Modeling inductive radio frequency coupling in powerful negative hydrogen ion sources: optimizing the RF coupling

In the fusion experiment ITER powerful neutral beam injection (NBI) systems will be used. The NBI's core component is a negative hydrogen ion source, which is based on a modular concept. Eight cylindrical drivers, each having a volume of several liters, are attached to one common expansion and extraction region. Within the drivers an inductively coupled plasma is sustained by an external cylindrical coil at filling pressures not larger than 0.3 Pa. Radio frequency (RF) generators operating at a driving frequency of 1 MHz feed the coils via a matching network with powers of up to 100 kW per driver. These high powers entail high voltages, which make the ion source prone to electrical breakdowns and arcing, wherefore its reliability is reduced. Moreover, at the ITER prototype RF ion source not more than 60% of the power is absorbed by the plasma, whereas the rest is lost for heating the RF coil and conducting structures of the driver. To optimize the power coupling in the prototype source, a previously validated self-consistent fluid-electromagnetic model is applied. The optimization studies reveal a complex interplay between network losses (mainly caused by the skin effect and eddy currents), and nonlinear plasma phenomena, such as the RF Lorentz force. The model demonstrates promising optimization concepts for the RF coupling in future NBI ion sources. In particular, by increasing the axial driver length and the driving frequency it is possible to enhance the fraction of absorbed power to values around 90%.

[1]  E. Gaio,et al.  Investigation of RF driver equivalent impedance in the inductively coupled SPIDER ion source , 2022, Plasma Physics and Controlled Fusion.

[2]  T. Franke,et al.  Status and future development of Heating and Current Drive for the EU DEMO , 2022, Fusion Engineering and Design.

[3]  S. Lishev,et al.  Modeling inductive radio frequency coupling in powerful negative hydrogen ion sources: validating a self-consistent fluid model , 2022, Plasma Sources Science and Technology.

[4]  D. Zielke,et al.  Diagnostics of RF coupling in H- ion sources as a tool for optimizing source design and operational parameters. , 2022, The Review of scientific instruments.

[5]  Zengshan Li,et al.  A method to evaluate the plasma equivalent resistance of fusion relevant RF ion sources , 2021, Fusion Engineering and Design.

[6]  V. Toigo,et al.  On the road to ITER NBIs: SPIDER improvement after first operation and MITICA construction progress , 2021, Fusion Engineering and Design.

[7]  D. Zielke,et al.  RF power transfer efficiency and plasma parameters of low pressure high power ICPs , 2021 .

[8]  B. Heinemann,et al.  Technology developments for a beam source of an NNBI system for DEMO , 2018, Fusion Engineering and Design.

[9]  Elena Gaio,et al.  Evaluation of power transfer efficiency for a high power inductively coupled radio-frequency hydrogen ion source , 2018 .

[10]  B. Heinemann,et al.  Towards powerful negative ion beams at the test facility ELISE for the ITER and DEMO NBI systems , 2017 .

[11]  R. S. Hemsworth,et al.  Overview of the design of the ITER heating neutral beam injectors , 2017 .

[12]  B. Heinemann,et al.  Towards large and powerful radio frequency driven negative ion sources for fusion , 2017 .

[13]  G. Fubiani,et al.  Model of an inductively coupled negative ion source: I. General model description , 2011 .

[14]  A. Froese,et al.  Nonlinear skin effect in a collisionless plasma , 2009 .

[15]  R. S. Hemsworth,et al.  Gas flow and related beam losses in the ITER neutral beam injector , 2006 .