Assessment of Crystallinity Development during Fused Filament Fabrication through Fast Scanning Chip Calorimetry

[1]  M. Pyda,et al.  The Flash DSC 1, a power compensation twin-type, chip-based fast scanning calorimeter (FSC): First findings on polymers , 2011 .

[2]  C. Schick,et al.  Structure formation of polyamide 6 from the glassy state by fast scanning chip calorimetry , 2011 .

[3]  L. Pires,et al.  Crystallization kinetics of PCL and PCL–glass composites for additive manufacturing , 2018, Journal of Thermal Analysis and Calorimetry.

[4]  Piotr Wolszczak,et al.  Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing , 2018, Macromolecular Materials and Engineering.

[5]  D. Gardner,et al.  Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM) , 2017 .

[6]  D. Rosen,et al.  Effects of material properties on warpage in fused deposition modeling parts , 2018 .

[7]  Clemens Holzer,et al.  Shrinkage and Warpage Optimization of Expanded‐Perlite‐Filled Polypropylene Composites in Extrusion‐Based Additive Manufacturing , 2017 .

[8]  P. Bártolo,et al.  Process-Driven Microstructure Control in Melt-Extrusion-Based 3D Printing for Tailorable Mechanical Properties in a Polycaprolactone Filament , 2018, Macromolecular Materials and Engineering.

[9]  Shoufeng Yang,et al.  Extrusion-based additive manufacturing of PEEK for biomedical applications , 2015 .

[10]  K. Migler,et al.  Weld formation during material extrusion additive manufacturing. , 2017, Soft matter.

[11]  Richard P. Wool,et al.  A theory of healing at a polymer-polymer interface , 1983 .

[12]  Chee How Wong,et al.  Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring , 2018 .

[13]  Gary P. Halada,et al.  Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure , 2017 .

[14]  Brian N. Turner,et al.  A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness , 2015 .

[15]  Dominik Rietzel,et al.  Suitability of PLA/TCP for fused deposition modeling , 2012 .

[16]  Pj Piet Lemstra,et al.  Welding behavior of semicrystalline polymers. 2. Effect of cocrystallization on autoadhesion , 2000 .

[17]  R. Pitchumani,et al.  Healing of Thermoplastic Polymers at an Interface under Nonisothermal Conditions , 2002 .

[18]  Abdul Manaf Abdullah,et al.  Preparation and characterization of a newly developed polyamide composite utilising an affordable 3D printer , 2015 .

[19]  P. Wolszczak,et al.  Heat distribution in material during fused deposition modelling , 2018 .

[20]  D. Karalekas,et al.  In-situ monitoring of strain and temperature distributions during fused deposition modeling process , 2016 .

[21]  Huadong Yang,et al.  Numerical simulation of temperature field and stress field in fused deposition modeling , 2018, Journal of Mechanical Science and Technology.

[22]  C. Schick,et al.  Insights into polymer crystallization and melting from fast scanning chip calorimetry , 2016 .

[23]  Qian Sun,et al.  Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process , 2004 .

[24]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[25]  Lonnie J. Love,et al.  Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites , 2017 .

[26]  M. Misra,et al.  Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid) , 2018, ACS omega.

[27]  M. Mackay.  The importance of rheological behavior in the additive manufacturing technique material extrusion , 2018, Journal of Rheology.

[28]  David Kazmer,et al.  Healing simulation for bond strength prediction of FDM , 2017 .

[29]  G. Rizvi,et al.  Effect of processing conditions on the bonding quality of FDM polymer filaments , 2008 .

[30]  Jie Zhang,et al.  Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling , 2017 .

[31]  J. Harings,et al.  Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides , 2018 .

[32]  B. Goderis,et al.  Random Copolymers from Polyamide 11 and Polyamide 12 by Reactive Extrusion: Synthesis, Eutectic Phase Behavior, and Polymorphism , 2016 .

[33]  F. J. Hybart,et al.  Rates of crystallization of copolyamides. II. Random copolymers of nylons 66 and 6 , 1969 .

[34]  F. M. Duarte,et al.  Estimation of filament temperature and adhesion development in fused deposition techniques , 2017 .

[35]  Bryan D. Vogt,et al.  Complex flow and temperature history during melt extrusion in material extrusion additive manufacturing , 2018, Additive Manufacturing.

[36]  P. J. Lemstra,et al.  Welding Behavior of Semicrystalline Polymers. 1. The Effect of Nonequilibrium Chain Conformations on Autoadhesion of UHMWPE , 1998 .

[37]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[38]  Richard S. Graham,et al.  Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts , 2018, Additive Manufacturing.

[39]  Dichen Li,et al.  Controllable interlayer shear strength and crystallinity of PEEK components by laser-assisted material extrusion , 2018 .

[40]  K. Migler,et al.  Effect of processing conditions on crystallization kinetics during materials extrusion additive manufacturing. , 2018, Polymer.

[41]  Akhil Garg,et al.  Performance evaluation of warping characteristic of fused deposition modelling process , 2017 .

[42]  K. Migler,et al.  Infrared thermography of welding zones produced by polymer extrusion additive manufacturing. , 2016, Additive manufacturing.

[43]  Gang Wang,et al.  Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography , 2017 .

[44]  R. Mülhaupt,et al.  Polymers for 3D Printing and Customized Additive Manufacturing , 2017, Chemical reviews.

[45]  P. Olmsted,et al.  Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing , 2017, 1703.09295.

[46]  Giuseppe Titomanlio,et al.  Analysis of Shrinkage Development of a Semicrystalline Polymer during Injection Molding , 2010 .

[47]  David W. Rosen,et al.  Fast scanning calorimetry for semicrystalline polymers in fused deposition modeling , 2019, Polymer.