Mechanical and acoustic emission characteristics of rock: Effect of loading and unloading confining pressure at the postpeak stage

Abstract The disturbance caused by excavation to surrounding rock structures during underground mining under complex geological conditions at great depth induces rock failure due to the effect of stress concentration and unloading. Therefore, the design, construction and maintenance of structures (i.e., pillars, drifts, chambers) are based not only on peak strength, but also on postpeak behavior and, subsequently, residual strength of rocks. Therefore, better understanding the characteristic features of rock at the postpeak stage is of paramount importance for underground construction and ground support design activities. Argillaceous limestone specimens loaded to the residual phase in the conventional triaxial compression test under different initial confining pressures were continuously loaded by loading and unloading cycles. Analysis of the variation characteristics of stress and strain were complemented with acoustic emission (AE) monitoring for investigating the effects of the confining pressure and the loading and unloading cycles on the mechanical properties of the rock in the residual phase. Besides, the yielding premonition information about the rock in the loading confining pressure stage was analyzed and calculated. The results show that because the deformation during the axial loading mainly comes from the sliding between the fracture planes, the bearing capacity is related to not only the confining pressure, but also the unloading path; the elastic modulus in the axial elastic deformation stage is larger than the corresponding elastic modulus of the prepeak stage, and the axial deformation presents good feature of elastic–plastic deformation; the bearing capacity of rock in the residual phase was provided by the frictional sliding between the elastic rock block under confining pressure. The precursor information about the rock yielding to plastic deformation in the loading confining pressure test of the failure rock could be confirmed based on the evolution characteristics of the AE amplitude.

[1]  Dwayne D. Tannant,et al.  Evolution of cohesion and friction angle during microfracture accumulation in rock , 2015, Natural Hazards.

[2]  R. Wan,et al.  Strength and post-peak response of Colorado shale at high pressure and temperature , 2016 .

[3]  K. Seshagiri Rao,et al.  Post failure behaviour of a rock mass under the influence of triaxial and true triaxial confinement , 2006 .

[4]  Leandro R. Alejano,et al.  Dilation in granite during servo-controlled triaxial strength tests , 2013 .

[5]  Brijes Mishra,et al.  Experimental investigation of the effect of change in control modes on the post-failure behavior of coal and coal measures rock , 2013 .

[6]  Yao-Chung Chen,et al.  Investigation of Hydraulic Fracture Propagation Using a Post-Peak Control System Coupled with Acoustic Emission , 2015, Rock Mechanics and Rock Engineering.

[7]  Weihong Peng,et al.  Monitoring Rock Failure Processes Using the Hilbert–Huang Transform of Acoustic Emission Signals , 2016, Rock Mechanics and Rock Engineering.

[8]  Hiroshi Morioka,et al.  Back-analysis of rock mass strength parameters using AE monitoring data , 2007 .

[9]  Emmanuelle Klein,et al.  Compaction localization in porous sandstones: spatial evolution of damage and acoustic emission activity , 2004 .

[10]  P. K. Kaiser,et al.  Determination of residual strength parameters of jointed rock masses using the GSI system , 2007 .

[11]  Cheng Zhai,et al.  The effect of pulse frequency on the fracture extension during hydraulic fracturing , 2014 .

[12]  I. F. Öge,et al.  Relationship Between Pre-failure and Post-failure Mechanical Properties of Rock Material of Different Origin , 2014, Rock Mechanics and Rock Engineering.

[13]  Shanyong Wang,et al.  Experimental Investigation on the Strength, Deformability, Failure Behavior and Acoustic Emission Locations of Red Sandstone Under Triaxial Compression , 2012, Rock Mechanics and Rock Engineering.

[14]  L. Gang,et al.  Acoustic emission characteristics and stress release rate of coal samples in different dynamic destruction time , 2016 .

[15]  L. Han,et al.  Mechanical and damage evolution properties of sandstone under triaxial compression , 2016 .

[16]  M. He,et al.  Rock burst process of limestone and its acoustic emission characteristics under true-triaxial unloading conditions , 2010 .

[17]  Pengfei Shan,et al.  Structure instability forecasting and analysis of giant rock pillars in steeply dipping thick coal seams , 2015, International Journal of Minerals, Metallurgy, and Materials.

[18]  S. Pradhan,et al.  Stress-Induced Fracturing of Reservoir Rocks: Acoustic Monitoring and μCT Image Analysis , 2015, Rock Mechanics and Rock Engineering.

[19]  Hr Hardy,et al.  Acoustic Emission Monitoring and Analysis Procedures Utilized During Deformation Studies on Geologic Materials , 1991 .

[20]  Gérard Ballivy,et al.  Evaluating damage during shear tests of rock joints using acoustic emissions , 2010 .

[21]  Leandro R. Alejano,et al.  Strength and dilation of jointed granite specimens in servo-controlled triaxial tests , 2014 .

[22]  Mark S. Diederichs,et al.  A Laboratory-Testing-Based Study on the Strength, Deformability, and Dilatancy of Carbonate Rocks at Low Confinement , 2015, Rock Mechanics and Rock Engineering.

[23]  Marc Boulon,et al.  Experimental Study of Mechanical Behaviour of Rock Joints Under Cyclic Loading , 2004 .

[24]  P. Rivard,et al.  Shear mechanism of rock joints under pre-peak cyclic loading condition , 2016 .

[25]  Xinglin Lei,et al.  Detailed analysis of acoustic emission activity during catastrophic fracture of faults in rock , 2004 .

[26]  Shaojun Li,et al.  Experimental study on the prediction of rockburst hazards induced by dynamic structural plane shearing in deeply buried hard rock tunnels , 2016 .

[27]  H. P. Kang,et al.  Effects of pre-existing discontinuities on the residual strength of rock mass – Insight from a discrete element method simulation , 2016 .

[28]  E. Hoek,et al.  Empirical estimation of rock mass modulus , 2006 .

[29]  Hideki Shimada,et al.  Role of Acoustic Emission for Solving Rock Engineering Problems in Indonesian Underground Mining , 2011 .

[30]  X. Zhao,et al.  Objective Determination of Crack Initiation Stress of Brittle Rocks Under Compression Using AE Measurement , 2015, Rock Mechanics and Rock Engineering.

[31]  John A. Hudson,et al.  Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression , 1999 .

[32]  Ming Cai,et al.  Influence of Unloading Rate on the Strainburst Characteristics of Beishan Granite Under True-Triaxial Unloading Conditions , 2014, Rock Mechanics and Rock Engineering.