New MOS-C realization of transadmittance type all-pass filter using modified CBTA

This paper reports a new CMOS realization of transadmittance type first-order all-pass filter using an active building block called modified current backward transconductance amplifier (MCBTA). With a simple matching condition, the proposed filter can be created using only one MCBTA, one grounded capacitor, and one grounded resistor, which leads to a compact circuit implementation. The current output available at high-output impedance terminal enables simple cascadibility to subsequent current-mode circuits. Using 0.35 μm TSMC CMOS technology parameters, SPICE simulation results have validated the workability of the proposed circuit.

[1]  Pavan Kumar Hanumolu,et al.  Constant transconductance bias circuit with an on-chip resistor , 2006, 2006 IEEE International Symposium on Circuits and Systems.

[2]  Dalibor Biolek,et al.  Allpass filter employing one grounded capacitor and one active element , 2009 .

[3]  Sudhanshu Maheshwari.  High input impedance voltage-mode first-order all-pass sections , 2008 .

[4]  Hakan Kuntman,et al.  High-output-impedance transadmittance type continuous-time multifunction filter with minimum active elements , 2001 .

[5]  Wanlop Surakampontorn,et al.  Temperature compensation of translinear current conveyor and OTA , 1998 .

[6]  Umut Engin Ayten,et al.  Current and voltage transfer function filters using a single active device , 2010, IET Circuits Devices Syst..

[7]  N. A. Shah,et al.  SITO High Output Impedance Transadmittance Filter Using FTFNs , 2004 .

[8]  Umut Engin Ayten,et al.  Current mode leapfrog ladder filters using a new active block , 2010 .

[9]  Mehmet Sagbas.  Component reduced floating ±L, ±C and ±R simulators with grounded passive components , 2011 .

[10]  Jan Jerabek,et al.  Voltage-Mode All-Pass Filters Using Universal Voltage Conveyor and MOSFET-Based Electronic Resistors , 2011 .

[11]  Nisar A. Shah,et al.  Lowpass and bandpass transadmittance filter using operational amplifier pole , 2005 .

[12]  Uğur Çam.  A New Transadmittance Type First-Order Allpass Filter Employing Single Third Generation Current Conveyor , 2005 .

[13]  S. Minaei,et al.  Electronically tunable MOSFET-C voltage-mode all-pass filter based on universal voltage conveyor , 2011, 2011 IEEE 3rd International Conference on Communication Software and Networks.

[14]  Dalibor Biolek,et al.  First-order voltage-mode all-pass filter employing one active element and one grounded capacitor , 2010 .

[15]  Kamil Vrba,et al.  A new compact CMOS realization of sinusoidal oscillator using a single modified CBTA , 2011, Proceedings of 21st International Conference Radioelektronika 2011.

[16]  Abhirup Lahiri,et al.  A Novel First-Order Current-Mode All-Pass Filter Using CDTA , 2009 .

[17]  O. Cicekoglu,et al.  DDCC based all-pass filters using minimum number of passive elements , 2007, 2007 50th Midwest Symposium on Circuits and Systems.

[18]  K. Vrba,et al.  Differential-input buffered and transconductance amplifier (DBTA)-based new trans-admittance- and voltage-mode first-order all-pass filters , 2009, 2009 International Conference on Electrical and Electronics Engineering - ELECO 2009.

[19]  Z. Wang,et al.  2-MOSFET transresistor with extremely low distortion for output reaching supply voltages , 1990 .