Sulfonated poly(ether ether ketone)-based composite membrane for polymer electrolyte membrane fuel cells

Abstract The solid proton conductor zirconium phosphate sulfophenylenphosphonate of composition Zr(HPO4)0.65(SPP)1.35 where SPP denotes metasulfophenylenphosphonate was prepared in the amorphous gel form in dimethyl formamide (DMF) and characterized by 31P NMR. The composite membranes of SPEEK up to 50 wt.% of zirconium phosphate sulfophenylenphosphonate content were prepared by introducing the solid proton conductor from the gel. The composite membranes were characterized using FT-IR, powder X-ray diffraction, SEM, DSC/TGA. The proton conductivity of the membranes was measured under 100% relative humidity up to 70 °C. The composite membranes had better thermal stability when compared with that of SPEEK. A three-fold increase in proton conductivity at 70 °C was observed for the composite membrane with 50 wt.% of solid proton conductor. Furthermore, the conductivity results imply that a critical percentage of proton conductor is needed to establish conduction pathways in the polymer matrix.

[1]  Changpeng Liu,et al.  Preparation and characterization of sulfonated poly(ether ether ketone ketone) proton exchange membranes for fuel cell application , 2005 .

[2]  Se Young Oh,et al.  Synthesis and characterization of sulfonated polyimide membranes for direct methanol fuel cell , 2003 .

[3]  Zhang Gaowen,et al.  Organic/inorganic composite membranes for application in DMFC , 2005 .

[4]  G. Alberti,et al.  Layered metalIV phosphonates, a large class of inorgano-organic proton conductors , 1997 .

[5]  M. Gallazzi,et al.  Organosulphur phosphorus acid compounds. Part 1. m-Sulphophenylphosphonic acid , 1989 .

[6]  Michael D. Guiver,et al.  Properties of SPEEK based PEMs for fuel cell application , 2003 .

[7]  Osamu Kobayashi,et al.  Mass production cost of PEM fuel cell by learning curve , 2004 .

[8]  N. Dando,et al.  Synthesis and structural studies of layered aluminum phenylphosphonate , 1997 .

[9]  Michael D. Guiver,et al.  Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications , 2000 .

[10]  S. Ferroni,et al.  Preparation, characterization and proton conductivity of titanium phosphate sulfophenylphosphonate , 2001 .

[11]  Ryuichiro Goto,et al.  Field performance of a polymer electrolyte fuel cell for a residential energy system , 2005 .

[12]  Jesse S. Wainright,et al.  Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells , 2004 .

[13]  G. Alberti,et al.  Preparation and proton conductivity of composite ionomeric membranes obtained from gels of amorphous zirconium phosphate sulfophenylenphosphonates in organic solvents , 2004 .

[14]  Deborah J. Jones,et al.  Hybrid organic-inorganic membranes for a medium temperature fuel cell , 2000 .

[15]  G. Alberti.  Inorgano-organic proton conducting membranes for fuel cells and sensors at medium temperatures , 2000 .

[16]  S. Kaliaguine,et al.  Sulfonated polyether ether ketone based composite polymer electrolyte membranes , 2001 .

[17]  Matthias Wessling,et al.  Cation permeable membranes from blends of sulfonated poly(ether ether ketone) and poly(ether sulfone) , 2002 .

[18]  P. Jannasch,et al.  Polysulfone ionomers for proton-conducting fuel cell membranes - 2. Sulfophenylated polysulfones and polyphenylsulfones , 2005 .