Froth Treatment in Athabasca Oil Sands Bitumen Recovery Process: A Review

Bitumen froth treatment is an integrated process step in the Athabasca oil sands bitumen recovery operations. Its objective is to separate mineral solids and water from the bitumen froth. The bitumen froth is diluted with naphthenic or paraffinic solvents to lower its viscosity to facilitate the separation; therefore, bitumen froth treatment is the removal of inorganics (mineral particles and water droplets) from a bitumen organic solvent solution. The micrometer sized mineral particles (mainly clays) and water-in-oil emulsion droplets are the most difficult to remove from the bitumen froth. Research has been carried out that has led to an understanding of the formation, stabilization and properties of the water-in-oil emulsions in the bitumen organic solvent solution. It is known that the water-in-oil emulsions are formed by water entrained into the bitumen froth during the water-based extraction process and stabilized by natural surfactants in bitumen (especially asphaltene) and fine mineral particles. ...

[1]  D. D. Eley,et al.  Emulsions of water in asphaltene-containing oils 1. Droplet size distribution and emulsification rates , 1988 .

[2]  Taolei Sun,et al.  Influence of demulsifiers of different structures on interfacial dilational properties of an oil-water interface containing surface-active fractions from crude oil. , 2002, Journal of colloid and interface science.

[3]  Laurier L. Schramm,et al.  The influence of solvent and demulsifier additions on nascent froth formation during flotation recovery of Bitumen from Athabasca oil sands , 2001 .

[4]  C. W. Angle,et al.  Precipitation of asphaltenes from solvent-diluted heavy oil and thermodynamic properties of solvent-diluted heavy oil solutions , 2006 .

[5]  James A. Finch,et al.  Wettability of fine solids extracted from bitumen froth , 1999 .

[6]  D. Madge,et al.  Process reagents for the enhanced removal of solids and water from oil sand froth , 2005 .

[7]  W. Shelfantook.  A Perspective on the Selection of Froth Treatment Processes , 2008 .

[8]  O. Mullins,et al.  Molecular Size and Structure of Asphaltenes from Various Sources , 2000 .

[9]  D. Kirpalani,et al.  CFD approach for simulation of bitumen froth settling process – Part I: Hindered settling of aggregates , 2008 .

[10]  O. Mullins,et al.  Asphaltenes, Heavy Oils, and Petroleomics , 2006 .

[11]  F. Rondelez,et al.  Two-Step Adsorption of Endogenous Asphaltenic Surfactants at the Bitumen–Water Interface , 2012 .

[12]  Zhenghe Xu,et al.  Langmuir and Langmuir−Blodgett Films of Mixed Asphaltene and a Demulsifier , 2003 .

[13]  Hussein,et al.  Water-in-Hydrocarbon Emulsions Stabilized by Asphaltenes at Low Concentrations. , 2000, Journal of colloid and interface science.

[14]  Zhenghe Xu,et al.  Novel Magnetic Demulsifier for Water Removal from Diluted Bitumen Emulsion , 2012 .

[15]  C. Noik,et al.  Elastic properties of crude oil/water interface in presence of polymeric emulsion breakers , 2005 .

[16]  D. Madge,et al.  Theory of asphaltene precipitation in a hydrocarbon cyclone , 2007 .

[17]  J. Masliyah,et al.  On the interfacial properties of micrometre–sized water droplets in crude oil , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[18]  T. Dąbroś,et al.  Possible Role of Asphaltenes in the Stabilization of Water-in-Crude Oil Emulsions , 2012 .

[19]  H. Yarranton,et al.  The Stabilization of Water-in-Hydrocarbon Emulsions by Asphaltenes and Resins , 2001 .

[20]  Clarence A. Miller,et al.  Wettability Alteration of Clay in Solid-Stabilized Emulsions , 2011 .

[21]  K. A. Clark,et al.  Hot Water Seperation of Bitumen from Alberta Bituminous Sand , 1932 .

[22]  Settling Properties of Aggregates in Paraffinic Froth Treatment , 2012 .

[23]  D. N. Madge,et al.  Hydrocarbon cyclones in hydrophilic oil sand environments , 2004 .

[24]  T. Dąbroś,et al.  Structure of water/solids/asphaltenes aggregates and effect of mixing temperature on settling rate in solvent-diluted bitumen , 2004 .

[25]  P. Rahimi,et al.  Molecular Weight and Specific Gravity Distributions for Athabasca and Cold Lake Bitumens and Their Saturate, Aromatic, Resin, and Asphaltene Fractions , 1999 .

[26]  Yeung,et al.  Emulsification through Area Contraction. , 1999, Journal of colloid and interface science.

[27]  Harvey W. Yarranton,et al.  Investigation of Oil Sands Froth Treatment , 2008 .

[28]  Clarence A. Miller,et al.  Effects of Clay Wettability and Process Variables on Separation of Diluted Bitumen Emulsion , 2011 .

[29]  Tadeusz Dabros,et al.  Stability and settling characteristics of solvent-diluted bitumen emulsions☆ , 2002 .

[30]  M. Ese,et al.  An atomic force microscopy study of asphaltenes on mica surfaces. Influence of added resins and demulsifiers , 2000 .

[31]  H. Yarranton,et al.  Asphaltene self-association and water-in-hydrocarbon emulsions. , 2003, Journal of colloid and interface science.

[32]  K. Moran,et al.  On the Stabilization Mechanism of Water-in-Oil Emulsions in Petroleum Systems , 2005 .

[33]  Xiuyu Wang,et al.  Role of Acid Components and Asphaltenes in Wyoming Water-in-Crude Oil Emulsions , 2011 .