In-Process Measurement for the Process Control of the Real-Time Manufacturing of Tapered Roller Bearings

Tapered roller bearings can accommodate high radial loads as well as high axial loads. The manufacturing process consists of machining processes for ring and component assembly. In this contribution, the parameters of influence on the measurement procedure were studied. These parameters of influence were classified as environmental, process, and machine parameters. The main objective of this work was to optimize the process using real-time measurements, which required the study of the influence of several parameters on the measurement uncertainty and how to correct their effects.

[1]  M. Shiraishi,et al.  Scope of in-process measurement, monitoring and control techniques in machining processes—Part 3: In-process techniques for cutting processes and machine tools , 1989 .

[2]  Yu Peng,et al.  An Intelligent Process Planning Method Based on Feature-based History Machining Data for Aircraft Structural Parts , 2016 .

[3]  Rajesh Kumar,et al.  Outer race defect width measurement in taper roller bearing using discrete wavelet transform of vibration signal , 2013 .

[4]  Guolei Zheng,et al.  Identification and looping tool path generation for removing residual areas left by pocket roughing , 2016 .

[5]  Tullio Tolio,et al.  Design and management of manufacturing systems for production quality , 2014 .

[6]  Nariaki Nishino,et al.  Adaptive automation and human factors in manufacturing: An experimental assessment for a cognitive approach , 2018 .

[7]  A. Weckenmann,et al.  Probing Systems in Dimensional Metrology , 2004 .

[8]  Clemens Elster,et al.  Efficient implementation of a Monte Carlo method for uncertainty evaluation in dynamic measurements , 2012 .

[9]  Abdelilah Jalid,et al.  Comparison of the GUM and Monte Carlo methods on the flatness uncertainty estimation in coordinate measuring machine , 2016 .

[10]  Tae Bong Eom,et al.  An interferometric Abbe-type comparator for the calibration of internal and external diameter standards , 2010 .

[11]  Yimin Shao,et al.  Dynamic simulation for a tapered roller bearing considering a localized surface fault on the rib of the inner race , 2017 .

[12]  J. J. Aguilar,et al.  Geometrical Verification based on a Laser Triangulation System in Industrial Environment. Effect of the Image Noise in the Measurement Results , 2015 .

[13]  A 2-Port, Space-Saving, Maintenance-Friendly Pneumatic Probe for Velocity Measurements , 2018 .

[14]  Gilles Roy,et al.  The Influence of the Regulator Diameter and Injection Nozzle Geometry on the Flow Structure in Pneumatic Dimensional Control Systems , 1997 .

[15]  Idriss El-Thalji,et al.  A summary of fault modelling and predictive health monitoring of rolling element bearings , 2015 .

[16]  Jan Valíček,et al.  Study on cone roller bearing surface roughness improvement and the effect of surface roughness on tapered roller bearing service life , 2016 .

[17]  Thomas Scanlon,et al.  Requirements for first-time-right response in advanced manufacturing , 2018, 2018 29th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC).

[18]  Hans Kurt Tönshoff,et al.  Process Monitoring in Grinding , 2002 .

[19]  Imre Kocsis,et al.  Optimal Wavelet Selection for the Size Estimation of Manufacturing Defects of Tapered Roller Bearings with Vibration Measurement using Shannon Entropy Criteria , 2017 .

[20]  Shunian Yang,et al.  Research on on-line automatic diagnostic technology for scratch defect of rolling element bearings , 2012 .

[21]  S. Standard.  GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT , 2006 .

[22]  Harald Bosse,et al.  A new comparator for measurement of diameter and form of cylinders, spheres and cubes under clean-room conditions , 1997 .

[23]  Ming Chen,et al.  Tool path strategy and cutting process monitoring in intelligent machining , 2018 .

[24]  J.R.R. Mayer,et al.  Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior , 2018, Precision Engineering.