Validation of Simulated Chestband Data in Frontal and Lateral Loading Using a Human Body Finite Element Model

Objective: Finite element (FE) computer models are an emerging tool to examine the thoracic response of the human body in the simulated environment. In this study, a recently developed human body model, the Global Human Body Models Consortium (GHBMC) mid-sized male, was used to examine chestband contour deformations in a frontal and lateral impact. The objective of this study was 2-fold. First, a methodology for extracting and analyzing virtual chestband data from a full-body FE model is presented. Then, this method is applied to virtual chestband data from 2 simulations to evaluate the model's performance against experimental data. Methods: One frontal and one lateral impact case were simulated using the FE model, which was preprogrammed with upper, middle, and lower chestbands. Maximum compression was determined using established techniques. Furthermore, a quadrant-based analysis technique for the results was introduced that enabled regional comparisons between the model and the experimental data in the anterior, posterior, right, and left sections of the chestband. Results: For the frontal case at 13.3 m/s, the model predicted a peak compression of 13.6 and 12.9 percent for the upper and middle chestbands. For the lateral case at 6.7 m/s, the model predicted peak compression of the upper, middle, and lower chestbands of 27.9, 26.0, and 20.4 percent. Regional analysis showed average differences at maximum deformation between the model and experiments ranging from 0.9 percent (posterior) to 6.3 percent (anterior) in the frontal case and 2.3 percent (posterior) to 10.8 percent (anterior) in the lateral case. The greatest difference between model and experimental findings was found in the anterior quadrant. Conclusions: Though this work was focused on techniques to extract and analyze chestband data from FE models, the comparative results provide further validation of the model used in this study. The results suggest the importance of evaluating comparisons between virtual and experimental chestband data on a regional basis. These data also provide the potential to correlate chestband deformations to the loading of underlying thoraco-abdominal structures. Supplemental materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention to view the supplemental file.

[1]  Joel D Stitzel,et al.  Biomechanical modeling of eye trauma for different orbit anthropometries. , 2011, Journal of biomechanics.

[2]  J. Crandall,et al.  Rib fractures under anterior-posterior dynamic loads: experimental and finite-element study. , 2010, Journal of biomechanics.

[3]  S. Robin,et al.  HUMOS: HUMAN MODEL FOR SAFETY - A JOINT EFFORT TOWARDS THE DEVELOPMENT OF REFINED HUMAN-LIKE CAR OCCUPANT MODELS , 2001 .

[4]  Naveen Chandrashekar,et al.  Strain rate dependent properties of younger human cervical spine ligaments. , 2012, Journal of the mechanical behavior of biomedical materials.

[5]  Joel D. Stitzel,et al.  Lateral Impact Validation of a Geometrically Accurate Full Body Finite Element Model for Blunt Injury Prediction , 2012, Annals of Biomedical Engineering.

[6]  F. S. Gayzik,et al.  Development of a Full Body CAD Dataset for Computational Modeling: A Multi-modality Approach , 2011, Annals of Biomedical Engineering.

[7]  Costin D. Untaroiu,et al.  A Finite Element Model of the Lower Limb for Simulating Automotive Impacts , 2012, Annals of Biomedical Engineering.

[8]  Rolf H Eppinger,et al.  Response corridors of human surrogates in lateral impacts. , 2002, Stapp car crash journal.

[9]  F. S. Gayzik,et al.  External Landmark, Body Surface, and Volume Data of a Mid-Sized Male in Seated and Standing Postures , 2012, Annals of Biomedical Engineering.

[10]  Joel D Stitzel,et al.  Quantification of age-related shape change of the human rib cage through geometric morphometrics. , 2008, Journal of biomechanics.

[11]  Masami Iwamoto,et al.  DEVELOPMENT OF A FINITE ELEMENT MODEL OF THE TOTAL HUMAN MODEL FOR SAFETY (THUMS) AND APPLICATION TO INJURY RECONSTRUCTION , 2002 .

[12]  Kin Yuen,et al.  The Development of a Numerical Human Body Model for the Analysis of Automotive Side Impact Lung Trauma , 2010 .

[13]  Philippe Beillas,et al.  PERFORMANCE OF A 50th PERCENTILE ABDOMINAL MODEL FOR IMPACT: EFFECTS OF SIZE AND MASS , 2012 .

[14]  Jason Forman,et al.  Whole-body kinematic and dynamic response of restrained PMHS in frontal sled tests. , 2006, Stapp car crash journal.

[15]  Gopal Narwani,et al.  Development of a Human Body Finite Element Model for Restraint System R&D Applications , 2005 .

[16]  Narayan Yoganandan,et al.  Technique for chestband contour shape-mapping in lateral impact. , 2011, Journal of biomechanics.

[17]  Zuoping Li,et al.  Influence of mesh density, cortical thickness and material properties on human rib fracture prediction. , 2010, Medical engineering & physics.

[18]  Stephen W Rouhana,et al.  Analysis and evaluation of the biofidelity of the human body finite element model in lateral impact simulations according to ISO-TR9790 procedures. , 2006, Stapp car crash journal.

[19]  Joel D Stitzel,et al.  Computational model of the pregnant occupant: predicting the risk of injury in automobile crashes. , 2003, American journal of obstetrics and gynecology.

[20]  Matthew R. Maltese,et al.  CHESTBAND ANALYSIS OF HUMAN TOLERANCE TO SIDE IMPACT , 1997 .

[21]  K Brolin,et al.  Evaluation of a combination of continuum and truss finite elements in a model of passive and active muscle tissue , 2008, Computer methods in biomechanics and biomedical engineering.

[22]  King H. Yang,et al.  Development of numerical models for injury biomechanics research: a review of 50 years of publications in the Stapp Car Crash Conference. , 2006, Stapp car crash journal.

[23]  Masami Iwamoto,et al.  Development of a Three-Dimensional Finite Element Chest Model for the 5(th) Percentile Female. , 2005, Stapp car crash journal.

[24]  M. Panzer,et al.  Cervical Spine Model to Predict Capsular Ligament Response in Rear Impact , 2011, Annals of Biomedical Engineering.

[25]  Saeed Barbat,et al.  Biomechanical Analysis of Human Abdominal Impact Responses and Injuries through Finite Element Simulations of a Full Human Body Model. , 2005, Stapp car crash journal.

[26]  R. Brand,et al.  Three-dimensional flexibility and stiffness properties of the human thoracic spine. , 1976, Journal of biomechanics.

[27]  Li Chai,et al.  Prediction and analysis of human thoracic impact responses and injuries in cadaver impacts using a full human body finite element model. , 2003, Stapp car crash journal.

[28]  King H. Yang,et al.  Development of a Three-Dimensional Finite Element Chest Model for the 5(th) Percentile Female. , 2005, Stapp car crash journal.

[29]  Duane S Cronin,et al.  Cervical spine segment finite element model for traumatic injury prediction. , 2012, Journal of the mechanical behavior of biomedical materials.

[30]  Rolf H. Eppinger,et al.  Development of an Improved Thoracic Injury Criterion , 1998 .

[31]  Yih-Charng Deng,et al.  DEVELOPMENT OF A FINITE ELEMENT HUMAN THORAX MODEL FOR IMPACT INJURY STUDIES , 1999 .

[32]  K H Yang,et al.  Development of a computer model to predict aortic rupture due to impact loading. , 2001, Stapp car crash journal.

[33]  Costin D. Untaroiu,et al.  A Finite Element Model of the Foot and Ankle for Automotive Impact Applications , 2012, Annals of Biomedical Engineering.

[34]  S. Duma,et al.  Investigation of traumatic brain injuries using the next generation of simulated injury monitor (SIMon) finite element head model. , 2008, Stapp car crash journal.

[35]  John M. Cavanaugh,et al.  Finite Element Modeling of Gross Motion of Human Cadavers in Side Impact , 1994 .

[36]  David Mitton,et al.  HUMOS (Human Model for Safety) Geometry: From One Specimen to the 5 th and 95 th Percentile , 2006 .