Development of a structural optimization capability for the aeroelastic tailoring of composite rotor blades with straight and swept tips

This paper describes the development of a new structural optimization capability aimed at the aeroelastic tailoring of composite rotor blades with straight and swept tips. The primary objective is to reduce vibration levels in forward flight without diminishing the aeroelastic stability margins of the blade. In the course of this research activity a number of complicated tasks have been addressed: (1) development of a new, aeroelastic stability and response analysis; (2) formulation of a new comprehensive sensitive analysis, which facilitates the generation of the appropriate approximations for the objective and the constraints; (3) physical understanding of the new model and, in particular, determination of its potential for aeroelastic tailoring, and (4) combination of the newly developed analysis capability, the sensitivity derivatives and the optimizer into a comprehensive optimization capability. The first three tasks have been completed and the fourth task is in progress.

[1]  Peretz P. Friedmann,et al.  A new aeroelastic model for composite rotor blades with straight and swept tips , 1992 .

[2]  Peretz P. Friedmann,et al.  Nonlinear equations of equilibrium for elastic helicopter or wind turbine blades undergoing moderate deformation , 1978 .

[3]  P. Friedmann,et al.  The Nonlinear Behavior of Elastic Slender Straight Beams Undergoing Small Strains and Moderate Rotations , 1979 .

[4]  Peretz P. Friedmann,et al.  Helicopter vibration reduction using structural optimization with aeroelastic/multidisciplinary constraints - A survey , 1991 .

[5]  Olivier A. Bauchau,et al.  Large displacement analysis of naturally curved and twisted composite beams , 1987 .

[6]  Dewey H. Hodges,et al.  Review of composite rotor blade modeling , 1990 .

[7]  Inderjit Chopra,et al.  Design sensitivity analysis for an aeroelastic optimization of a helicopter blade , 1987 .

[8]  P. Friedmann,et al.  Structural dynamic modeling of advanced composite propellers by the finite element method , 1987 .

[9]  Dewey H. Hodges,et al.  A geometrically nonlinear analysis for nonhomogeneous, anisotropic beams , 1989 .

[10]  Peretz P. Friedmann,et al.  Vibration analysis of composite turbopropellers using a nonlinear beam-type finite-element approach , 1989 .

[11]  Inderjit Chopra,et al.  Aeroelastic optimization of a helicopter rotor , 1989 .

[12]  Inderjit Chopra,et al.  Aeroelastic Stability Analysis of a Composite Bearingless Rotor Blade , 1986 .

[13]  P. Friedmann,et al.  Aeroelastic behavior of composite rotor blades with swept tips , 1992 .

[14]  Jaroslaw Sobieszczanskisobieski,et al.  On the sensitivity of complex, internally coupled systems , 1988 .

[15]  Dewey H. Hodges,et al.  Nonlinear equations for dynamics of pretwisted beams undergoing small strains and large rotations , 1985 .

[16]  Earl H. Dowell,et al.  Nonlinear equations of motion for the elastic bending and torsion of twisted nonuniform rotor blades , 1974 .

[17]  Inderjit Chopra,et al.  Stability sensitivity analysis for the aeroelastic optimization of a helicopter rotor , 1988 .

[18]  D. H. Roberta. Hodges,et al.  Stability of elastic bending and torsion of uniform cantilever rotor blades in hover with variable structural coupling , 1976 .

[19]  Peretz P. Friedmann,et al.  Structural optimization with aeroelastic constraints of rotor blades with straight and swept tips , 1990 .

[20]  Olivier A. Bauchau,et al.  Nonlinear Composite Beam Theory , 1988 .

[21]  Peretz P. Friedmann,et al.  Rotor blade aeroelasticity in forward flight with an implicit aerodynamic formulation , 1988 .

[22]  W. R. Mantay,et al.  Integrated multidisciplinary optimization of rotorcraft: A plan for development , 1989 .

[23]  F. J. Tarzanin,et al.  Investigation of the Effect of Blade Sweep on Rotor Vibratory Loads. , 1983 .

[24]  Peretz P. Friedmann,et al.  Impact of structural optimization with aeroelastic/multidisciplinary constraints on helicopter rotor design , 1992 .

[25]  Peretz P. Friedmann,et al.  Coupled flap-lag-torsional dynamics of hingeless rotor blades in forward flight , 1982 .

[26]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[27]  Inderjit Chopra,et al.  Aeroelastic Stability Analysis of a Composite Rotor Blade , 1985 .

[28]  Peretz P. Friedmann,et al.  Helicopter rotor dynamics and aeroelasticity - Some key ideas and insights , 1990 .

[29]  Garret N. Vanderplaats,et al.  CONMIN: A FORTRAN program for constrained function minimization: User's manual , 1973 .

[30]  John Dugundji,et al.  Experiments and analysis for composite blades under large deflections. II - Dynamic behavior , 1990 .

[31]  Roberto Celi,et al.  AEROELASTIC MODELING OF SWEPT TIP ROTOR BLADES USING FINITE ELEMENTS. , 1988 .