3D printing of porous alginate/gelatin hydrogel scaffolds and their mechanical property characterization

ABSTRACT Hydrogel scaffolds with well-defined internal structure and interconnected porosity are important for tissue engineering. A three-dimensional bioplotting technique supplemented with thermal/submerged ionic crosslinking process was used to fabricate hydrogel scaffolds. Six scaffold geometries were fabricated and their influence on mechanical performance was investigated. The 0/90–0.8 group with the lowest porosity showed the highest Young’s modulus while the Shift group showed the lowest Young’s modulus. Same trend has also been observed for the dynamic modulus of each group. Results demonstrated that the mechanical performance of hydrogel scaffolds can be tuned by changing the internal structure parameters including strands orientation and spacing between strands. GRAPHICAL ABSTRACT

[1]  S. Hollister.  Porous scaffold design for tissue engineering , 2005, Nature materials.

[2]  Rui L Reis,et al.  Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency. , 2011, Acta biomaterialia.

[3]  Antonios G Mikos,et al.  Gelatin as a delivery vehicle for the controlled release of bioactive molecules. , 2005, Journal of controlled release : official journal of the Controlled Release Society.

[4]  Noor Azuan Abu Osman,et al.  Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering , 2014, PloS one.

[5]  G A Ateshian,et al.  Mechanical response of bovine articular cartilage under dynamic unconfined compression loading at physiological stress levels. , 2004, Osteoarthritis and cartilage.

[6]  J. Kopeček.  Hydrogel biomaterials: a smart future? , 2007, Biomaterials.

[7]  Yongxiang Luo,et al.  Concentrated gelatin/alginate composites for fabrication of predesigned scaffolds with a favorable cell response by 3D plotting , 2015 .

[8]  Gianaurelio Cuniberti,et al.  Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. , 2011, Acta biomaterialia.

[9]  Hyeongjin Lee,et al.  Functional cell-laden alginate scaffolds consisting of core/shell struts for tissue regeneration. , 2013, Carbohydrate polymers.

[10]  Farshid Guilak,et al.  Chondrogenic differentiation of adipose-derived adult stem cells in agarose, alginate, and gelatin scaffolds. , 2004, Biomaterials.

[11]  P. Dubruel,et al.  The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.

[12]  Peter Dubruel,et al.  A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. , 2012, Biomaterials.

[13]  C. Armstrong,et al.  In vitro measurement of articular cartilage deformations in the intact human hip joint under load. , 1979, The Journal of bone and joint surgery. American volume.

[14]  D. Wendt,et al.  The role of bioreactors in tissue engineering. , 2004, Trends in biotechnology.

[15]  GeunHyung Kim,et al.  Cells (MC3T3-E1)-laden alginate scaffolds fabricated by a modified solid-freeform fabrication process supplemented with an aerosol spraying. , 2012, Biomacromolecules.

[16]  A. Khademhosseini,et al.  Hydrogels in Regenerative Medicine , 2009, Advanced materials.

[17]  Alessandro Giacomello,et al.  Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells. , 2012, Biomaterials.

[18]  Rolf Mülhaupt,et al.  Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer‐assisted design combined with computer‐guided 3D plotting of polymers and reactive oligomers , 2000 .

[19]  Ajay Rajaram,et al.  Use of the polycation polyethyleneimine to improve the physical properties of alginate–hyaluronic acid hydrogel during fabrication of tissue repair scaffolds , 2015, Journal of biomaterials science. Polymer edition.

[20]  A. Boccaccini,et al.  Fabrication of alginate-gelatin crosslinked hydrogel microcapsules and evaluation of the microstructure and physico-chemical properties. , 2014, Journal of materials chemistry. B.

[21]  B. Diehl-seifert,et al.  Alginate/silica composite hydrogel as a potential morphogenetically active scaffold for three-dimensional tissue engineering , 2013 .

[22]  J. Weng,et al.  Synthesis of an RGD-grafted oxidized sodium alginate-N-succinyl chitosan hydrogel and an in vitro study of endothelial and osteogenic differentiation. , 2013, Journal of materials chemistry. B.

[23]  D. Jones,et al.  Dynamic mechanical analysis of polymeric systems of pharmaceutical and biomedical significance. , 1999, International journal of pharmaceutics.

[24]  R. Tuan,et al.  Transient exposure to transforming growth factor beta 3 improves the mechanical properties of mesenchymal stem cell-laden cartilage constructs in a density-dependent manner. , 2009, Tissue engineering. Part A.

[25]  Xiongbiao Chen,et al.  Fabrication and Osteogenesis of a Porous Nanohydroxyapatite/Polyamide Scaffold with an Anisotropic Architecture. , 2015, ACS biomaterials science & engineering.

[26]  M. Juliano,et al.  Enzymatic, physicochemical and biological properties of MMP-sensitive alginate hydrogels , 2013 .