Modelling of heat transfer with the random walk method. Part 2. Application to thermal energy storage in fractured aquifers

Abstract This study examines the application of the random walk method of resolution in the modelling of thermal energy storage in fractured aquifers. The media under consideration have a high degree of fracturing but a low porosity (the aperture of the fracture is small in relation to its overall extent). The customary method of resolution developed to investigate the transport phenomenon in such fractured media is first presented briefly. Next, the stochastic equations of the energy displacement in fractured aquifers are developed depending on the statistical location of the energy particles in the media. A stochastic approach is used to determine the flow velocity field. The method is applied to different configurations of fracture networks for a single-well system of aquifer thermal energy storage. The temperature fields corresponding to a fractured aquifer and its equivalent porous configuration are compared. An equivalent porous medium is not an adequate substitute for a fractured aquifer in such modelling. The effect of the porosity on the energy storage is obvious: the temperature of the extracted water and the energy recovery factor increase with the fracture porosity. Except in a highly anisotropic medium, the orientation distribution of the fractures has little effect on the heat transfer in an aquifer without regional flow. In the presence of a natural hydraulic gradient, the energy recovery factor tends towards zero and the production temperature towards the original ambient temperature of the aquifer. In this case, a charge-and-discharge well pair proves to be a suitable alternative to the single-well system.

[1]  Louis Theodore,et al.  Developments In Water Science , 1980 .

[2]  A. C. Gringarten,et al.  A theoretical study of heat extraction from aquifers with uniform regional flow , 1975 .

[3]  J. Long,et al.  From field data to fracture network modeling: An example incorporating spatial structure , 1987 .

[4]  B. Mathey.  Development and resorption of a thermal disturbance in a phreatic aquifer with natural convection , 1977 .

[5]  A. Gringarten,et al.  Sensible energy storage in aquifers: 1. Theoretical study , 1982 .

[6]  G. Marsily,et al.  Modeling fracture flow with a stochastic discrete fracture network: calibration and validation: 1. The flow model , 1990 .

[7]  T. E. Dwyer,et al.  Finite-element simulation of low-temperature, heat-pump-coupled, aquifer thermal energy storage , 1987 .

[8]  Allen M. Shapiro,et al.  Simulation of steady-state flow in three-dimensional fracture networks using the boundary-element method , 1985 .

[9]  A. Willemsen,et al.  Environmental Impacts of Aquifer Thermal Energy Storage (ATES): Modelling of the Transport of Energy and Contaminants from the Store , 1989 .

[10]  Björn Dverstorp,et al.  Conditional simulations of fluid flow in three-dimensional networks of discrete fractures , 1987 .

[11]  Arnold W. Heemink,et al.  Stochastic modelling of dispersion in shallow water , 1990 .

[12]  Andrew F. B. Tompson,et al.  Numerical simulation of solute transport in three-dimensional, randomly heterogeneous porous media , 1990 .

[13]  K. Semra,et al.  Three dimensional groundwater quality modelling in heterogeneous media , 1970 .

[14]  Gerard J. M. Uffink,et al.  Modeling of Solute Transport with the Random Walk Method , 1988 .

[15]  E. Custodio,et al.  Groundwater flow and quality modelling , 1988 .

[16]  Charles R. Faust,et al.  Finite element techniques for modeling groundwater flow in fractured aquifers , 1983 .

[17]  Franklin W. Schwartz,et al.  A Stochastic Analysis of Macroscopic Dispersion in Fractured Media , 1983 .

[18]  T. A. Prickett,et al.  A "random-walk" solute transport model for selected groundwater quality evaluations , 1981 .

[19]  W. Kinzelbach.  Modelling of the Transport of Chlorinated Hydrocarbon Solvents in Groundwater: A Case Study , 1985 .

[20]  W. Kinzelbach,et al.  The Random Walk Method in Pollutant Transport Simulation , 1988 .

[21]  P. Witherspoon,et al.  Porous media equivalents for networks of discontinuous fractures , 1982 .

[22]  P. Ackerer,et al.  Random-Walk Method to Simulate Pollutant Transport in Alluvial Aquifers or Fractured Rocks , 1988 .

[23]  Peter Lund,et al.  Modeling and simulation of aquifer storage energy systems , 1994 .

[24]  Kiyosi Itô.  Stochastic Differential Equations , 2018, The Control Systems Handbook.

[25]  A boundary element—Random walk model of mass transport in groundwater , 1986 .

[26]  H. Kimura,et al.  Validation studies of tracer tests in a fracture zone at the Finnsjön research area , 1992 .

[27]  Wolfgang Kinzelbach,et al.  The Random Walk Method and Extensions in Groundwater Modelling , 1991 .

[28]  Olaf Kolditz,et al.  Modelling flow and heat transfer in fractured rocks: conceptual model of a 3-D deterministic fracture network , 1995 .

[29]  Emmanuel Ledoux,et al.  Modeling fracture flow with a stochastic discrete fracture network: Calibration and validation: 2. The transport model , 1990 .

[30]  M. Combarnous.  Hydrothermal Convection in Saturated Porous Media , 1975 .

[31]  Paul A. Witherspoon,et al.  A Model for Steady Fluid Flow in Random Three‐Dimensional Networks of Disc‐Shaped Fractures , 1985 .

[32]  P. Lund,et al.  Radiation transmission measurements for solar ponds , 1984 .