论文信息 - High-Efficiency NOx and PM Exhaust Emission Control for Heavy-Duty On-Highway Diesel Engines

High-Efficiency NOx and PM Exhaust Emission Control for Heavy-Duty On-Highway Diesel Engines

A diesel exhaust emission control system consisting of catalyzed diesel particulate filters and NOx adsorber catalysts arranged in a dual-path configuration was developed and evaluated using a 1999-specification 5.9 liter medium-heavy-duty diesel engine. NOx adsorber regeneration was accomplished via a secondary exhaust fuel injection system. An alternating restriction of the exhaust flow between the two flow paths allowed injection and adsorber regeneration to occur under very low space velocity conditions. NOx and PM reductions in excess of 90% were observed over a broad range of steady-state operating conditions and over the hot-start HDDE-FTP transient cycle.

[1] Naoto Miyoshi,et al. Development of New Concept Three-Way Catalyst for Automotive Lean-Burn Engines , 1995 .

[2] J. A. A. Tillaart,et al. Improved SCR Systems for Heavy Duty Applications , 2000 .

[3] Guy Richard Chandler,et al. An Integrated SCR and Continuously Regenerating Trap System to Meet Future NOx and PM Legislation , 2000 .

[4] William P. Partridge,et al. Resolving Emissions Dynamics via Mass Spectrometry: Time Resolved Measurements of Emission Transients by Mass Spectrometry , 2000 .

[5] Jacques Lemaire,et al. Achieving Heavy-Duty Diesel NOx/PM Levels Below the EPA 2002 Standards--An Integrated Solution , 2000 .

[6] Thomas Kreuzer,et al. New Developments in Lean NOx Catalysis for Gasoline Fueled Passenger Cars in Europe , 1996 .

[7] Andrew Peter Walker,et al. Evaluation of NOx Storage Catalysts as an Effective System for NOx Removal from the Exhaust Gas of Leanburn Gasoline Engines , 1995 .

[8] INVESTIGATION OF NOX ADSORBER CATALYST DEACTIVATION , 1998 .

[9] Mark Brogan,et al. Recent Progress in NOx Trap Technology , 1998 .

[10] Possible Exhaust Gas Aftertreatment Concepts for Passenger Car Diesel Engines with Sulphur-free Fuel , 1999 .