Integrated plasma physics modelling for the Culham steady state spherical tokamak fusion power plant

Integrated modelling of important plasma physics issues related to the design of a steady-state spherical tokamak (ST) fusion power plant is described. The key is a steady-state current drive, and 92% of this is provided by a combination of bootstrap and diamagnetic currents, both of which have a substantial toroidal component in a ST. The remaining current is to be provided by either neutral beam injection or radio-frequency waves, and various schemes for providing this are discussed and quantified. The desire to achieve a high bootstrap current drives the design to high plasma pressure, β (normalized to the magnetic field pressure), and high elongation. Both these requirements have implications for ideal magneto-hydrodynamic instability which are discussed. Confinement is addressed both through comparison with the recent scaling laws developed from the conventional tokamak database and self-consistent one-dimensional modelling of the transport processes. This modelling shows that the power required for the current drive (∼50 MW) is sufficient to heat the plasma to a regime where more than 3 GW of fusion power is produced, taking into account the dilution due to He ash and prompt α-particle losses, which are small. A preliminary study of the micro-instabilities, which may be responsible for the turbulent transport is provided. Given assumptions about the particle confinement, we make estimates of the fuelling requirements to maintain the steady state. Finally, the power loading due to the exhaust is derived using theory-based scalings for the scrape-off layer width.