Optimal design of added viscoelastic dampers and supporting braces

This paper presents a simultaneous optimization procedure for both viscoelastic dampers (VEDs) and supporting braces installed in a structure. The effect of supporting braces on the control efficiency of VEDs is also investigated. To apply a general gradient-based optimization algorithm, closed-form expressions for the gradients of objective function and constraints are derived. Also, the constraint on the dynamic behavior of a structure is embedded in the gradient computation procedure to reduce the number of variables in the optimization. From numerical analysis of an example structure, it was found that when sufficient stiffness cannot be provided for the supporting braces, the flexibility of the brace should be taken into account in the design of the VED to achieve the desired performance of the structure. It was also observed that, as a result of the proposed optimization process, the size of the supporting brace could be reduced while the additional VED size (to compensate for the loss of the control effect) was insignificant. Copyright © 2003 John Wiley & Sons, Ltd.

[1]  E. Vanmarcke.  Properties of Spectral Moments with Applications to Random Vibration , 1972 .

[2]  Mahendra P. Singh,et al.  Optimal seismic response control with dampers , 2001 .

[3]  Mahendra P. Singh,et al.  Optimal placement of dampers for passive response control , 2002 .

[4]  T. T. Soong,et al.  Seismic response of steel frame structures with added viscoelastic dampers , 1989 .

[5]  A. Kiureghian.  Structural Response to Stationary Excitation , 1980 .

[6]  Masaaki Tsuji,et al.  Optimum viscous dampers for stiffness design of shear buildings , 1996 .

[7]  T. T. Soong,et al.  SEISMIC BEHAVIOR OF STEEL FRAME WITH ADDED VISCOELASTIC DAMPERS , 1996 .

[8]  Izuru Takewaki,et al.  Optimal damper placement for minimum transfer functions , 1997 .

[9]  A. Kiureghian.  A response spectrum method for random vibration analysis of mdf systems , 1981 .

[10]  Anita Shukla,et al.  Optimal Use of Viscoelastic Dampers in Building Frames for Seismic Force , 1999 .

[11]  Andrei M. Reinhorn,et al.  Design of Supplemental Dampers for Control of Structures , 1996 .

[12]  A G Davenport,et al.  NOTE ON THE DISTRIBUTION OF THE LARGEST VALUE OF A RANDOM FUNCTION WITH APPLICATION TO GUST LOADING. , 1964 .

[13]  Izuru Takewaki,et al.  Effects of support stiffnesses on optimal damper placement for a planar building frame , 1998 .

[14]  Kazuhiko Kasai,et al.  COMPARATIVE STUDY OF FRAMES USING VISCOELASTIC AND VISCOUS DAMPERS , 1998 .

[15]  T. T. Soong,et al.  Seismic Design of Viscoelastic Dampers for Structural Applications , 1992 .

[16]  Pei-Yang Lin,et al.  Design of dampers for structures based on optimal control theory , 2000 .