3D Printed UV–Visible Cuvette Adapter for Low-Cost and Versatile Spectroscopic Experiments

Ultraviolet–visible (UV–vis) spectroscopy represents one of the most popular analytical techniques in chemical research labs. A variety of vendors provide instruments that are suited for the analysis of liquid samples at moderate concentrations. However, to accommodate more specialized experiments, expensive accessories are required and often do not fit the specific needs of experimental scientists. In this work, we present a generalized adapter that can be 3D printed and used with existing spectrometers to enable a wide array of experiments to be performed. In the case of liquid samples, we provide a method for dramatically reducing the price of a quartz cuvette with minimal impact on performance. Through simple modification of the design, cuvettes with various path lengths can be prepared. Additionally, we illustrate the ability to turn any sample container into a working cuvette to simplify experimental protocols, prevent contamination risks, and further reduce costs. This strategy also enables gaseous and solid samples to be evaluated easily and reproducibly. Furthermore, we demonstrate how this concept can be extended to interface additional instrumentation with a commercial UV–vis spectrometer. All of the digital designs are provided under a creative commons license to enable other researchers to modify and adapt the designs for their unique experimental requirements.

[1]  Lucia L. Prieto-Godino,et al.  Open Labware: 3-D Printing Your Own Lab Equipment , 2015, PLoS biology.

[2]  J. Campbell,et al.  Kinetics—Early and often , 1963 .

[3]  Aliaa I. Shallan,et al.  Cost-effective three-dimensional printing of visibly transparent microchips within minutes. , 2014, Analytical chemistry.

[4]  J. Namyslo,et al.  3D‐Printing inside the Glovebox: A Versatile Tool for Inert‐Gas Chemistry Combined with Spectroscopy , 2016, Helvetica chimica acta.

[5]  Philip J. Kitson,et al.  Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices. , 2012, Lab on a chip.

[6]  T. C. Hall,et al.  Separation of the Absorption Spectra of NO2 and N2O4 in the Range of 2400–5000A , 1952 .

[7]  S. Lockwood,et al.  A 3D printed fluidic device that enables integrated features. , 2013, Analytical chemistry.

[8]  Aaron R Wheeler,et al.  Upon the Shoulders of Giants: Open-Source Hardware and Software in Analytical Chemistry. , 2017, Analytical chemistry.

[9]  M. Barlow,et al.  A 3D-printed high power nuclear spin polarizer. , 2014, Journal of the American Chemical Society.

[10]  W. Kaim,et al.  Spectroelectrochemistry: the best of two worlds. , 2009, Chemical Society reviews.

[11]  Derek Tseng,et al.  Fluorescent imaging of single nanoparticles and viruses on a smart phone. , 2013, ACS nano.

[12]  Joshua M. Pearce,et al.  Open-Source 3D-Printable Optics Equipment , 2013, PloS one.

[13]  M. H. Torcasio,et al.  Teaching UV–Vis Spectroscopy with a 3D-Printable Smartphone Spectrophotometer , 2016 .

[14]  G. Sergeev,et al.  Arene complexation of Sm, Eu, Tm and Yb atoms: a variable temperature spectroscopic investigation , 2003 .

[15]  R. Jones,et al.  Temperature dependent ultraviolet‐visible absorption cross sections of N2O and N2O4: Low‐temperature measurements of the equilibrium constant for 2NO2 ⇌ N2O4 , 1994 .

[16]  H. Kodama.  Automatic method for fabricating a three‐dimensional plastic model with photo‐hardening polymer , 1981 .

[17]  A. Cook,et al.  The Blue Bottle Reaction as a General Chemistry Experiment on Reaction Mechanisms , 1999 .

[18]  Johannes Orphal,et al.  The temperature and pressure dependence of the absorption cross-sections of NO2 in the 250–800 nm region measured by Fourier-transform spectroscopy , 2002 .