The influence of Thomson effect in the performance optimization of a two stage thermoelectric generator

In this paper, the exoreversible and irreversible thermodynamic models of a TTEG (two stage thermoelectric Generator) considering Thomson effect combined with Peltier, Joule and Fourier heat conduction have been investigated using exergy analysis. The expressions for interstage temperature, optimum current for the maximum power output condition and energy/exergy efficiency of a TTEG are derived. The number of thermocouples in the first and second stages of a TTEG for the maximum power output and energy/exergy efficiency conditions are optimized as well. The results show that the exergy efficiency of TTEG is greater than the energy efficiency. In an irreversible TTEG with 30 thermocouples, and with heat source temperature (TH) of 450 K and heat sink temperature (TC) of 300 K, the obtained maximum power output, maximum energy and exergy efficiency are 0.2996 W, 4.35% and 13.05% respectively. It has also been proved that the optimum number of thermocouples obtained in the first and second stages of a TTEG are different from the previous studies because of the influence of Thomson effect. This study will help in the designing of the actual multistage thermoelectric generator systems.

[1]  Fengrui Sun,et al.  Effect of heat transfer on the performance of thermoelectric generator-driven thermoelectric refrigerator system , 2012 .

[2]  D. Rowe.  CRC Handbook of Thermoelectrics , 1995 .

[3]  Lingen Chen,et al.  Performance analysis for two-stage TEC system driven by two-stage TEG obeying Newton's heat transfer law , 2010, Math. Comput. Model..

[4]  Mohammad Biglarbegian,et al.  Effect of Convection Heat Transfer on Performance of Waste Heat Thermoelectric Generator , 2015 .

[5]  Lasse Rosendahl,et al.  Irreversible transfer processes of thermoelectric generators , 2007 .

[6]  S. C. Kaushik,et al.  Performance Optimization of Two-Stage Exoreversible Thermoelectric Converter in Electrically Series and Parallel Configuration , 2015, Journal of Electronic Materials.

[7]  Lingen Chen,et al.  Multiobjective analyses of physical dimension on the performance of a TEG–TEC system , 2010 .

[8]  L. Rosendahl,et al.  A three-dimensional numerical model of thermoelectric generators in fluid power systems , 2011 .

[9]  Yuehong Su,et al.  A study on incorporation of thermoelectric modules with evacuated-tube heat-pipe solar collectors , 2012 .

[10]  S. C. Kaushik,et al.  The influence of Thomson effect in the performance optimization of a two stage thermoelectric cooler , 2015 .

[11]  Fengrui Sun,et al.  Performance characteristics of a multi-element thermoelectric generator with radiative heat transfer law , 2012 .

[12]  Fengrui Sun,et al.  Effect of heat transfer on the performance of two-stage semiconductor thermoelectric refrigerators , 2005 .

[13]  C. Lertsatitthanakorn,et al.  Thermodynamic Analysis of a Compact Thermoelectric Air Conditioner , 2014, Journal of Electronic Materials.

[14]  Zijun Yan,et al.  The influence of Thomson effect on the maximum power output and maximum efficiency of a thermoelectric generator , 1996 .

[15]  S. C. Kaushik,et al.  Exergetic analysis and performance evaluation of parabolic trough concentrating solar thermal power plant (PTCSTPP) , 2012 .

[16]  Sun Feng-rui,et al.  A numerical model and comparative investigation of a thermoelectric generator with multi-irreversibi , 2011 .

[17]  Wei-Hsin Chen,et al.  Design of heat sink for improving the performance of thermoelectric generator using two-stage optimization , 2012 .

[18]  R. Y. Nuwayhid,et al.  On entropy generation in thermoelectric devices , 2000 .

[19]  Fengrui Sun,et al.  Effect of heat transfer on the performance of thermoelectric generators , 2002 .

[20]  Xiaolong Gou,et al.  Detailed Modeling and Irreversible Transfer Process Analysis of a Multi-Element Thermoelectric Generator System , 2011 .

[21]  Ibrahim Dincer,et al.  Exergy: Energy, Environment and Sustainable Development , 2007 .

[22]  C. B. Vining.  An inconvenient truth about thermoelectrics. , 2009, Nature materials.

[23]  L. Chen,et al.  A novel configuration and performance for a two-stage thermoelectric heat pump system driven by a two-stage thermoelectric generator , 2009 .

[24]  Sudhanshu Sharma,et al.  Exergy analysis of single‐stage and multi stage thermoelectric cooler , 2014 .

[25]  J.K. Pedersen,et al.  Numerical Modeling of Thermoelectric Generators With Varing Material Properties in a Circuit Simulator , 2009, IEEE Transactions on Energy Conversion.

[26]  S. Sieniutycz,et al.  Thermodynamic Optimization of Finite-Time Processes , 2000 .

[27]  Lingen Chen,et al.  Modeling and performance analysis of a two-stage thermoelectric energy harvesting system from blast furnace slag water waste heat , 2014 .

[28]  Fengrui Sun,et al.  Multivariable optimization of two-stage thermoelectric refrigerator driven by two-stage thermoelectric generator with external heat transfer , 2010 .

[29]  Fengrui Sun,et al.  Performance optimization of a two-stage semiconductor thermoelectric-generator , 2005 .

[30]  Xiaolong Gou,et al.  Modeling, experimental study and optimization on low-temperature waste heat thermoelectric generator system , 2010 .

[31]  J. Szargut.  Exergy Method: Technical and Ecological Applications , 2005 .

[32]  Bjarne Andresen,et al.  Thermodynamics for Processes in Finite Time , 1984 .

[33]  S. C. Kaushik,et al.  Thermodynamic studies and maximum power point tracking in thermoelectric generator-thermoelectric cooler combined system , 2015 .

[34]  A. Bejan.  Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes , 1996 .

[35]  S. C. Kaushik,et al.  Energy and exergy analysis of thermoelectric heat pump system , 2015 .

[36]  Lingen Chen,et al.  Thermoelectric power generation driven by blast furnace slag flushing water , 2014 .

[37]  Fengrui Sun,et al.  Performance optimization for a two-stage thermoelectric heat-pump with internal and external irreversibilities , 2008 .

[38]  Kim Choon Ng,et al.  The maximum temperature difference and polar characteristic of two-stage thermoelectric coolers , 2002 .

[39]  S. W. Angrist.  Direct energy conversion , 1976 .

[40]  J. Strnad,et al.  A thermoelectric experiment in support of the second law , 1988 .

[41]  D. Infield,et al.  Design optimization of thermoelectric devices for solar power generation , 1998 .

[42]  S. K. Tyagi,et al.  nergy and exergy analyses of thermal power plants : A review , 2011 .

[43]  D. Rowe,et al.  Thermoelectric figure-of-merit under large temperature differences , 2004 .

[44]  An-Bang Wang,et al.  The influence of the Thomson effect on the performance of a thermoelectric cooler , 2005 .

[45]  L. Chen,et al.  Heat transfer surface area optimization for a thermoelectric generator , 2007 .