Refining Ti2AlC particles and improvement of microstructure and mechanical properties on Ti46Al8Nb2.6C alloy by Er addition

[1]  Ruirun Chen,et al.  Adjusting the γ/α2 and Ti2AlC phase on microstructure evolution and improving mechanical properties at room and elevated temperatures with the addition of Ta , 2022, Intermetallics.

[2]  Ruirun Chen,et al.  Exploration of homologous substitution element on phase ratio and high temperature properties in high Nb-containing TiAl alloy , 2022, Journal of Alloys and Compounds.

[3]  Jun Xiong,et al.  Effect of heat input on auxiliary wire GMA-AM TiAl alloys , 2022, Materials and Manufacturing Processes.

[4]  M. Cho,et al.  Multiscale study to investigate nanoparticle agglomeration effect on electrical conductivity of nano-SiC reinforced polypropylene matrix composites , 2022, Mechanics of Advanced Materials and Structures.

[5]  Jianjun Wang,et al.  Precipitation of Ti2Al phases at lamellar interfaces in a high-Nb-containing TiAl alloy during thermal exposure , 2022, Journal of Materials Science & Technology.

[6]  Xionggang Lu,et al.  History and development of γ-TiAl alloys and the effect of alloying elements on their phase transformations , 2022, Journal of Alloys and Compounds.

[7]  C. Cui,et al.  Ti–46Al–4Nb alloy refined and reinforced by in-situ TiC nanoparticles and TiB2 whiskers , 2022, Journal of Alloys and Compounds.

[8]  J. Lapin,et al.  Effect of Ta and W Additions on Microstructure and Mechanical Properties of Tilt-Cast Ti-45Al-5Nb-2C Alloy , 2021, Metals.

[9]  Xiangjun Xu,et al.  Effects of Al and Mo on Microstructure and Hardness of As-Cast TNM TiAl Alloys , 2021, Metals.

[10]  Jieren Yang,et al.  Investigation on microstructure and mechanical properties of heat-treated Ti-47.5Al–3Nb-3.5Cr alloy , 2021, Materials Science and Engineering: A.

[11]  Ming Yan,et al.  The significant impact of grain refiner on γ-TiAl intermetallic fabricated by laser-based additive manufacturing , 2021 .

[12]  F. Qiu,et al.  Microstructural configuration and compressive deformation behavior of a TiAl composite reinforced by Mn and in situ Ti2AlC particles , 2021, Materials Science and Engineering: A.

[13]  Zunjie Wei,et al.  The effect of grain refinement and precipitation strengthening induced by Sc or Er alloying on the mechanical properties of cast Al-Li-Cu-Mg alloys at elevated temperatures , 2021, Materials Science and Engineering: A.

[14]  Yu-tao Zhao,et al.  Mechanism of Er inhibiting agglomeration of in situ ZrB2 particles in aluminum matrix composites , 2021 .

[15]  M. Dhanasekaran,et al.  Experimental study on the morphology and hardness variation of TiAl alloy at different heat treatment cycles , 2021 .

[16]  Xiaohong Wang,et al.  Microstructure and compression behavior of in-situ synthesized Ti2AlC reinforced Ti-48Al-2Cr alloy with carbon nanotubes addition , 2021 .

[17]  Piao Gao,et al.  Formability improvement, cracking behavior and control of Y-modified Ti–43Al–4Nb–1Mo-0.1B alloys produced by selective laser melting , 2021 .

[18]  Yuyong Chen,et al.  Influence of nano-Y2O3 addition on microstructure and tensile properties of high-Al TiAl alloys , 2020 .

[19]  I. Goncharov,et al.  Additive Manufacturing of Ti-48Al-2Cr-2Nb Alloy Using Gas Atomized and Mechanically Alloyed Plasma Spheroidized Powders , 2020, Materials.

[20]  J. Lapin,et al.  Comparative Study of Microstructure and Mechanical Properties of Two TiAl-Based Alloys Reinforced with Carbide Particles , 2020, Molecules.

[21]  Yu-tao Zhao,et al.  Microstructure and properties of 6111Al matrix composites reinforced by the cooperation of in situ ZrB2 particles and Y , 2020 .

[22]  C. Cui,et al.  Microstructure evolution and mechanical properties of Ti–46Al–4Nb alloy modified by in-situ Si3N4-graphene core-shell nanoparticles , 2020 .

[23]  S. Kaloshkin,et al.  The effect of Gd addition on the kinetics of α2→γ transformation in γ-TiAl based alloys , 2020, Intermetallics.

[24]  Guoqing Wang,et al.  Cracking behavior and control of β-solidifying Ti-40Al-9V-0.5Y alloy produced by selective laser melting , 2020 .

[25]  Feng,et al.  Effect of C Addition on as-Cast Microstructures of High Nb Containing TiAl Alloys , 2019, Metals.

[26]  Yuan,et al.  Effects of Powder Preparation and Sintering Temperature on Properties of Spark Plasma Sintered Ti-48Al-2Cr-8Nb Alloy , 2019, Metals.

[27]  Y. Liu,et al.  Grinding mechanism and mechanical properties of the in-situ synthesized Al2O3/TiAl composites , 2019, Ceramics International.

[28]  M. Štamborská,et al.  Room temperature mechanical behaviour of cast in-situ TiAl matrix composite reinforced with carbide particles , 2019, Intermetallics.

[29]  Wei Sun,et al.  Interfacial characteristics and mechanical properties of TiAl/Ti6Al4V laminate composite (LMC) fabricated by vacuum hot pressing , 2019, Materials Science and Engineering: A.

[30]  Qian Sun,et al.  Prior particle boundaries and microstructural homogenization of a β-solidifying γ-TiAl alloy fabricated from prealloyed powder , 2018, Materials Science and Engineering: A.

[31]  M. Mathabathe,et al.  The vacuum melted ɣ-TiAl (Nb, Cr, Si)-doped alloys and their cyclic oxidation properties , 2018, Vacuum.

[32]  C. Yan,et al.  Enhanced compressive strength and tailored microstructure of selective laser melted Ti-46.5Al-2.5Cr-2Nb-0.5Y alloy with different boron addition , 2018, Materials Science and Engineering: A.

[33]  J. Lapin,et al.  Processing, microstructure and mechanical properties of in-situ Ti3Al+TiAl matrix composite reinforced with Ti2AlC particles prepared by centrifugal casting , 2018, Intermetallics.

[34]  Ruirun Chen,et al.  Microstructure evolution and mechanical properties of TiAl binary alloys added with SiC fibers , 2018, Intermetallics.

[35]  H. Cui,et al.  Ti2Al(C, N) Solid Solution Reinforcing TiAl-Based Composites: Evolution of a Core-Shell Structure, Interfaces, and Mechanical Properties. , 2018, ACS applied materials & interfaces.

[36]  C. Cui,et al.  Carbon fibers coated with graphene reinforced TiAl alloy composite with high strength and toughness , 2018, Scientific Reports.

[37]  Chunqing Wang,et al.  Microstructure Evolution of a Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y Alloy during Massive Transformation and Subsequent Annealing , 2018 .

[38]  J. Lapin,et al.  Microstructure and mechanical properties of cast in-situ TiAl matrix composites reinforced with (Ti,Nb)2AlC particles , 2017 .

[39]  Bin Chen,et al.  Characterization of Gd-rich precipitates in a fully lamellar TiAl alloy , 2017 .

[40]  S. Xiong,et al.  Microstructure, mechanical properties and fracture mechanism of Ti2AlC reinforced AZ91D composites fabricated by stir casting , 2017 .

[41]  J. Lapin,et al.  Characterization of TiAl based alloys with various content of carbon , 2017 .

[42]  H. Cui,et al.  Lamellar structure and effect of Ti2AlC on properties of prepared in-situ TiAl matrix composites , 2016 .

[43]  Ruirun Chen,et al.  Microstructure and compressive properties of directionally solidified Er-bearing TiAl alloy using cold crucible , 2016 .

[44]  T. Ai,et al.  Design and strengthening behaviour of Ti2AlC/TiAl composite by low-temperature hot-pressing process , 2016 .

[45]  Zhiyong Zhang,et al.  Synthesis and Characterization of TiAl‐Based Nanocomposites by a Melt Electromagnetic Stirring Process , 2015 .

[46]  Svea Mayer,et al.  Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation , 2015 .

[47]  Jun Chen,et al.  Microstructural evolution and mechanical properties of in situ TiB2/Al composites under high-intensity ultrasound , 2015, Rare Metals.

[48]  M. Meratian,et al.  A comparative study of microstructure and high temperature mechanical properties of a β-stabilized TiAl alloy modified by lanthanum and erbium , 2015 .

[49]  R. Hu,et al.  Mechanical properties and microstructure of in situ formed Ti2AlN/TiAl(WMS) composites , 2014, Rare Metals.

[50]  A. Stark,et al.  Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic β-stabilized γ-TiAl based alloy , 2014 .

[51]  Y. Chen,et al.  Effect of cooling rate and Y element on the microstructure of rapidly solidified TiAl alloys , 2010 .

[52]  Ryan B. Wicker,et al.  Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting , 2010 .

[53]  F. Schimansky,et al.  High carbon solubility in a γ-TiAl-based Ti–45Al–5Nb–0.5C alloy and its effect on hardening , 2009 .

[54]  H. Clemens,et al.  Nanometer-scaled lamellar microstructures in Ti–45Al–7.5Nb–(0; 0.5)C alloys and their influence on hardness , 2008 .

[55]  Fu Guo,et al.  Effects of small amount addition of rare earth Er on microstructure and property of SnAgCu solder , 2008 .

[56]  J. Ferreira,et al.  Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis , 2007 .

[57]  C. Fu,et al.  Point defect structures of YAl2 and ZrCo2 Laves phase compounds by first-principles calculations , 2007 .

[58]  V. L. Acoff,et al.  Processing gamma-based TiAl sheet materials by cyclic cold roll bonding and annealing of elemental titanium and aluminum foils , 2006 .

[59]  王芬,et al.  Microstrucmre and mechanical properties of Al2O3/TiAl composite , 2006 .

[60]  Xinhua Wu,et al.  Microstructural refinement in cast TiAl alloys by solid state transformations , 2005 .

[61]  孔凡涛,et al.  Effect of Rare Earth on Microstructure of γ-TiAl Intermetallics , 2003 .

[62]  H. Buchkremer,et al.  The Characterization of Reinforced TiAl Intermetallic with Dispersed Cr Particles Consolidated by HIP , 2002 .

[63]  K. Xia,et al.  The comparison of effects of four rare earth elements additions on structures and grain sizes of Ti-44Al alloy , 2002 .

[64]  Amit K. Ghosh,et al.  Deformation behavior of γ-TiAl composites in the solid and mushy states , 1994 .