Infrared thermography for condition monitoring – A review
暂无分享,去创建一个
T. Jayakumar | T. Saravanan | S. Bagavathiappan | John Philip | B. B. Lahiri | B. B. Lahiri | J. Philip | T. Jayakumar | T. Saravanan | S. Bagavathiappan
[1] E. Gauthier,et al. ITER-like wide-angle infrared thermography and visible observation diagnostic using reflective optics , 2007 .
[2] K. S. Hermanson,et al. Corrosion fatigue modeling via differential infrared thermography , 1998 .
[3] B.H. Chudnovsky,et al. Corrosion of Electrical Conductors in Pulp and Paper Industrial Applications , 2007, IEEE Transactions on Industry Applications.
[4] Kiyoshi Itami,et al. Multiplexing thermography for International Thermonuclear Experimental Reactor divertor targets , 2004 .
[5] Hao Wang,et al. Application of thermographic temperature measurements in injection molding and blow molding of plastics , 1996, Defense, Security, and Sensing.
[6] M.K. Sanders,et al. National Fire Protection Association 70B Recommended Practice for Electrical Equipment Maintenance 2006 Edition , 2007, 2007 IEEE/IAS Industrial & Commercial Power Systems Technical Conference.
[7] Jr. James E. Black. Thermal Baseline Factors in Nuclear Power Plants , 1989, Defense, Security, and Sensing.
[8] Ayse Tavukcuoglu,et al. Use of IR thermography for the assessment of surface-water drainage problems in a historical building, Ağzıkarahan (Aksaray), Turkey , 2005 .
[9] Satoshi Shida,et al. Infrared thermography for monitoring surface checking of wood during drying , 2010 .
[10] Michel Pilloz,et al. The infrared thermography control of the laser welding of amorphous polymers , 2008 .
[11] J. Lohan,et al. Experimental validation of numerical heat transfer predictions for singleand multi-component printed circuit boards in natural convection environments , 1999, Fifteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.99CH36306).
[12] Antonia Moropoulou,et al. Emissivity considerations in building thermography , 2003 .
[13] Yves Candau,et al. Improvement of building wall surface temperature measurements by infrared thermography , 2005 .
[14] E. C. Bortoni,et al. Infrared thermography applied for outdoor power substations , 2008, SPIE Defense + Commercial Sensing.
[15] Lan Chung,et al. Infrared Thermographic Technique to Measure Corrosion in Reinforcing Bar , 2006 .
[16] Mark A. Rumsey,et al. Application of Infrared Thermography Nondestructive Testing during Wind Turbine Blade Tests , 2001 .
[17] U. Galietti,et al. Analysis of heat sources accompanying the fatigue of 2024 T3 aluminium alloys , 2007 .
[18] Baldev Raj,et al. Performance parameters for thermal imaging systems , 2003 .
[19] André Chrysochoos,et al. Thermal and dissipative effects accompanying Lüders band propagation , 2001 .
[20] Xavier Maldague,et al. Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .
[21] Jalal Abedi,et al. Quantitative determination of in-plane moisture distribution in paper by infrared thermography , 2001 .
[22] Martin Jönsson,et al. The use of infrared thermography in the corrosion science area , 2010 .
[23] Keith Worden,et al. An introduction to structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[24] Bryan A. Chin,et al. On Line Sensing Of Weld Penetration Using Infrared Thermography , 1986, Other Conferences.
[25] A. Poblete,et al. Thermographic measurement of the effect of humidity in mortar porosity , 2007 .
[26] Carosena Meola. Infrared thermography of masonry structures , 2007 .
[27] Paolo Bison,et al. Mapping corrosion of metallic slab by thermography , 2010 .
[28] K. D. Srivastava,et al. Review of condition assessment of power transformers in service , 2002 .
[29] Rassoul Amirfattahi,et al. Automatic detection of defects on polyethylene pipe welding using thermal infrared imaging , 2011 .
[30] M. Kutin,et al. Tensile features of welded joint testing by thermography , 2010 .
[31] Lai Gui Wang,et al. Infrared Information Testing to the Tensile Necking-Down Phenomena of Metal Specimens , 2011 .
[32] I. O. Clark,et al. Evaluation of infrared thermography as a diagnostic tool in CVD applications , 1998 .
[33] Ermanno G. Grinzato,et al. Monitoring of the Scrovegni Chapel by IR thermography: Giotto at infrared , 2002 .
[34] Michel Grédiac,et al. Applying infrared thermography to study the heating of 2024-T3 aluminium specimens under fatigue loading , 2008 .
[35] C. Doumanidis,et al. Geometry Regulation of Material Deposition in Near-Net Shape Manufacturing by Thermally Scanned Welding , 2002 .
[36] A. G. Imgram,et al. Infrared Thermal Imaging Of Refinery Equipment , 1983, Other Conferences.
[37] B. Venkatraman,et al. Comparative study on the suitability of feature extraction techniques for tungsten inclusion and hotspot detection from weld thermographs for on-line weld monitoring , 2010 .
[38] Michel Grédiac,et al. Applying the grid method and infrared thermography to investigate plastic deformation in aluminium multicrystal , 2011 .
[39] Mayorkinos Papaelias,et al. Condition monitoring of wind turbines: Techniques and methods , 2012 .
[40] Wenchao Zhang,et al. Research on Temperaure Variation of Bridgewire with Infrared Thermal Imaging , 2011 .
[41] A. Gupta,et al. Thermal imaging for detecting thermal interface issues in assembly and reliability stressing , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..
[42] Ermanno G. Grinzato,et al. Monitoring of ancient buildings by the thermal method , 2002 .
[43] J. Lohan,et al. Effect of both PCB thermal conductivity and nature of forced convection environment on component operating temperature: Experimental measurement and numerical prediction , 2000, Sixteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.00CH37068).
[44] Tao Li,et al. Infrared thermography for high-temperature pressure pipe , 2007 .
[45] Dong Pyo Hong,et al. Infrared Thermographic Diagnosis Mechnism for Fault Detection of Ball Bearing under Dynamic Loading Conditions , 2011 .
[46] Bryan A. Chin,et al. A sensing system for weld process control , 1999 .
[47] F. Just-Agosto,et al. Neural network based nondestructive evaluation of sandwich composites , 2008 .
[48] Paolo Pittiglio,et al. The management of mechanical integrity inspections at small-sized "Seveso" facilities , 2009, Reliab. Eng. Syst. Saf..
[49] P. Fito,et al. Control of citrus surface drying by image analysis of infrared thermography , 2004 .
[50] S. J. Marburger,et al. Arc welding penetration control using quantitative feedback theory , 1992 .
[51] R V Williams. Monitoring the condition of machinery , 1976 .
[52] Michal Kolcun. IMPROVING RELIABILITY AND DECREASING LOSSES OF ELECTRICAL SYSTEM WITH INFRARED THERMOGRAPHY , 2008 .
[53] Ronald D. Lucier,et al. Thermography In Commercial Nuclear Power Stations Applications, Limitations, And Realities , 1989, Defense, Security, and Sensing.
[54] Kazunobu Ishii,et al. Correction of Low-altitude Thermal Images applied to estimating Soil Water Status , 2007 .
[55] Yang Cao,et al. Infrared technology in the fault diagnosis of substation equipment , 2008, 2008 China International Conference on Electricity Distribution.
[56] Yongping Yang,et al. Performance monitoring of direct air-cooled power generating unit with infrared thermography , 2011 .
[57] J. H Park,et al. Detection of corrosion steel under an organic coating by infrared photography , 2004 .
[58] David Gleaton. Infrared Thermography at the Savannah River Site , 2004 .
[59] Soib Taib,et al. Recent Progress in Diagnosing the Reliability of Electrical Equipment by Using Infrared Thermography , 2012 .
[60] Antonino Squillace,et al. Non-destructive evaluation of aerospace materials with lock-in thermography , 2006 .
[61] Hiok Chai Quek,et al. Ovarian Cancer Diagnosis with Complementary Learning Fuzzy Neural Network , 2022 .
[62] Minh Phong Luong,et al. Fatigue limit evaluation of metals using an infrared thermographic technique , 1998 .
[63] M. Klein,et al. Localization of wood floor structure by infrared thermography , 2008, SPIE Defense + Commercial Sensing.
[64] Antonino Risitano,et al. Rapid determination of the fatigue curve by the thermographic method , 2002 .
[65] Carosena Meola. Origin and Theory of Infrared Thermography , 2012 .
[66] Shuangwen Sheng,et al. Wind Turbine Drivetrain Condition Monitoring - An Overview , 2011 .
[67] Antonino Squillace,et al. The use of infrared thermography for nondestructive evaluation of joints , 2004 .
[68] Rui Faria,et al. Thermography as a technique for monitoring early age temperatures of hardening concrete , 2011 .
[69] W. L. Chan,et al. Fuzzy logic based automatic diagnosis of power apparatus by infrared imaging , 1993, [1993] Proceedings of the Second International Forum on Applications of Neural Networks to Power Systems.
[70] Jari-Matti Karjanmaa. Thermal imaging and paper-finishing machines , 1993, Defense, Security, and Sensing.
[71] Clemente Ibarra-Castanedo,et al. Inspection of aerospace materials by pulsed thermography, lock-in thermography, and vibrothermography: a comparative study , 2007, SPIE Defense + Commercial Sensing.
[72] José Martínez,et al. EXPERIENCE PERFORMING INFRARED THERMOGRAPHY IN THE MAINTENANCE OF A DISTRIBUTION UTILITY , 2007 .
[73] Charlie R. Brooks,et al. Infrared temperature mapping of ULTIMET alloy during high-cycle fatigue tests , 2000 .
[74] D. Titman. Applications of thermography in non-destructive testing of structures , 2001 .
[75] Li Wang,et al. Thermal Wave Imaging of Aircraft Structures , 1995 .
[76] Go-Long Tsai,et al. Thermal performance measurement of heat sinks with confined impinging jet by infrared thermography , 2005 .
[77] Hazari I. Syed,et al. Quantitative thermal imaging of aircraft structures , 1995, Defense, Security, and Sensing.
[78] Andrew John Willis,et al. Classification of thermally condition-monitored components using statistical and neural network techniques , 1997, Optics & Photonics.
[79] Dajun Chen,et al. Study of the necking phenomenon in fiber drawing by infrared thermography , 2010 .
[80] T. Jayakumar,et al. Medical applications of infrared thermography: A review , 2012, Infrared Physics & Technology.
[81] Alexis Rusinek,et al. Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature , 2011 .
[82] Dong-Pyo Hong,et al. Fault Diagnosis of Ball Bearings within Rotational Machines Using the Infrared Thermography Method , 2010 .
[83] Frank Altmann,et al. Microscopic lock-in thermography investigation of leakage sites in integrated circuits , 2000 .
[84] Antonia Moropoulou,et al. Applications of infrared thermography for the investigation of historic structures , 2004 .
[85] Bryan A. Chin,et al. Infrared Thermography As A Control For The Welding Process , 1986 .
[86] A. Mahrle,et al. Comparison of experimental determined and numerical simulated temperature fields for quality assurance at laser beam welding of steels and aluminium alloyings , 2000 .
[87] Minh-Phong Luong,et al. Introducing infrared thermography in soil dynamics , 2007 .
[88] M. Genest,et al. Processing thermography images for pitting corrosion quantification on small diameter ductile iron pipe , 2012 .
[89] Christian Licht,et al. Thermomechanical couplings and pseudoelasticity of shape memory alloys , 1998 .
[90] Ermanno Grinzato. State of the Art and Perspective of Infrared Thermography Applied to Building Science , 2012 .
[91] B. K. N. Rao. Condition monitoring and the integrity of industrial systems , 1998 .
[92] Reijo Lehtiniemi,et al. Applications of infrared thermography in electronics research , 2000 .
[93] Takahide Sakagami,et al. Applications of pulse heating thermography and lock-in thermography to quantitative nondestructive evaluations , 2002 .
[94] Antonino Risitano,et al. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components , 2000 .
[95] Leehter Yao,et al. Automatic Diagnostic System of Electrical Equipment Using Infrared Thermography , 2009, 2009 International Conference of Soft Computing and Pattern Recognition.
[96] Neil G. Thompson,et al. CORROSION COST AND PREVENTIVE STRATEGIES IN THE UNITED STATES , 2002 .
[97] Soteris A. Kalogirou,et al. Application of infrared thermography for the determination of the overall heat transfer coefficient (U-Value) in building envelopes , 2011 .
[98] Ermanno G. Grinzato,et al. Corrosion evaluation by thermal image processing and 3D modelling , 1998 .
[99] O. Breitenstein,et al. Lock-In IR-Thermography – A Novel Tool for Material and Device Characterization , 2001 .
[100] M. Maj,et al. Thermomechanical coupling in the elastic regime and elasto-plastic transition during tension of austenitic steel, titanium and aluminium alloy at strain rates from 10−4 to 10−1 s−1 , 2012 .
[101] Pierre Dehombreux,et al. Evaluation of the Performance of Infrared Thermography for on-Line Condition Monitoring of Rotating Machines , 2011 .
[102] X. Maldague,et al. A Study of Wood Inspection by Infrared Thermography, Part I: Wood Pole Inspection by Infrared Thermography , 2001 .
[103] Jitendra Malik,et al. Normalized Cuts and Image Segmentation , 2000, IEEE Trans. Pattern Anal. Mach. Intell..
[104] T. Jayakumar,et al. Defect Detection in Weld Joints by Infrared Thermography , 2011 .
[105] Baldev Raj,et al. Thermography for Online Detection of Incomplete Penetration and Penetration Depth Estimation , 2006 .
[106] Nicola Ludwig. Thermographic testing on buildings using a simplified heat transfer model , 2003 .
[107] Michael Forde,et al. Application of infrared thermography to the non-destructive testing of concrete and masonry bridges , 2003 .
[108] Gerald C. Holst,et al. Common Sense Approach to Thermal Imaging , 2000 .
[109] Bo-Young Lee,et al. A study on integrity assessment of the resistance spot weld by Infrared Thermography , 2011 .
[110] S. Marinetti,et al. IR thermographic detection and characterization of hidden corrosion in metals: General analysis , 2010 .
[111] B. Venkatraman,et al. Prediction of tensile failure of 316 stainless steel using infrared thermography , 2004 .
[112] P. Wallace,et al. Pulsed thermography in the investigation of PCBs for defect detection & analysis , 2006 .
[113] Bryan A. Chin,et al. INFRARED THERMOGRAPHY FOR SENSING THE ARC WELDING PROCESS , 1983 .
[114] V. P. Vavilov,et al. Detecting corrosion in steel products by dynamic infrared thermography , 1995 .
[115] Michel Grédiac,et al. Applying infrared thermography to analyse martensitic microstructures in a Cu–Al–Be shape-memory alloy subjected to a cyclic loading , 2011 .
[116] Oral Büyüköztürk. Imaging of concrete structures , 1998 .
[117] Matthew Fairlie,et al. On-Line Temperature Measurement In Hot Rolling Of Aluminum Using Infrared Imaging Systems , 1989, Defense, Security, and Sensing.
[118] Vladimir Pašagić,et al. Infrared Thermography in Marine Applications , 2008 .
[119] F. Escourbiac,et al. Infrared thermography inspection of the ITER vertical target qualification prototypes manufactured by European industry using SATIR , 2009 .
[120] S. Boudrahem,et al. The dynamics of Portevin–Le Chatelier bands in an Al–Mg alloy from infrared thermography , 2008 .
[121] C. Stelletta,et al. The use of thermography on the slaughter-line for the assessment of pork and raw ham quality , 2007 .
[122] Ermanno G. Grinzato,et al. Hidden corrosion detection in thick metallic components by transient IR thermography , 2007 .
[123] Baldev Raj,et al. Condition monitoring of exhaust system blowers using infrared thermography , 2008 .
[124] Mihael Junkar,et al. Method for online quality monitoring of AWJ cutting by infrared thermography , 2010 .
[125] Dajun Chen,et al. Study on the thermal effects of rubbers during loading–unloading cycles by infrared thermography , 2012, Polymer Bulletin.
[126] Jorge R. Henríquez,et al. Infrared thermography applied for high-level current density identification over planar microwave circuit sectors , 2010 .
[127] Ralf Arndt,et al. Influence of concrete properties on the detection of voids with impulse-thermography , 2007 .
[128] Xavier Maldague,et al. Defect characterization in pulsed thermography: a statistical method compared with Kohonen and Perceptron neural networks , 2000 .
[129] R. A. Epperly,et al. A tool for reliability and safety: predict and prevent equipment failures with thermography , 1997, Record of Conference Papers. IEEE Industry Applications Society 44th Annual Petroleum and Chemical Industry Conference.
[130] Ingrid Bouwer Utne,et al. A structured approach to improved condition monitoring , 2012 .
[131] S. G. Lee,et al. Inspection of the Leakage for the Closure Plug of Heavy Water Reactor using Infrared Thermography in Nuclear On-site Application , 2010 .
[132] Shutao Zhao,et al. HV Power Equipment Diagnosis Based on Infrared Imaging Analyzing , 2006, 2006 International Conference on Power System Technology.
[133] Herbert Wiggenhauser,et al. Transient thermography for structural investigation of concrete and composites in the near surface region , 2002 .
[134] Thomas Ummenhofer,et al. On the use of infrared thermography for the analysis of fatigue damage processes in welded joints , 2009 .
[135] Vladimir Platonovich Vavilov,et al. Infrared thermographic inspection of operating smokestacks , 2002 .
[136] Sony Baby,et al. Thermographic studies on IMI-834 titanium alloy during tensile loading , 2008 .
[137] Thomas Schmidt,et al. Production integrated NDT by means of automated thermography , 2012 .
[138] Michael M. Khonsari,et al. Dissipated thermal energy and damage evolution of Glass/Epoxy using infrared thermography and acoustic emission , 2012 .
[139] Baldev Raj,et al. Characterisation of adhesively bonded laminates using radiography and infrared thermal imaging techniques , 2006 .
[140] André Chrysochoos,et al. Deformation and dissipated energies for high cycle fatigue of 2024-T3 aluminium alloy , 2009 .
[141] B. Grabas,et al. Observation of penetration with infrared thermography in laser welding , 1994 .
[142] Giovanni Maria Carlomagno,et al. Impact damage in GFRP: New insights with infrared thermography , 2010 .
[143] E. F. J. Ring,et al. The historical development of temperature measurement in medicine , 2007 .
[144] Baldev Raj,et al. Correlation of infrared thermographic patterns and acoustic emission signals with tensile deformation and fracture processes , 2001 .
[145] Giovanni Maria Carlomagno,et al. REVIEW ARICLE: Recent advances in the use of infrared thermography , 2004 .
[146] Krishnan Balasubramaniam,et al. Automatic defect identification using thermal image analysis for online weld quality monitoring , 2012 .
[147] Baldev Raj,et al. Quantification of defects in composites and rubber materials using active thermography , 2012 .
[148] Michael J. Ralph. Power Plant Thermography-Wide Range of Applications , 2004 .
[149] Baldev Raj,et al. Development of In-service Inspection techniques for nuclear power plants in India , 1997 .
[150] Bryan A. Chin,et al. Infrared sensing techniques for penetration depth control of the submerged arc welding process , 2001 .
[151] H. A. Gaberson. Rotating machinery energy loss due to misalignment , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.
[152] G. A. Georgiou,et al. A review of NDT techniques for wind turbines , 2007 .
[153] L. Bertling,et al. Estimation of disconnector contact condition for modelling the effect of maintenance and ageing , 2005, 2005 IEEE Russia Power Tech.
[154] Constantinos A. Balaras,et al. Infrared thermography for building diagnostics , 2002 .
[155] Roberto Rinaldi. Infrared Devices: Short History and New Trends , 2012 .
[156] Amin Al-Habaibeh,et al. Comprehensive experimental evaluation of a systematic approach for cost effective and rapid design of condition monitoring systems using Taguchi’s method , 2002 .
[157] Jesus Mirapeix,et al. Application of infrared thermography to the fabrication process of nuclear fuel containers , 2005 .
[158] Fabrice Pierron,et al. Heat dissipation measurements in low stress cyclic loading of metallic materials: From internal friction to micro-plasticity , 2009 .
[159] Hartmuth Schröttner,et al. Non‐destructive detection of corrosion applied to steel and galvanized steel coated with organic paints by the pulsed phase thermography , 2012 .
[160] Thierry Palin-Luc,et al. Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography , 2005 .
[161] Ralf Arndt,et al. Square pulse thermography in frequency domain as adaptation of pulsed phase thermography for qualitative and quantitative applications in cultural heritage and civil engineering , 2010 .
[162] Dias Haralambopoulos,et al. Assessing the thermal insulation of old buildings—The need for in situ spot measurements of thermal resistance and planar infrared thermography , 1998 .
[163] Xavier Maldague,et al. Infrared Image Processing for Online Quality Control in Laser Welding , 2010 .
[164] Elektro Ljubljana. THE ANALYSIS OF THERMOGRAPHIC REPORTS WITH EMPHASIS ON EMISSIVITY COEFFICIENT DETERMINATION OF BARE CONDUCTORS AND JOINTS , 2007 .
[165] Colm P. O'Donnell,et al. Applications of thermal imaging in food quality and safety assessment , 2010 .
[166] P. N. S. Rao,et al. Correlation between Plantar Foot Temperature and Diabetic Neuropathy: A Case Study by Using an Infrared Thermal Imaging Technique , 2010, Journal of diabetes science and technology.
[167] S. D. Probert,et al. Reducing the cost of preventive maintenance (PM) through adopting a proactive reliability-focused culture , 2006 .
[168] W. K. Nowacki,et al. Temperature evolution in deformed shape memory alloy , 2002 .
[169] E. Barreira,et al. Evaluation of building materials using infrared thermography , 2007 .
[170] Antonino Squillace,et al. Non-destructive control of industrial materials by means of lock-in thermography , 2002 .
[171] Roberto Montanini,et al. Quantitative determination of subsurface defects in a reference specimen made of Plexiglas by means of lock-in and pulse phase infrared thermography , 2010 .
[172] X. Jordà,et al. Irradiance-based emissivity correction in infrared thermography for electronic applications. , 2011, The Review of scientific instruments.
[173] Mark A. Rumsey,et al. Non-Destructive Evaluation of Wind Turbine Blades Using an Infrared Camera , 1998 .
[174] Claude Fressengeas,et al. Crossover from continuous to discontinuous propagation in the Portevin–Le Chatelier effect , 2010 .
[175] Pekka Pakarinen,et al. Infrared thermography for examination of paper structure , 1998, Defense, Security, and Sensing.
[176] Reimondas Sliteris,et al. The review of non-destructive testing techniques suitable for inspection of the wind turbine blades , 2008 .
[177] J. Frate,et al. Evaluation of overhead line and joint performance with high-definition thermography , 2000, 2000 IEEE ESMO - 2000 IEEE 9th International Conference on Transmission and Distribution Construction, Operation and Live-Line Maintenance Proceedings. ESMO 2000 Proceedings. Global ESMO 2000. The Pow.
[178] M. Fidali. An idea of continuous thermographic monitoring of machinery , 2008 .
[179] P. Verboven,et al. Thermographic surface quality evaluation of apple , 2006 .
[180] Eetta Saarimäki,et al. An investigation of non-destructive thermographic inspection exploiting phase transition of water for moisture detection in aircraft structures , 2008 .
[181] J. S. Edmonds,et al. In-service winding failure of newly installed replacement stator , 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).
[182] D. Wagner,et al. Some aspects of Portevin–Le Chatelier plastic instabilities investigated by infrared pyrometry , 2005 .
[183] Charalabos C. Doumanidis,et al. SIMULTANEOUS IN-PROCESS CONTROL OF HEAT-AFFECTED ZONE AND COOLING RATE DURING ARC WELDING , 1990 .
[184] Antonio Pizzi,et al. Parameters of wood welding: A study with infrared thermography , 2006 .
[185] Erwin De Baetselier,et al. Active thermography application for solder thickness measurement in surface mounted device technology , 1998 .
[186] A. Durocher,et al. Health monitoring of Tore-Supra Toroidal Pump Limiter using Lock-in thermography , 2009 .