Evaluation of numerical schemes using different simulation methods for the continuous phase modeling of cyclone separators

[1]  B. Launder,et al.  Progress in the development of a Reynolds-stress turbulence closure , 1975, Journal of Fluid Mechanics.

[2]  J. P. V. Doormaal,et al.  ENHANCEMENTS OF THE SIMPLE METHOD FOR PREDICTING INCOMPRESSIBLE FLUID FLOWS , 1984 .

[3]  R. Clift,et al.  Effects of geometry and solid loading on the performance of gas cyclones , 1992 .

[4]  F. Lien,et al.  Assessment of turbulence-transport models including non-linear rng eddy-viscosity formulation and second-moment closure for flow over a backward-facing step , 1994 .

[5]  Hideto Yoshida,et al.  Three-dimensional simulation of air cyclone and particle separation by a revised-type cyclone , 1996 .

[6]  W. D. Griffiths,et al.  Computational fluid dynamics (CFD) and empirical modelling of the performance of a number of cyclone samplers , 1996 .

[7]  J. Derksen,et al.  An experimental and numerical study of turbulent swirling flow in gas cyclones , 1999 .

[8]  C. Fredriksson.  Exploratory experimental and theoretical studies of cyclone gasification of wood powder , 1999 .

[9]  Henry França Meier,et al.  Anisotropic behavior of the Reynolds stress in gas and gas–solid flows in cyclones , 1999 .

[10]  A. Hoekstra,et al.  Gas flow field and collection efficiency of cyclone separators , 2000 .

[11]  F. Boysan,et al.  Advances in Cyclone Modelling Using Unstructured Grids , 2000 .

[12]  P. Sagaut.  BOOK REVIEW: Large Eddy Simulation for Incompressible Flows. An Introduction , 2001 .

[14]  Jos Derksen,et al.  Separation performance predictions of a Stairmand high‐efficiency cyclone , 2003 .

[15]  Lian-Ze Wang,et al.  Numerical Study of Gas Phase Flow in Cyclones with the Repds , 2004 .

[16]  Silvia A. Nebra,et al.  The cyclonic dryer: a numerical and experimental analysis of the influence of geometry on average particle residence time , 2004 .

[17]  Ahmadun Fakhru’l-Razi,et al.  The influence of temperature and inlet velocity on cyclone pressure drop: a CFD study , 2004 .

[18]  Irfan Karagoz,et al.  Modelling of the Pressure Drop in Tangential Inlet Cyclone Separators , 2005 .

[19]  R. Xiang,et al.  Numerical Simulation of Flow Patterns in Cyclones of Different Cone Dimensions , 2005 .

[20]  Ahmadun Fakhru’l-Razi,et al.  A CFD Study on the Prediction of Cyclone Collection Efficiency , 2005 .

[21]  H. Shalaby,et al.  Comparative study of the continuous phase flow in a cyclone separator using different turbulence models , 2005 .

[22]  Ahmadun Fakhru’l-Razi,et al.  Prediction of the effects of cone tip diameter on the cyclone performance , 2005 .

[23]  M. Powell,et al.  A CFD simulation of a single phase hydrocyclone flow field , 2005 .

[24]  Jin-Do Chung,et al.  A numerical and experimental study on a high efficiency cyclone dust separator for high temperature and pressurized environments , 2005 .

[25]  Mingyao Zhang,et al.  Effects of the prolonged vertical tube on the separation performance of a cyclone. , 2006, Journal of hazardous materials.

[26]  H. Shalaby,et al.  Particle-Laden Flow Simulation in a Cyclone Separator , 2006 .

[27]  Jin W. Lee,et al.  Effect of the cylinder shape of a long-coned cyclone on the stable flow-field establishment , 2006 .

[28]  Cristóbal Cortés,et al.  Modeling the gas and particle flow inside cyclone separators , 2007 .

[29]  Guang Chen,et al.  Numerical study of the separation characteristics in a cyclone of different inlet particle concentrations , 2007, Comput. Chem. Eng..

[30]  Evaluations and Modifications on Reynolds Stress Model in Cyclone Simulations , 2007 .

[32]  Alex C. Hoffmann,et al.  Gas Cyclones and Swirl Tubes: Principles, Design, and Operation , 2007 .

[33]  Christian Jordan,et al.  Influence of Vortex-Finder Diameter on Axial Gas Flow in Simple Cyclone , 2008 .

[34]  F. Kaya,et al.  Performance analysis of numerical schemes in highly swirling turbulent flows in cyclones , 2008 .

[35]  Jolius Gimbun,et al.  CFD Simulation of Aerocyclone Hydrodynamics and Performance at Extreme Temperature , 2008 .

[36]  J. Derksen,et al.  Two-Way Coupled Large-Eddy Simulations of the Gas-Solid Flow in Cyclone Separators , 2008 .

[37]  A. F. Najafi,et al.  Numerical simulations of gas–liquid–solid flows in a hydrocyclone separator , 2009 .

[38]  Sudipto Chakraborty,et al.  Studies on the understanding mechanism of air core and vortex formation in a hydrocyclone , 2008 .

[39]  Irfan Karagoz,et al.  Numerical investigation of performance characteristics of a cyclone prolonged with a dipleg , 2009 .

[40]  Yanpeng Wu,et al.  Effects of the inlet section angle on the separation performance of a cyclone , 2009 .

[41]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.