Increasing the signal-to-noise ratio in ultrasonic testing of repair welds using the technology of thinned antenna arrays

To test objects of materials with a high level of structural noise, use of thinned antenna arrays (TAAs) that have a large spatial aperture and consist of a small number of elements that are positioned from one another at a distance larger than the wavelength is proposed. A TAA moves over the surface of a tested object and echo signals are recorded during transmission and reception by different pairs of piezoelectric plates. For each transmitter-receiver pair, the measured echo signals are used to reconstruct partial images, which are then coherently added together to form the final image, by the SAFT method. A procedure for calibrating each piezoelectric plate of the TAA in order to determine the coordinates of its center for efficient coherent summation of partial images has been developed. The calibration procedure reduces the requirements for the accuracy of the arrangement of the piezoelectric plates of the TAA on a prism. The use of the technology of TAAs allows one to obtain images of flaws in repair welds with a signal-to-noise ratio (SNR) that is 12 dB higher than the SNR for an image obtained using the technique for a single-element transducer. The results of testing specimens of 800 pipelines with repair welds in weld seams are presented. The efficiency of this method is shown in comparison to the method in which a single-element piezoelectric transducer is used.

[1]  F. Walte,et al.  Quantitative Ultrasonic Testing of Pressurized Components Using Sampling Phased Array , 2006 .

[2]  E. G. Bazulin.  Determining the flaw type from images obtained by the C-SAFT method with account for transformations of wave types upon reflections of ultrasonic pulses from the irregular boundaries of a test object , 2011 .

[4]  E. G. Bazulin.  Obtaining flaw images by the SAFT method taking the variable velocity of sound in a test object into account , 2010 .

[5]  V. G. Kartashev,et al.  The fundamentals of the theory of spatiotemporal signal processing as applied to problems of ultrasonic flaw detection of articles from complexly structured materials , 2010 .

[6]  Emil Wolf,et al.  Principles of Optics: Contents , 1999 .

[7]  Coherent Reconstruction of Flaw Images during Detection of Echo Signals in a Separate Mode , 2005 .

[8]  Yasuo Nosaka,et al.  On Non- Destructive Testing , 1959 .

[9]  M. Jobst,et al.  Demonstration of the Application of the Total Focusing Method to the Inspection of Steel Welds , 2010 .

[10]  Vladimir G. Badalian,et al.  Digital reconstruction of scatterer images by the method of projection in spectral space , 1988 .

[11]  V. G. Badalyan,et al.  Application of super-resolution techniques to expert testing of welded joints in pipelines of nuclear power plants , 2000 .

[12]  Schmitz,et al.  Experiences with synthetic aperture focusing technique in the field , 2000, Ultrasonics.

[13]  E. Iakovleva,et al.  TIME OF FLIGHT INVERSE MATCHING RECONSTRUCTION OF ULTRASONIC ARRAY DATA EXPLOITING FORWARDS MODELS , 2009 .

[14]  Margaret Cheney,et al.  Problems in synthetic-aperture radar imaging , 2009 .

[15]  E. G. Bazulin.  Testing of weld patches in Дy800 pipelines with ultrasonic antenna arrays using the triple scanning method , 2010 .

[16]  E. G. Bazulin,et al.  Application of an ultrasonic antenna array for registering echo signals by the double-scanning method for obtaining flaw images , 2009 .