@Scale: Insights from a large, long-lived appliance energy WSN

We present insights obtained from conducting a year-long, 455 meter deployment of wireless plug-load electric meters in a large commercial building. We develop a stratified sampling methodology for surveying the energy use of Miscellaneous Electric Loads (MELs) in commercial buildings, and apply it to our study building. Over the deployment period, we collected over nine hundred million individual readings. Among our findings, we document the need for a dynamic, scalable IPv6 routing protocol which supports point-to-point routing and multiple points of egress. Although the meters are static physically, we find that the set of links they use is dynamic; not using such a dynamic set results in paths that are twice as long. Finally, we conduct a detailed survey of the accuracy possible with inexpensive AC metering hardware. Based on a 21-point automated calibration of a population of 500 devices, we find that it is possible to produce nearly utility-grade metering data.

[1]  Carsten Bormann,et al.  The Constrained Application Protocol (CoAP) , 2014, RFC.

[2]  Philip Levis,et al.  RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks , 2012, RFC.

[3]  Kamin Whitehouse,et al.  The hitchhiker's guide to successful residential sensing deployments , 2011, SenSys.

[4]  Tsvetko Tsvetkov.  RPL: IPv6 Routing Protocol for LOW Power and Lossy Networks , 2011 .

[5]  Stephen Dawson-Haggerty,et al.  Hydro: A Hybrid Routing Protocol for Low-Power and Lossy Networks , 2010, 2010 First IEEE International Conference on Smart Grid Communications.

[6]  Mani B. Srivastava,et al.  A case against routing-integrated time synchronization , 2010, SenSys '10.

[7]  Jerald Martocci,et al.  Building Automation Routing Requirements in Low-Power and Lossy Networks , 2010, RFC.

[8]  David E. Culler,et al.  Multichannel reliability assessment in real world WSNs , 2010, IPSN '10.

[9]  Stephen Dawson-Haggerty,et al.  Design, Implementation, and Evaluation of an Embedded IPv6 Stack , 2010 .

[10]  Philip Levis,et al.  Identifying Energy Waste through Dense Power Sensing and Utilization Monitoring , 2010 .

[11]  Andreas Terzis,et al.  RACNet: a high-fidelity data center sensing network , 2009, SenSys '09.

[12]  Shaojie Tang,et al.  Canopy closure estimates with GreenOrbs: sustainable sensing in the forest , 2009, SenSys '09.

[13]  Philip Levis,et al.  The case for a network protocol isolation layer , 2009, SenSys '09.

[14]  David E. Culler,et al.  Experiences with a high-fidelity wireless building energy auditing network , 2009, SenSys '09.

[15]  Paramvir Bahl,et al.  Somniloquy: Augmenting Network Interfaces to Reduce PC Energy Usage , 2009, NSDI.

[16]  Junda Liu,et al.  Skilled in the Art of Being Idle: Reducing Energy Waste in Networked Systems , 2009, NSDI.

[17]  David E. Culler,et al.  Design and implementation of a high-fidelity AC metering network , 2009, 2009 International Conference on Information Processing in Sensor Networks.

[18]  Amy L. Murphy,et al.  Monitoring heritage buildings with wireless sensor networks: The Torre Aquila deployment , 2009, 2009 International Conference on Information Processing in Sensor Networks.

[19]  Cheng Huang,et al.  Queen: Estimating Packet Loss Rate between Arbitrary Internet Hosts , 2009, PAM.

[20]  Philip Levis,et al.  The β-factor: measuring wireless link burstiness , 2008, SenSys '08.

[21]  François Ingelrest,et al.  The hitchhiker's guide to successful wireless sensor network deployments , 2008, SenSys '08.

[22]  Peter I. Corke,et al.  The Design and Evaluation of a Mobile Sensor/Actuator Network for Autonomous Animal Control , 2007, 2007 6th International Symposium on Information Processing in Sensor Networks.

[23]  Matt Welsh,et al.  Fidelity and yield in a volcano monitoring sensor network , 2006, OSDI '06.

[24]  Philip Levis,et al.  Understanding the causes of packet delivery success and failure in dense wireless sensor networks , 2006, SenSys '06.

[25]  Bruce Nordman,et al.  Electronics Come of Age: A Taxonomy for Miscellaneous and Low Power Products , 2006 .

[26]  Koen Langendoen,et al.  Murphy loves potatoes: experiences from a pilot sensor network deployment in precision agriculture , 2006, Proceedings 20th IEEE International Parallel & Distributed Processing Symposium.

[27]  S. Kim,et al.  Trio: enabling sustainable and scalable outdoor wireless sensor network deployments , 2006, 2006 5th International Conference on Information Processing in Sensor Networks.

[28]  Wei Hong,et al.  A macroscope in the redwoods , 2005, SenSys '05.

[29]  J. Heidemann,et al.  Experimental Analysis of Concurrent Packet Transmissions in Low-Power Wireless Networks , 2005 .

[30]  Vinayak S. Naik,et al.  A line in the sand: a wireless sensor network for target detection, classification, and tracking , 2004, Comput. Networks.

[31]  Gyula Simon,et al.  The flooding time synchronization protocol , 2004, SenSys '04.

[32]  David E. Culler,et al.  The dynamic behavior of a data dissemination protocol for network programming at scale , 2004, SenSys '04.

[33]  Ramesh Govindan,et al.  Understanding packet delivery performance in dense wireless sensor networks , 2003, SenSys '03.

[34]  Jean-Chrysostome Bolot,et al.  End-to-end packet delay and loss behavior in the internet , 1993, SIGCOMM '93.