Effects of Nd on the Microstructures, Mechanical Properties and in Vitro Corrosion Behavior of Cast Mg-1Mn-2Zn-xNd Alloys

Effects of neodymium (Nd) on the microstructures, mechanical properties, in vitro corrosion behavior, and cytotoxicity of as-cast Mg-1Mn-2Zn-xNd alloys (x = 0.5, 1.0, 1.5, mass%) have been investigated to assess whether Nd is an effective element to increase the strength and corrosion resistance of Mg alloys, and to evaluate whether those alloys are suitable for biomedical applications. The microstructures were examined by X-ray diffraction analysis and optical microscopy. The mechanical properties were determined from uniaxial tensile and compressive tests. The corrosion behavior was studied using electrochemical measurement and cytotoxicity was evaluated using osteoblast-like SaOS2 cell. The results indicate that all the cast Mg-1Mn-2Zn-xNd alloys are composed of both alpha phase of magnesium (Mg) and a compound of Mg7Zn3, and their grain sizes decrease with Nd content. Nd is not an effective element to improve the strength and corrosion resistance of cast Mg-Mn-Zn alloys. Increase of Nd content from 0.5 to 1.5 does not significantly change biocompatibility of alloys. The cast alloys exhibit much better corrosion resistance than pure Mg and good biocompatibility.

[1]  M. Medraj,et al.  Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys , 2014 .

[2]  P. Kumta,et al.  In vitro and in vivo corrosion, cytocompatibility and mechanical properties of biodegradable Mg-Y-Ca-Zr alloys as implant materials. , 2013, Acta biomaterialia.

[3]  Karl Ulrich Kainer,et al.  Microstructure, mechanical and corrosion properties of Mg-Dy-Gd-Zr alloys for medical applications. , 2013, Acta biomaterialia.

[4]  E. Aghion,et al.  Effect of diffusion coating of Nd on the corrosion resistance of biodegradable Mg implants in simulated physiological electrolyte. , 2013, Acta biomaterialia.

[5]  C. Wen,et al.  Microstructures, mechanical properties and in vitro corrosion behaviour of biodegradable Mg–Zr–Ca alloys , 2013, Journal of Materials Science.

[6]  E. Han,et al.  The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys , 2012 .

[7]  Zhang-zhong Wang,et al.  Improvement of mechanical properties and corrosion resistance of biodegradable Mg–Nd–Zn–Zr alloys by double extrusion , 2012 .

[8]  W. Ding,et al.  Effects of extrusion and heat treatment on the mechanical properties and biocorrosion behaviors of a Mg-Nd-Zn-Zr alloy. , 2012, Journal of the mechanical behavior of biomedical materials.

[9]  Peter Hodgson,et al.  The effects of calcium and yttrium additions on the microstructure, mechanical properties and biocompatibility of biodegradable magnesium alloys , 2011 .

[10]  Frank Witte,et al.  The history of biodegradable magnesium implants: a review. , 2010, Acta biomaterialia.

[11]  M. Escudero,et al.  Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids. , 2010, Acta biomaterialia.

[12]  P. Hodgson,et al.  Cytotoxicity of Titanium and Titanium Alloying Elements , 2010, Journal of dental research.

[13]  Yang Song,et al.  Research on an Mg-Zn alloy as a degradable biomaterial. , 2010, Acta biomaterialia.

[14]  Ke Yang,et al.  Microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Mn alloys for biomedical application , 2009 .

[15]  Yufeng Zheng,et al.  In vitro corrosion and biocompatibility of binary magnesium alloys. , 2009, Biomaterials.

[16]  Ji-Young Lee,et al.  Influence of Ca on the corrosion properties of magnesium for biomaterials , 2008 .

[17]  Jun Wang,et al.  Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg-4Al-based alloy , 2008 .

[18]  P. Uggowitzer,et al.  Corrosion behaviour of an Mg–Y–RE alloy used in biomedical applications studied by electrochemical techniques , 2008 .

[19]  Lidong Wang,et al.  Microstructure and mechanical properties of Mg-4.5Zn-xNd (x=0, 1 and 2, wt%) alloys , 2008 .

[20]  Yufeng Zheng,et al.  The development of binary Mg-Ca alloys for use as biodegradable materials within bone. , 2008, Biomaterials.

[21]  Ke Yang,et al.  In vitro corrosion behaviour of Mg alloys in a phosphate buffered solution for bone implant application , 2008, Journal of materials science. Materials in medicine.

[22]  Guang-Ling Song,et al.  Control of biodegradation of biocompatable magnesium alloys , 2007 .

[23]  Qudong Wang,et al.  Effect of Nd and Y addition on microstructure and mechanical properties of as-cast Mg–Zn–Zr alloy , 2007 .

[24]  Y. Miyashita,et al.  Influence of Mn content on mechanical properties and fatigue behavior of extruded Mg alloys , 2006 .

[25]  Frank Witte,et al.  In vitro and in vivo corrosion measurements of magnesium alloys. , 2006, Biomaterials.

[26]  Alexis M Pietak,et al.  Magnesium and its alloys as orthopedic biomaterials: a review. , 2006, Biomaterials.

[27]  C. Boehlert,et al.  The microstructure, tensile properties, and creep behavior of Mg-Zn alloys containing 0-4.4 wt.% Zn , 2006 .

[28]  H. Haferkamp,et al.  In vivo corrosion of four magnesium alloys and the associated bone response. , 2005, Biomaterials.

[29]  岡本 博明,et al.  Desk handbook phase diagrams for binary alloys , 2000 .

[30]  M. Avedesian,et al.  ASM Speciality Handbook Magnesium and Magnesium Alloys , 1999 .