A Microfluidic Chip Using Phenol Formaldehyde Resin for Uniform-Sized Polycaprolactone and Chitosan Microparticle Generation

This study develops a new solvent-compatible microfluidic chip based on phenol formaldehyde resin (PFR). In addition to its solvent-resistant characteristics, this microfluidic platform also features easy fabrication, organization, decomposition for cleaning, and reusability compared with conventional chips. Both solvent-dependent (e.g., polycaprolactone) and nonsolvent-dependent (e.g., chitosan) microparticles were successfully prepared. The size of emulsion droplets could be easily adjusted by tuning the flow rates of the dispersed/continuous phases. After evaporation, polycaprolactone microparticles ranging from 29.3 to 62.7 μm and chitosan microparticles ranging from 215.5 to 566.3 μm were obtained with a 10% relative standard deviation in size. The proposed PFR microfluidic platform has the advantages of active control of the particle size with a narrow size distribution as well as a simple and low cost process with a high throughput.

[1]  Patricia Krawczak,et al.  Thermosetting (bio)materials derived from renewable resources: A critical review , 2010 .

[2]  S. Quake,et al.  Solvent-Resistant Photocurable “Liquid Teflon” for Microfluidic Device Fabrication , 2004 .

[3]  G. Whitesides,et al.  Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices. , 2003, Analytical chemistry.

[4]  S. Quake,et al.  From micro- to nanofabrication with soft materials. , 2000, Science.

[5]  M. Shoichet,et al.  Creating permissive microenvironments for stem cell transplantation into the central nervous system. , 2012, Trends in biotechnology.

[6]  Zulfiqur Ali,et al.  Development of a simple and low cost microbioreactor for high-throughput bioprocessing , 2009, Biotechnology Letters.

[7]  Katharina Bruno.  Using drug-excipient interactions for siRNA delivery☆ , 2011, Advanced Drug Delivery Reviews.

[8]  John A. Izard,et al.  Prediction of drop volumes in liquid–liquid systems , 1972 .

[9]  José Alberto Fracassi da Silva,et al.  Toner and paper‐based fabrication techniques for microfluidic applications , 2010, Electrophoresis.

[10]  Keng-Shiang Huang,et al.  Microfluidic‐assisted synthesis of hemispherical and discoidal chitosan microparticles at an oil/water interface , 2012, Electrophoresis.

[11]  Yu-Che Huang,et al.  Microfluidic emulsification and sorting assisted preparation of monodisperse chitosan microparticles. , 2009, Lab on a chip.

[12]  S. Nair,et al.  Biomaterials based on chitin and chitosan in wound dressing applications. , 2011, Biotechnology advances.

[13]  T. Kissel,et al.  Pulmonary gene delivery using polymeric nonviral vectors. , 2012, Bioconjugate chemistry.

[14]  David J. Rowe,et al.  Microfluidic device for compositional analysis of solvent systems at microwave frequencies , 2012 .

[15]  B. J. Meister,et al.  Drop formation at low velocities in liquid‐liquid systems: Part I. Prediction of drop volume , 1968 .

[16]  Shuhong Yu,et al.  Phenol formaldehyde resin nanoparticles loaded with CdTe quantum dots: a fluorescence resonance energy transfer probe for optical visual detection of copper(II) ions. , 2011, ACS nano.

[17]  J. Ouellette.  A New Wave of Microfluidic Devices by , 2022 .

[18]  Fang Fang,et al.  A glass microfluidic chip for continuous blood cell sorting by a magnetic gradient without labeling , 2008, Analytical and bioanalytical chemistry.

[19]  R. Cingolani,et al.  Ultraviolet-based bonding for perfluoropolyether low aspect-ratio microchannels and hybrid devices. , 2008, Lab on a chip.

[20]  Yung-Sheng Lin,et al.  An Aluminum Microfluidic Chip Fabrication Using a Convenient Micromilling Process for Fluorescent Poly(dl-lactide-co-glycolide) Microparticle Generation , 2012, Sensors.

[21]  G. Mul,et al.  Micromolding of solvent resistant microfluidic devices. , 2011, Lab on a chip.

[22]  David A Barrow,et al.  Liquid-liquid phase separation: characterisation of a novel device capable of separating particle carrying multiphase flows. , 2009, Lab on a chip.

[23]  D. Hutmacher,et al.  The return of a forgotten polymer : Polycaprolactone in the 21st century , 2009 .

[24]  S. Quake,et al.  Solvent-resistant photocurable liquid fluoropolymers for microfluidic device fabrication [corrected]. , 2004, Journal of the American Chemical Society.

[25]  C. Tzeng,et al.  Microfluidic assisted synthesis of multi-functional polycaprolactone microcapsules: incorporation of CdTe quantum dots, Fe3O4 superparamagnetic nanoparticles and tamoxifen anticancer drugs. , 2009, Lab on a chip.

[26]  Che-Hsin Lin,et al.  Microfluidic controlling monodisperse microdroplet for 5-fluorouracil loaded genipin-gelatin microcapsules. , 2009, Journal of controlled release : official journal of the Controlled Release Society.

[27]  Chih-Hui Yang,et al.  Synthesis of agar microparticles using temperature‐controlled microfluidic devices for Cordyceps militaris cultivation , 2011, Electrophoresis.

[28]  Xiaoguang Zhang,et al.  Dynamics of drop formation in viscous flows , 1999 .

[29]  Eun Kyu Lee,et al.  Applicability of laser-induced Raman microscopy forin situ monitoring of imine formation in a glass microfluidic chip , 2003 .

[30]  Byeong Kwon Ju,et al.  Fabrication of round channels using the surface tension of PDMS and its application to a 3D serpentine mixer , 2007 .

[31]  Ming-Ying Hsu,et al.  In situ synthesis of twin monodispersed alginate microparticles , 2011 .

[32]  Yi-Yao Hsu,et al.  Microfluidic synthesis of tail‐shaped alginate microparticles using slow sedimentation , 2013, Electrophoresis.

[33]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[34]  H. Becker,et al.  Polymer microfluidic devices. , 2002, Talanta.

[35]  J. M. Meseguer Dueñas,et al.  Physical characterization of polycaprolactone scaffolds , 2008, Journal of materials science. Materials in medicine.

[36]  Zhao-Lun Fang,et al.  Bonding of glass microfluidic chips at room temperatures. , 2004, Analytical chemistry.

[37]  Chih-Yu Wang,et al.  Electrostatic droplets assisted synthesis of alginate microcapsules , 2011, Drug Delivery and Translational Research.

[38]  A. H. Wang,et al.  Facile Synthesis of Radial-Like Macroporous Superparamagnetic Chitosan Spheres with In-Situ Co-Precipitation and Gelation of Ferro-Gels , 2012, PloS one.

[39]  S. Hartland,et al.  CORRELATION FOR DROP SIZE IN LIQUID/LIQUID SPRAY COLUMNS , 1984 .