A review of cavability evaluation in longwall top coal caving

Abstract Longwall Top Coal Caving has been considered as one of the most effective technologies for the extraction of underground thick coal seams. A large number of studies on the applicability of Longwall Top Coal Caving into new mine sites have linked the success of its application to the geomechanical understanding of the cavability of the top coal. The paper aims to improve the knowledge of the top coal cavability evaluation. A range of parameters that affect the top coal cavability were first identified. Afterward, a number of cavability assessment methods and classifications were reviewed. The result is important in that it assists researchers in developing an advanced and reliable tool for the top coal cavability evaluation.

[1]  Bruce Hebblewhite,et al.  A new cavability assessment criterion for Longwall Top Coal Caving , 2010 .

[2]  Ferri P. Hassani,et al.  Prediction of the height of destressed zone above the mined panel roof in longwall coal mining , 2012 .

[3]  A. Wilson,et al.  The stability of underground workings in the soft rocks of the Coal Measures , 1983 .

[4]  P. K. Kaiser,et al.  Support of underground excavations in hard rock , 1995 .

[5]  R. Mitra,et al.  Evaluation of valley closure subsidence effects under irregular topographic conditions , 2013 .

[6]  Rao Balusu,et al.  Prefeasibility study—Geotechnical studies for introducing longwall top coal caving in Indian mines , 2014, Journal of Mining Science.

[7]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[8]  Yangsheng Zhao,et al.  Numerical simulation of the top coal caving process using the discrete element method , 2009 .

[9]  U. K. Singh,et al.  A numerical modeling approach for assessment of progressive caving of strata and performance of hydraulic powered support in longwall workings , 2009 .

[10]  P. Gaskell,et al.  Subsurface ground strain and fracture development associated with longwall mining , 1990 .

[11]  Davide Elmo,et al.  Numerical modelling of the effects of weak immediate roof lithology on coal mine roadway stability , 2012 .

[12]  C. Mark,et al.  Coal Mine Roof Rating (CMRR): A practical rock mass classification for coal mines. Information circular/1994 , 1994 .

[13]  G. S. Esterhuizen,et al.  Investigations into the effect of discontinuities on the strength of coal pillars , 1997 .

[14]  Lanru Jing,et al.  Discontinuous Modelling of Stratum Cave-in in a Longwall Coal Mine in the Arctic Area , 2014, Geotechnical and Geological Engineering.

[15]  Allen W. Hatheway,et al.  The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring; 1974–2006 , 2009 .

[16]  Jiachen Wang,et al.  Caving mechanisms of loose top-coal in longwall top-coal caving mining method , 2014 .

[17]  C. Mark,et al.  The Coal Mine Roof Rating (CMRR)—a decade of experience , 2005 .

[18]  Heping Xie,et al.  Three-dimensional numerical analysis of deformation and failure during top coal caving , 1999 .

[19]  E. Hoek,et al.  Trends in relationships between measured in-situ stresses and depth , 1978 .

[20]  Bahtiyar Ünver,et al.  3D numerical modeling of longwall mining with top-coal caving , 2005 .

[21]  C. Derek Martin,et al.  Effect of heterogeneity of brittle rock on micromechanical extensile behavior during compression loading , 2010 .

[22]  Lanru Jing,et al.  A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering , 2003 .

[23]  Nick Barton,et al.  Engineering classification of rock masses for the design of tunnel support , 1974 .

[24]  Ningbo Zhang,et al.  Arch structure effect of the coal gangue flow of the fully mechanized caving in special thick coal seam and its impact on the loss of top coal , 2016 .

[25]  Rao Balusu,et al.  Evaluation of mine scale longwall top coal caving parameters using continuum analysis , 2011 .

[26]  Syd S. Peng,et al.  Coal Mine Ground Control , 1978 .

[27]  Gernot Beer,et al.  Numerical methods in rock mechanics , 1990 .

[28]  Jiachen Wang,et al.  Failure mechanism and control technology of longwall coalface in large-cutting-height mining method , 2016 .

[29]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[30]  Jian Zhao,et al.  Micromechanical parameters in bonded particle method for modelling of brittle material failure , 2010 .

[31]  Pengfei Jiang,et al.  Key technologies and equipment for a fully mechanized top-coal caving operation with a large mining height at ultra-thick coal seams , 2015 .

[32]  C. O. Babcock,et al.  Stress distribution and rock fracture zones in the roof of longwall face in a coal mine , 1973 .

[33]  Doug Stead,et al.  Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approach , 2014 .

[34]  P. R. Sheorey.  A theory for In Situ stresses in isotropic and transverseley isotropic rock , 1994 .

[35]  D. J. Reddish,et al.  The relation between in situ and laboratory rock properties used in numerical modelling , 1997 .

[37]  Jerry C. Tien.  Longwall Caving in Thick Seams , 1998 .

[38]  Ju-cai Chang,et al.  Investigations into stress shell characteristics of surrounding rock in fully mechanized top-coal caving face , 2009 .

[39]  J. Olson,et al.  Characteristics and origins of coal cleat: A review , 1998 .

[40]  Charlie C. Li,et al.  Numerical modelling of longwall mining and stability analysis of the gates in a coal mine , 2012 .

[41]  A. K. Isaac,et al.  Failure zone development above longwall panels , 1990 .

[42]  G. S. P. Singh,et al.  Conventional approaches for assessment of caving behaviour and support requirement with regard to strata control experiences in longwall workings , 2015 .

[43]  Fudong Ge,et al.  Analysis of stability of support and surrounding rock in mining top coal of inclined coal seam , 2014 .

[44]  Jinhua Wang,et al.  Development and prospect on fully mechanized mining in Chinese coal mines , 2014 .

[45]  Rao Balusu,et al.  Combining modern assessment methods to improve understanding of longwall geomechanics , 1998 .

[46]  Xun Luo,et al.  Integrating tools for longwall geomechanics assessment , 2002 .

[47]  Shihao Tu,et al.  Theoretical analysis on the deformation characteristics of coal wall in a longwall top coal caving face , 2015 .

[48]  Brett Poulsen,et al.  Stress analysis of longwall top coal caving , 2010 .