Efficacy of HfN as sintering aid in the manufacture of ultrahigh-temperature metal diborides-matrix ceramics

HfB_2 and (ZrB_2 + HfB_2)-based ceramics containing 19.5 vol% SiC particulate were developed from commercially available powders by hot-pressing. With the assistance of 3 vol% HfN as sintering aid, after hot-pressing at 1900 °C and 50 MPa of applied pressure, full density in both the composites was successfully achieved. The materials revealed a homogeneous microstructure, characterized by faceted diboride grains (2 μm average size) and SiC particles regularly dispersed. Limited levels of secondary phases were found. The thermomechanical properties of the composites were promising: about 22 GPa microhardness and 500 GPa Young’s modulus for both. The HfB_2-SiC composite showed values of strength of 650 ± 50 and 465 ± 40 MPa at 25 and 1500 °C, respectively. Likewise, the (ZrB_2-HfB_2)-SiC composite exhibited values of strength of 765 ± 20 and 250 ± 45 MPa at 25 and 1500 °C, respectively. The excellent response at high temperature in air was attributed to the refractoriness of the phases constituting the composites and to the resistance to oxidation enhanced by the presence of the SiC particulate.

[1]  Guo‐Jun Zhang,et al.  Reactive Hot Pressing of ZrB2–SiC Composites , 2004 .

[2]  Donald T. Ellerby,et al.  High‐Strength Zirconium Diboride‐Based Ceramics , 2004 .

[3]  Alida Bellosi,et al.  Microstructure and Properties of an HfB2‐SiC Composite for Ultra High Temperature Applications , 2004 .

[4]  Alida Bellosi,et al.  Oxidation of ZrB2-Based Ceramics in Dry Air , 2003 .

[5]  A. Bellosi,et al.  Advances in microstructure and mechanical properties of zirconium diboride based ceramics , 2003 .

[6]  S. Mishra,et al.  Microstructure evolution during sintering of self-propagating high-temperature synthesis produced ZrB_2 powder , 2002 .

[7]  Hyoun‐Ee Kim,et al.  Sintering and mechanical properties of titanium diboride with aluminum nitride as a sintering aid , 2002 .

[8]  J. Yang,et al.  Thermal stability of refractory carbide/boride composites , 2002 .

[9]  Alida Bellosi,et al.  Processing and properties of zirconium diboride-based composites , 2002 .

[10]  Alida Bellosi,et al.  Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride , 2002 .

[11]  R. Telle,et al.  Solid State Reactions in Transition Metal Diboride-Based Materials , 2001 .

[12]  T. Koch,et al.  Hardness and elastic properties of Ti(CxN1-x), Zr(CxN1-x) and Hf(CxN1-x) , 2000 .

[13]  Mark M. Opeka,et al.  Mechanical, Thermal, and Oxidation Properties of Refractory Hafnium and zirconium Compounds , 1999 .

[14]  J. Quinn,et al.  Indentation brittleness of ceramics: a fresh approach , 1997 .

[15]  David J. Green,et al.  Elastic properties and microcracking behavior of particulate titanium diboride-silicon carbide composites , 1997 .

[16]  김종희,et al.  철계 액상을 통한 붕화지르코늄의 소결 , 1996 .

[17]  S. Torizuka,et al.  Effect of SiC on Interfacial Reaction and Sintering Mechanism of TiB2 , 1995 .

[18]  P. Ettmayer,et al.  Solid state properties of group IVb carbonitrides , 1995 .

[19]  H. Pastor Titanium-carbonitride-based hard alloys for cutting tools , 1988 .

[20]  P. Becher,et al.  Effect of oxygen contamination on densification of TiB2 , 1987 .

[21]  Brian R. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I , 1981 .

[22]  H. C. Graham,et al.  The High‐Temperature Oxidation Behavior of a HfB2 + 20 v / o SiC Composite , 1975 .

[23]  M. De Handbuch der Physik , 1957 .

[24]  Jonathan A. Salem,et al.  Evaluation of ultra-high temperature ceramics foraeropropulsion use , 2002 .

[25]  王皓,et al.  Mechanical properties and microstructure of TiB2 ceramic influenced by ZrB2 additive , 2002 .

[26]  †. J.J.Meléndez-Martínez,et al.  Characterisation and high temperature mechanical properties of zirconium boride-based materials , 2002 .

[27]  Salvatore Torquato,et al.  Modeling of physical properties of composite materials , 2000 .

[28]  Theodore J. Reinhart,et al.  Engineered materials handbook , 1987 .

[29]  Vlado I. Matkovich,et al.  Boron and Refractory Borides , 1977 .

[30]  D. Kalish,et al.  Strength, Fracture Mode, and Thermal Stress Resistance of HfB2 and ZrB2 , 1969 .