Mechanical and Thermal Characterization of Jute Fabric-Reinforced Polypropylene Composites: Effect of Maleic Anhydride

ABSTRACT The growing interest in eco-friendly materials motivates the use of natural fibers in composites. This study investigated the influence of jute fabric layer reinforcement on the mechanical and thermal properties of polypropylene (PP) modified with 20% and 30% weight contents of maleic anhydride (MAPP). Results showed improved mechanical properties, especially for the composite with 2 layer jute fabrics and 30% of MAPP, which had an increase of about 100% in tensile and 45% in flexural strength. This composite also presented advantageous thermal properties for processing. Statistical analyses of mechanical properties revealed a significant interaction between jute and MAPP, leading to improved fiber/matrix adhesion.

[1]  T. Madera-Santana,et al.  Surface modification and performance of jute fibers as reinforcement on polymer matrix: an overview , 2019 .

[2]  R. Qiu,et al.  Properties of natural fiber-reinforced biobased thermoset biocomposites: Effects of fiber type and resin composition , 2019, Composites Part B: Engineering.

[3]  Mubarak A. Khan,et al.  Effect of Fiber Loading on the Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites , 2019 .

[4]  M. Hasan,et al.  Natural Fiber and Synthetic Fiber Composites: Comparison of Properties, Performance, Cost and Environmental Benefits , 2019 .

[5]  N. Yilmaz,et al.  Flexural behavior of textile-reinforced polymer composites , 2019, Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites.

[6]  Mubarak A. Khan,et al.  Effect of Fiber Loading on the Dynamic Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites , 2018 .

[7]  Shorab Jain,et al.  Characterization and thermal kinetic analysis of pineapple leaf fibers and their reinforcement in epoxy , 2018, Journal of Elastomers & Plastics.

[8]  Nasrin Akter,et al.  Effect of Bitumen and Polyester Resin Mixture on the Physico-Mechanical and Degradable Properties of Jute Fabrics , 2018, Fibers.

[9]  Marius Majewsky,et al.  Determination of microplastic polyethylene (PE) and polypropylene (PP) in environmental samples using thermal analysis (TGA-DSC). , 2016, The Science of the total environment.

[10]  K. Satyanarayana,et al.  Effect of domestic compatabilizer on the performance of polypropylene-sawdust composites , 2016 .

[11]  R. Xiao,et al.  Role of β-O-4 glycosidic bond on thermal degradation of cellulose , 2016 .

[12]  K. Pickering,et al.  A review of recent developments in natural fibre composites and their mechanical performance , 2016 .

[13]  Y. Karaduman,et al.  Effect of stacking sequence on mechanical properties of hybrid flax/jute fibers reinforced thermoplastic composites , 2015 .

[14]  A. Błędzki,et al.  Polypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibers , 2015 .

[15]  J. Khan,et al.  Mechanical, thermal and degradation characteristics of jute fabric-reinforced polypropylene composites: Effect of potassium dichromate as oxidizing agent , 2014, Fibers and Polymers.

[16]  R. A. D. Oliveira.  Comportamentos, térmico e mecânico, de compósitos de polipropileno e resíduo da hidrólise enzimática do bagaço de cana de açúcar , 2014 .

[17]  D. Das,et al.  Role of Reactive Dye and Chemicals on Mechanical Properties of Jute Fabrics Polypropylene Composites , 2014 .

[18]  S. Iannace,et al.  Flexural and impact response of woven glass fiber fabric/polypropylene composites , 2013 .

[19]  M. Skrifvars,et al.  Thermal, calorimetric and crystallisation behaviour of polypropylene/jute yarn bio-composites fabricated by commingling technique , 2013 .

[20]  J. Khan,et al.  Effect of mercerization on mechanical, thermal and degradation characteristics of jute fabric-reinforced polypropylene composites , 2012, Fibers and Polymers.

[21]  A. Błędzki,et al.  Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .

[22]  K. Dey,et al.  Comparative Studies of Mechanical and Interfacial Properties between Jute and Bamboo Fiber-Reinforced Polypropylene-Based Composites , 2012 .

[23]  Raquel Santos Mauler,et al.  Avaliação das propriedades de compósitos de polipropileno reforçados com casca de aveia , 2012 .

[24]  T. Islam,et al.  Fabrication and Mechanical Characterization of Jute Fabrics: Reinforced Polyvinyl Chloride/Polypropylene Hybrid Composites , 2011 .

[25]  Valdir Soldi,et al.  Influência da sequência de mistura do PP-MA nas propriedades dos compósitos de PP e fibra de bananeira , 2011 .

[26]  M. Reboredo,et al.  Lignin in jute fabric–polypropylene composites , 2009 .

[27]  Y. S. Negi,et al.  Recent Development in Natural Fiber Reinforced Polypropylene Composites , 2009 .

[28]  M. Islam,et al.  Improvement of physico-mechanical properties of jute fiber reinforced polypropylene composites by post-treatment , 2008 .

[29]  H. Toghiani,et al.  Preliminary study of the stiffness enhancement of wood–plastic composites using carbon nanofibers , 2008, Holz als Roh- und Werkstoff.

[30]  X. Xu,et al.  Life cycle assessment of wood-fibre-reinforced polypropylene composites , 2008 .

[31]  N. Kim,et al.  Mechanical properties of silanized jute–polypropylene composites , 2008 .

[32]  H. Hamada,et al.  A novel processing technique for thermoplastic manufacturing of unidirectional composites reinforced with jute yarns , 2006 .

[33]  N. Chand,et al.  Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites , 2006 .

[34]  E. Mäder,et al.  Jute/polypropylene composites I. Effect of matrix modification , 2006 .

[35]  Smita Mohanty,et al.  Effect of MAPP as a Coupling Agent on the Performance of Jute–PP Composites , 2004 .

[36]  Muhammad Pervaiz,et al.  Carbon storage potential in natural fiber composites , 2003 .

[37]  A. Rana,et al.  Short jute fiber reinforced polypropylene composites: effect of compatibiliser, impact modifier and fiber loading , 2003 .

[38]  M. R. Islam,et al.  Improvement of physico-mechanical properties of jute yarn by photografting with 3-(trimethoxysilyl) propylmethacrylate , 2003 .

[39]  R. Rowell,et al.  Short jute fiber‐reinforced polypropylene composites: Effect of compatibilizer , 1998 .

[40]  J. Youngquist,et al.  Injection molding of polypropylene reinforced with short jute fibers , 1996 .

[41]  H. Mark,et al.  Principles of Plasticization , 1965 .