Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)

[1]  J. Sarasua,et al.  Rheological Behavior and Modeling of Thermal Degradation of Poly(∊-Caprolactone) and Poly(L-Lactide) , 2007 .

[2]  Nicholas Gurieff,et al.  Comparative life cycle assessment and financial analysis of mixed culture polyhydroxyalkanoate production. , 2007, Bioresource technology.

[3]  J. Koberstein,et al.  Effect of Chain Architecture on Surface Segregation in Functional Polymers: Synthesis and Surface Properties of End- and Center-Functional Poly(D,L-lactide) , 2007 .

[4]  L. Ponz,et al.  Influence of the recycled material percentage on the rheological behaviour of HDPE for injection moulding process. , 2007, Waste management.

[5]  Xiaobo Liu,et al.  Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature , 2006 .

[6]  M. L. Lorenzo.  Calorimetric analysis of the multiple melting behavior of poly(L‐lactic acid) , 2006 .

[7]  M. L. Lorenzo.  The Crystallization and Melting Processes of Poly(L‐lactic acid) , 2006 .

[8]  E. Piorkowska,et al.  Crystallization, structure and properties of plasticized poly(l-lactide) , 2005 .

[9]  Tianxi Liu,et al.  Polishing effect on nanoindentation behavior of nylon 66 and its nanocomposites , 2005 .

[10]  I. Miskioglu,et al.  Nanoindentation of injection molded PLA and self-reinforced composite PLA after in vitro conditioning for three months. , 2005, Journal of biomedical materials research. Part A.

[11]  J. Mano,et al.  On the kinetics of melting and crystallization of poly(L-lactic acid) by TMDSC , 2005 .

[12]  M. L. Lorenzo.  Crystallization behavior of poly(l-lactic acid) , 2005 .

[13]  Catia Bastioli,et al.  Handbook of Biodegradable Polymers , 2005 .

[14]  Y. Shirai,et al.  Thermal degradation behaviour of poly(lactic acid) stereocomplex , 2004 .

[15]  J. Cano,et al.  Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing , 2004 .

[16]  M. Paoli,et al.  Nonisothermal crystallization of reprocessed poly(ethylene terephthalate) , 2004 .

[17]  I. Gutiérrez,et al.  Correlation between nanoindentation and tensile properties influence of the indentation size effect , 2003 .

[18]  J. Feller,et al.  Rheological and calorimetric properties of recycled bisphenol A poly(carbonate) , 2003 .

[19]  M. Shibata,et al.  Biocomposites Made from Short Abaca Fiber and Biodegradable Polyesters , 2003 .

[20]  Paul Kiekens,et al.  Biopolymers: overview of several properties and consequences on their applications. , 2002 .

[21]  T. Masuko,et al.  Crystallization behaviour of poly(l-lactide) , 1998 .

[22]  Johan-Fredrik Selin,et al.  Polylactides ‐ degradable polymers for fibres and films , 1997 .

[23]  K. Reichert,et al.  Thermal degradation of poly-L-lactide-studies on kinetics, modelling and melt stabilisation , 1997 .

[24]  Katrin Mackenzie,et al.  Thermal decomposition of biodegradable polyesters—II. Poly(lactic acid) , 1996 .

[25]  Mary Ann Curran,et al.  Environmental life-cycle assessment , 1996 .

[26]  Catia Bastioli,et al.  Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties , 1996 .

[27]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[28]  F. Pilati,et al.  Thermal degradation of poly(butylene terephthalate) , 1976 .