, Microelectron. Reliab..