Transport Phenomena in Two-Phase Micro-Channel Heat Sinks

[1]  J. C. Chen.  Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow , 1966 .

[2]  Issam Mudawar.  Assessment of high-heat-flux thermal management schemes , 2001 .

[3]  I. Mudawar,et al.  Ultra-high critical heat flux (CHF) for subcooled water flow boiling—I: CHF data and parametric effects for small diameter tubes , 1999 .

[4]  S. M. Ghiaasiaan,et al.  The onset of flow instability in uniformly heated horizontal microchannels , 2000 .

[5]  Y. Zohar,et al.  Forced convection boiling in a microchannel heat sink , 2001 .

[6]  I. Mudawar,et al.  Two-Phase Electronic Cooling Using Mini-Channel and Micro-Channel Heat Sinks: Part 2—Flow Rate and Pressure Drop Constraints , 1994 .

[7]  J. Thome,et al.  Convective Boiling and Condensation , 1972 .

[8]  D. Chisholm.  Two-Phase Flow in Pipelines and Heat Exchangers , 1983 .

[9]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[10]  J. Taborek,et al.  Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model , 1992 .

[11]  Issam Mudawar,et al.  High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks , 1994 .

[12]  J. Thom,et al.  Prediction of pressure drop during forced circulation boiling of water , 1964 .

[13]  I. Mudawar,et al.  Analysis of three-dimensional heat transfer in micro-channel heat sinks , 2002 .

[14]  I. Mudawar,et al.  Ultra-high critical heat flux (CHF) for subcooled water flow boiling—II: high-CHF database and design equations , 1999 .

[15]  Issam Mudawar,et al.  Two-Phase Electronic Cooling Using Mini-Channel and Micro-Channel Heat Sinks: Part 1—Design Criteria and Heat Diffusion Constraints , 1994 .

[16]  A. E. Bergles,et al.  Review of two-phase flow instability , 1973 .

[17]  X. Peng,et al.  Forced convection and flow boiling heat transfer for liquid flowing through microchannels , 1993 .

[18]  M. Shah.  Chart correlation for saturated boiling heat transfer: Equations and further study , 1982 .

[19]  R. Winterton,et al.  A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation , 1991 .

[20]  S. Kandlikar.  A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes , 1990 .

[21]  John-Chang Chen,et al.  Analytic representation of convective boiling functions , 1984 .

[22]  Issam Mudawar,et al.  Thermal design methodology for high-heat-flux single-phase and two-phase micro-channel heat sinks , 2003 .

[23]  I. Mudawar,et al.  Pumpless Loop for Narrow Channel and Micro-Channel Boiling compact cooling system is examined which capitalizes upon fluid density differences , 2003 .

[24]  I. Mudawar,et al.  Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink , 2002 .

[25]  F. Gerner,et al.  Developing convective heat transfer in deep rectangular microchannels , 1999 .

[26]  T. S. Ravigururajan.  Impact of Channel Geometry on Two-Phase Flow Heat Transfer Characteristics of Refrigerants in Microchannel Heat Exchangers , 1998 .

[27]  J. Zemel,et al.  Analysis of microchannels for integrated cooling , 1992 .

[28]  R. Jaeger,et al.  Heat sink optimization with application to microchannels , 1992 .

[29]  R. Lockhart.  Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes , 1949 .

[30]  Issam Mudawar,et al.  Prediction and measurement of incipient boiling heat flux in micro-channel heat sinks , 2002 .

[31]  R. Viskanta,et al.  Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging , 2000 .