Synthesis of pristine and carbon-coated Li4Ti5O12 and their low-temperature electrochemical performance

Abstract Pristine and carbon-coated Li 4 Ti 5 O 12 oxide electrodes are synthesized by a cellulose-assisted combustion technique with sucrose as organic carbon source and their low-temperature electrochemical performance as anodes for lithium-ion batteries are investigated. X-ray diffraction (XRD), infrared spectroscopy (IR), Raman spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) are applied to characterize the phase structure, composition, and morphology of the composites. It is found that the sequence of sucrose addition has significant effect on the phase formation of Li 4 Ti 5 O 12 . Carbon-coated Li 4 Ti 5 O 12 is successfully prepared by coating the pre-crystallized Li 4 Ti 5 O 12 phase with sucrose followed by thermal treatment. Electrochemical lithium insertion/extraction performance is evaluated by the galvanostatic charge/discharge tests, electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV), from room temperature (25 °C) to −20 °C. The carbon-coated composite anode materials show improved lithium insertion/extraction capacity and electrode kinetics, especially at high rates and low temperature. Both of the two samples show fairly stable cycling performance at various temperatures, which is highly promising for practical applications in power sources of electric or electric-hybrid vehicles.

[1]  Tsutomu Ohzuku,et al.  Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells , 1995 .

[2]  Zongping Shao,et al.  Combustion synthesis of high-performance Li4Ti5O12 for secondary Li-ion battery , 2009 .

[3]  Jaephil Cho,et al.  Spinel Li4Ti5O12 Nanowires for High-Rate Li-Ion Intercalation Electrode , 2007 .

[4]  Karim Zaghib,et al.  Electrochemical study of Li4Ti5O12 as negative electrode for Li-ion polymer rechargeable batteries , 1999 .

[5]  J. C. Ashley,et al.  Low energy electron attenuation length studies in thin amorphous carbon films , 1985 .

[6]  Xiaozhen Liao,et al.  Low-temperature performance of LiFePO4/C cathode in a quaternary carbonate-based electrolyte , 2008 .

[7]  Jing-ying Xie,et al.  Synthesis and electrochemical properties of Li4Ti5O12/C composite by the PVB rheological phase method , 2008 .

[8]  Jie Gao,et al.  Preparation and characteristic of carbon-coated Li4Ti5O12 anode material , 2007 .

[9]  X. Pan,et al.  High-rate characteristics of novel anode Li4Ti5O12/polyacene materials for Li-ion secondary batteries , 2008 .

[10]  Z. Wen,et al.  Improving the electrochemical performance of Li4Ti5O12/Ag composite by an electroless deposition method , 2007 .

[11]  Z. Wen,et al.  Composite anode materials for Li-ion batteries , 2007 .

[12]  Ladislav Kavan,et al.  Facile synthesis of nanocrystalline Li4Ti5O12 (spinel) exhibiting fast Li insertion , 2002 .

[13]  M. Senna,et al.  Preparation of phase pure and well-crystallized Li4Ti5O12 nanoparticles by precision control of starting mixture and calcining at lowest possible temperatures , 2007 .

[14]  T. Jow,et al.  Low temperature performance of nanophase Li4Ti5O12 , 2006 .

[15]  Changyin Jiang,et al.  High-density spherical Li4Ti5O12/C anode material with good rate capability for lithium ion batteries , 2007 .

[16]  Jong Pil Park,et al.  Preparation of Li4Ti5O12 nanoparticles by a simple sonochemical method , 2007 .

[17]  Q. Lai,et al.  Effects of dopant on the electrochemical properties of Li4Ti5O12 anode materials , 2007 .

[18]  Karim Zaghib,et al.  Electrochemistry of Anodes in Solid‐State Li‐Ion Polymer Batteries , 1998 .

[19]  Xuelin Yang,et al.  Research on Li4Ti5O12 ∕ Cu x O Composite Anode Materials for Lithium-Ion Batteries , 2005 .

[20]  Michael M. Thackeray,et al.  Spinel Anodes for Lithium‐Ion Batteries , 1994 .

[21]  Zilong Tang,et al.  Controllable formation and electrochemical properties of one-dimensional nanostructured spinel Li4Ti5O12 , 2005 .

[22]  M. Yamachi,et al.  Mechanism of Li-doping into Li4Ti5O12 negative active material for Li-ion cells by new chemical method , 2006 .

[23]  Yongyao Xia,et al.  Carbon-Coated Li4Ti5O12 as a High Rate Electrode Material for Li-Ion Intercalation , 2007 .

[24]  Zongping Shao,et al.  Cellulose-assisted combustion synthesis of Li4Ti5O12 adopting anatase TiO2 solid as raw material with high electrochemical performance , 2009 .

[25]  Ju-Wan Kim,et al.  Polyol-mediated synthesis of Li4Ti5O12 nanoparticle and its electrochemical properties , 2005 .

[26]  Robert Dominko,et al.  Carbon nanocoatings on active materials for Li-ion batteries , 2007 .

[27]  L. Kavan,et al.  Phase-pure nanocrystalline Li4Ti5O12 for a lithium-ion battery , 2003 .

[28]  Robert Dominko,et al.  Is small particle size more important than carbon coating? An example study on LiFePO4 cathodes , 2007 .

[29]  Zongping Shao,et al.  Process investigation, electrochemical characterization and optimization of LiFePO4/C composite from mechanical activation using sucrose as carbon source , 2009 .

[30]  K. Abraham,et al.  Preparation of micron-sized Li{sub 4}Ti{sub 5}O{sub 12} and its electrochemistry in polyacrylonitrile electrolyte-based lithium cells , 1998 .

[31]  A. Manthiram,et al.  Nanostructured electrodes for next generation rechargeable electrochemical devices , 2004 .

[32]  Ernö Pretsch,et al.  Structure Determination of Organic Compounds: Tables of Spectral Data , 2020 .

[33]  Qingsong Wang,et al.  Comparisons of graphite and spinel Li1.33Ti1.67O4 as anode materials for rechargeable lithium-ion batteries , 2005 .

[34]  T. Matsushima,et al.  Preparation of particulate Li4Ti5O12 having excellent characteristics as an electrode active material for power storage cells , 2003 .