Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic

In this paper, we have analyzed parts of printed circuit board (PCB) and liquid crystal display (LCD) screens of mobile phones and computers, quantitative and qualitative chemical compositions of individual components, and complete PCBs were determined. Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) methods were used to determine the temperatures of phase transformations, whereas qualitative and quantitative compositions of the samples were determined by X-ray fluorescence spectrometry (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), and scanning electron microscopy (SEM)-energy dispersive X-ray spectrometry (EDS) analyses. The microstructure of samples was studied by optical microscopy. Based on results of the analysis, a procedure for recycling PCBs is proposed. The emphasis was on the effects that can be achieved in the recycling process by extraction of some parts before the melting process. In addition, newly developed materials can be an adequate substitute for some of the dangerous and harmful materials, such as lead and arsenic are proposed, which is in accordance with the European Union (EU) Restriction of the use of certain hazardous substances (RoHS) directive as well as some alternative materials for use in the electronics industry instead of gold and gold alloys.

[1]  Li Jing-ying,et al.  Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones. , 2012, Waste management.

[2]  G. Graham,et al.  Hazardous waste minimization at tinker AFB , 1992 .

[3]  A. Bett,et al.  Fabrication and simulation of GaSb thermophotovoltaic cells , 2001 .

[4]  C. Leinenbach,et al.  Thermodynamic modeling of the Au–Ge–Sn ternary system , 2003 .

[5]  Malek Bouharkat,et al.  Crystallographic study of the intermediate compounds SbZn, Sb3Zn4 and Sb2Zn3 , 2006 .

[6]  H M Freeman,et al.  Hazardous waste minimization. A strategy for environmental improvement. , 1988, JAPCA.

[7]  Balakrishnan Ramesh Babu,et al.  Electrical and electronic waste: a global environmental problem. , 2007, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[8]  Denise Crocce Romano Espinosa,et al.  Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers. , 2011, Waste management.

[9]  V. Subramanian,et al.  Investigation of Gold Nanoparticle Inks for Low-Temperature Lead-Free Packaging Technology , 2009 .

[10]  M. Ferenets,et al.  Thin Solid Films , 2010 .

[11]  Stefan Salhofer,et al.  Recycling of flat screens as a new challenge , 2012 .

[12]  Kenichi Nakajima,et al.  Evaluation Method of Metal Resource Recyclability Based on Thermodynamic Analysis , 2009 .

[13]  O Osibanjo,et al.  Toxicity characterization of waste mobile phone plastics. , 2009, Journal of hazardous materials.

[15]  J. Santailler,et al.  GaSb Crystals and Wafers for Photovoltaic Devices , 2007 .

[16]  Oladele Osibanjo,et al.  Overview of electronic waste (e-waste) management practices and legislations, and their poor applications in the developing countries , 2008 .

[17]  Reid Lifset,et al.  Dining at the periodic table: metals concentrations as they relate to recycling. , 2007, Environmental science & technology.

[18]  Milisav Ranitović,et al.  Hydrometallurgical process for extraction of metals from electronic waste, Part I: Material characterization and process option selection , 2009 .

[19]  Takahiro Ito,et al.  Development of Ga-doped ZnO transparent electrodes for liquid crystal display panels , 2012 .

[20]  B. D. Pandey,et al.  Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. , 2011, Journal of hazardous materials.

[21]  G. Zanicchi,et al.  Wetting behaviour and reactivity of lead free Au–In–Sn and Bi–In–Sn alloys on copper substrates , 2007 .

[22]  H. S. Liu,et al.  Thermodynamic modeling of the Au-In-Sb ternary system , 2003 .

[23]  Martin Goosey,et al.  Environment-friendly electronics: lead free technology , 2002 .

[24]  Paul T. Williams,et al.  Separation and recovery of materials from scrap printed circuit boards , 2007 .

[25]  Angela C Kasper,et al.  Printed wiring boards for mobile phones: characterization and recycling of copper. , 2011, Waste management.