Synthesis and Characterization of Aa2024-Sio2 Nanocomposites Through the Vortex Method

[1]  B. Niroumand,et al.  The role of accumulative roll bonding after stir casting process to fabricate high-strength and nanostructured AA2024-(SiO2+TiO2) hybrid nanocomposite , 2020 .

[2]  O. Ertugrul,et al.  Effect of Al2O3 Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites , 2020, International Journal of Metalcasting.

[3]  M. Prokić,et al.  Ceramic Sonotrodes for Light Alloy Melt Treatment , 2020, International Journal of Metalcasting.

[4]  A. du Plessis,et al.  Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights , 2020 .

[5]  P. Rohatgi,et al.  50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities , 2019, International Journal of Metalcasting.

[6]  E. Han,et al.  Effects of Al2O3 on the microstructures and corrosion behavior of low-pressure cold gas sprayed Al 2024-Al2O3 composite coatings on AA 2024-T3 substrate , 2019, Surface and Coatings Technology.

[7]  Xiangfa Liu,et al.  High-temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture , 2019, Materials Science and Engineering: A.

[8]  B. Niroumand,et al.  Synthesis of AA2024-(SiO2np+TiO2np) hybrid nanocomposite via stir casting process , 2019, Materials Science and Engineering: A.

[9]  M. Sutaria,et al.  Development and Characterization of In Situ AlSi5Cu3/TiB2 Composites , 2019, International Journal of Metalcasting.

[10]  H. Yavuz,et al.  The Use of Stirring Methods for the Production of SiC-Reinforced Aluminum Matrix Composite and Validation Via Simulation Studies , 2018, International Journal of Metalcasting.

[11]  A. Phillion,et al.  The influence of nanoparticles on dendritic grain growth in Mg alloys , 2018, Acta Materialia.

[12]  M. Azadi,et al.  Effects of SiO2 nano-particles on tribological and mechanical properties of aluminum matrix composites by different dispersion methods , 2018 .

[13]  B. Eghbali,et al.  Microstructural characterization and mechanical properties of TiB 2 reinforced Al6061 matrix composites produced using stir casting process , 2018 .

[14]  B. Niroumand,et al.  A review on aluminothermic reaction of Al/ZnO system , 2018 .

[15]  Bruce B. Frey,et al.  The Sage encyclopedia of educational research, measurement, and evaluation , 2018 .

[16]  H. Nie,et al.  Effect of SiC nanoparticles addition on the microstructures and mechanical properties of ECAPed Mg9Al–1Si alloy , 2017 .

[17]  J. Enrique,et al.  PARTICULATE REINFORCED ALUMINUM ALLOY MATRIX COMPOSITES - A REVIEW ON THE EFFECT OF MICROCONSTITUENTS , 2017 .

[18]  Jun Du,et al.  Thermal analysis of in-situ Al2O3/SiO2(p)/Al composites fabricated by stir casting process , 2016 .

[19]  L. Ceschini,et al.  Influence of Friction Stir Processing on the Microstructure and Mechanical Properties of a compocast AA2024-Al2O3 nanocomposite , 2016 .

[20]  M. Ketabchi,et al.  Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding , 2016, Metallurgical and Materials Transactions A.

[21]  P. Rohatgi,et al.  In-situ reactions in hybrid aluminum alloy composites during incorporating silica sand in aluminum alloy melts , 2016 .

[22]  B. Niroumand,et al.  A novel and facile method for silica nanoparticles synthesis from high temperature vulcanization (HTV) silicon , 2016 .

[23]  Kyu C. Cho,et al.  Tensile properties of reactive stir-mixed and squeeze cast Al/CuOnp-based metal matrix nanocomposites , 2014 .

[24]  Pradeep K. Rohatgi,et al.  Functional Metal Matrix Composites: Self-lubricating, Self-healing, and Nanocomposites-An Outlook , 2014, JOM.

[25]  M. Vedani,et al.  Metal Matrix Composites Reinforced by Nano-Particles—A Review , 2014 .

[26]  Yizhong Huang,et al.  Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting , 2014 .

[27]  S. Das,et al.  Comparison of Mechanical Properties and Microstructure of Aluminum alloy Micron and Nano SiC Composites fabricated by Ultrasonic Vibration , 2014 .

[28]  P. Withers.  Metal matrix composite , 2014 .

[29]  P. Stratton.  Ellingham diagrams – their use and misuse , 2013 .

[30]  B. Niroumand,et al.  Synthesis of A356–MWCNT nanocomposites through a novel two stage casting process , 2013 .

[31]  K. Borodianskiy,et al.  Improvement of the Mechanical Properties of Al-Si Alloys by TiC Nanoparticles , 2013, Metallurgical and Materials Transactions A.

[32]  Hong-Gyu Choi.  Scale-up Ultrasonic Processing System for Batch Production of Metallic Nanocomposites , 2013 .

[33]  Hong-Gyu Choi.  Semi-Solid Mixing for Fabrication of A206/Al2O3 Master Nanocomposites , 2013 .

[34]  Hong-Gyu Choi.  Composition Optimization for A206/Al 2 O 3 Nanocomposite , 2013 .

[35]  Z. Fan,et al.  Oxidation of Aluminium Alloy Melts and Inoculation by Oxide Particles , 2012, Transactions of the Indian Institute of Metals.

[36]  B. Niroumand,et al.  Production of Al-Si-SiCp cast composites by injection of low-energy ball-milled Al-SiCp powder into the melt , 2012, Metals and Materials International.

[37]  B. Niroumand,et al.  Microstructure and Mechanical Properties of Al356/SiCp Cast Composites Fabricated by a Novel Technique , 2012, Journal of Materials Engineering and Performance.

[38]  A. Sanaty-Zadeh.  Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect , 2012 .

[39]  B. Niroumand,et al.  Effects of reinforcement distribution on low and high temperature tensile properties of Al356/SiCp cast composites produced by a novel reinforcement dispersion technique , 2011 .

[40]  M. R. Toroghinejad,et al.  Fabrication and characterization of Al/SiCp composites by CAR process , 2011 .

[41]  B. Niroumand,et al.  Development of Al356/SiCp cast composites by injection of SiCp containing composite powders , 2011 .

[42]  M. R. Toroghinejad,et al.  Refinement of microstructure and improvement of mechanical properties of Al/Al2O3 cast composite by accumulative roll bonding process , 2011 .

[43]  M. R. Toroghinejad,et al.  Effect of particle size on microstructure and mechanical properties of composites produced by ARB process , 2011 .

[44]  B. Niroumand,et al.  Compocasting of A356-CNT composite , 2010 .

[45]  B. Niroumand,et al.  Synthesis and characterization of 356-SiCp composites by stir casting and compocasting methods , 2010 .

[46]  B. Niroumand,et al.  Mechanism of zinc oxide–aluminum aluminothermic reaction , 2010 .

[47]  Pradeep K. Rohatgi,et al.  Tribological performance of A206 aluminum alloy containing silica sand particles , 2010 .

[48]  B. Niroumand,et al.  Compocasting of A 356-CNT composite , 2010 .

[49]  B. Niroumand,et al.  Synthesis of In-situ Aluminum Matrix Composite Using a New Activated Powder Injection Method , 2008 .

[50]  B. Niroumand,et al.  Compocasting of an Al-Si-SiCp Composite Using Powder Injection Method , 2008 .

[51]  K. Das,et al.  Abrasive wear of zircon sand and alumina reinforced Al–4.5 wt%Cu alloy matrix composites – A comparative study , 2007 .

[52]  Karl Ulrich Kainer,et al.  Metal matrix composites : custom-made materials for automotive and aerospace engineering , 2006 .

[53]  M. Kok,et al.  Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites , 2005 .

[54]  Zhao-hui Wang,et al.  Study of Grain Refinement and SiC Nanoparticle Reinforced Magnesium Alloys , 2005 .

[55]  Tsu-Wei Chou,et al.  Nanocomposites in context , 2005 .

[56]  E. Atik,et al.  The effect of precipitation-hardening conditions on wear behaviours at 2024 aluminium wrought alloy , 2003 .

[57]  Ho-In Lee,et al.  The interfacial characterization of oxidized SiC(p)/2014 Al composites , 2001 .

[58]  Z. Fan,et al.  Review Durability of materials in molten aluminum alloys , 2001 .

[59]  T. Eto,et al.  New aspect of development of high strength aluminum alloys for aerospace applications , 2000 .

[60]  M. Yan.  Durability of materials in molten aluminum alloys , 2000 .

[61]  Shusen Wu,et al.  Nucleation Effect of Alumina in Al-Si/Al2O3 Composites , 1999 .

[62]  L. Geng,et al.  Evaluation of the microstructure of in-situ reaction processed Al3Ti-Al2O3-Al composite , 1997 .

[63]  K. Sohn,et al.  Effect of applied pressure on mechanical properties of squeeze cast mg matrix composites , 1995, Metals and Materials.

[64]  S. Ray,et al.  Synthesis of cast metal matrix particulate composites , 1993, Journal of Materials Science.

[65]  Pradeep K. Rohatgi,et al.  Metal Matrix Composites , 2020, Composite Materials.

[66]  H. Fukunaga,et al.  Preparation of intermetallic compound matrix composites by reaction squeeze casting , 1991 .

[67]  Joseph R. Davis.  Properties and selection : nonferrous alloys and special-purpose materials , 1990 .

[68]  A. Sato,et al.  Aluminum matrix composites: Fabrication and properties , 1976 .