In situ formed processable polypyrrole nanoparticle/amphiphilic elastomer composites and their properties

A lack of processability is one of the major problems associated with practical applications of conductive and electroactive polypyrrole. Polypyrrole nanoparticles that were sterically stabilized in a solution and supported by an amphiphilic elastomer of poly(ethylene glycol) (Mn 2000 g mol−1)/poly(tetramethylene ether glycol) (Mn 2000 g mol−1) multiblock copolymer, were investigated in terms of conductivity, processability and mechanical properties. The hydrogel, amphiphilic elastomer was soluble in various organic solvents such as methanol, acetone and ethanol, but only swellable in water. The synthetic conditions of polypyrrole nanoparticles in the presence of the multiblock copolymer were optimized. The conductivity of polypyrrole film formed from the nanoparticle suspension was measured with the van der Pauw four-probe method and reached as high as 3.0 ± 0.2 S cm−1. The film also showed elastomeric properties, which were influenced by the amount of multiblock copolymer added during nanoparticle synthesis. Copyright © 2004 Society of Chemical Industry

[1]  Y. Bae,et al.  Hydrogels based on poly(ethylene oxide) and poly(tetramethylene oxide) or poly(dimethyl siloxane): synthesis, characterization, in vitro protein adsorption and platelet adhesion. , 2002, Biomaterials.

[2]  M. Ouyang,et al.  Conductive polymer composites prepared by polypyrrole-coated poly(vinyl chloride) powder: relationship between conductivity and surface morphology , 1998 .

[3]  R. Weiss,et al.  Synthesis of Conductive Nanocomposites by Selective In Situ Polymerization of Pyrrole within the Lamellar Microdomains of a Block Copolymer , 1998 .

[4]  Haihong Li,et al.  Polypyrrole‐carbon fiber composite film prepared by chemical oxidative polymerization of pyrrole , 1997 .

[5]  K. Ogura,et al.  Electrochemical Characterization of Soluble Conducting Polymers as Ion Exchangers , 1997 .

[6]  M. Felisberti,et al.  Thermal, mechanical and electrochemical behaviour of poly(vinyl chloride)/ polypyrrole blends (PVC/PPy) , 1996 .

[7]  D. Y. Kim,et al.  Synthesis of soluble polypyrrole of the doped state in organic solvents , 1995 .

[8]  B. Saunders,et al.  Recent Advances in the Physical and Spectroscopic Properties of Polypyrrole Films, Particularly Those Containing Transition-Metal Complexes as Counteranions , 1995 .

[9]  H. Ishikawa,et al.  Characterization of a tantalum capacitor fabricated with a conducting polypyrrole as a counter electrode , 1994 .

[10]  G. Wallace,et al.  Influence of steric stabilizers on the electropolymerization and properties of polypyrroles , 1994 .

[11]  H. Reichl,et al.  Determination of the areas of a square sample suitable to the resistance measurement by Van der Pauw’s method , 1992 .

[12]  M. Skyllas-Kazacos,et al.  Stability and mechanical properties of electrochemically prepared conducting polypyrrole films , 1989 .

[13]  A. Guiseppi-Elie,et al.  Polypyrrole-hydrogel composites for the construction of clinically important biosensors. , 2002, Biosensors & bioelectronics.

[14]  Y. Kim,et al.  Synthesis and Characterization of Soluble Polypyrrole , 1997 .

[15]  Takakazu Yamamoto,et al.  Microsphere synthesis of polypyrrole by oxidation polymerization , 1996 .

[16]  Wei Zhu,et al.  Polypyrrole—polypropylene composite films: preparation and properties , 1996 .

[17]  E. Ruckenstein,et al.  Processable conductive polypyrrole/poly(alkyl methacrylate) composites prepared by an emulsion pathway , 1993 .