Development of La0.6Sr0.4Co0.2Fe0.8O3−δ cathode with an improved stability via La0.8Sr0.2MnO3-film impregnation

Abstract Uniform, dense and continuous coatings of La0.8Sr0.2MnO3−δ (LSM) have been successfully deposited on dense/porous La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) substrates via a one-step drop-coating process using a water-based solution in order to improve the operating stability of solid oxide fuel cell cathode. The processing conditions were optimized by precise control of the composition of infiltrating solution, including chelating agents (glycine, citric acid and ethylene glycol), surfactants (polyvinyl alcohol (PVA), polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP)) and pH values (5.25, 4.29, 3.01 and 2.09). Ethanol was found to improve the wetting ability of the water-based solution significantly, but unfortunately causing precipitation. The symmetrical and full cells tests demonstrated that both performance and stability of LSCF cathode can be enhanced by surface modification with an optimized LSM film coating, leading to ∼31% reduction in cathodic polarization resistance and ∼45% improvement in power density (without observable degradation) for almost 350 h operation at 750 °C under a constant voltage of 0.7 V.

[1]  Ke-ning Sun,et al.  Ionic conductivity, sintering and thermal expansion behaviors of mixed ion conductor BaZr0.1Ce0.7Y0.1Yb0.1O3−δ prepared by ethylene diamine tetraacetic acid assisted glycine nitrate process , 2011 .

[2]  Meilin Liu,et al.  Preparation and Characterization of (La0.8Sr0.2)0.95MnO3−δ (LSM) Thin Films and LSM/LSCF Interface for Solid Oxide Fuel Cells , 2011 .

[3]  H. Hwang,et al.  Electrochemical performance of LSCF-based composite cathodes for intermediate temperature SOFCs , 2005 .

[4]  W. Sitte,et al.  Long-term stability of the oxygen exchange properties of (La,Sr)1 − z(Co,Fe)O3 − δ in dry and wet atmospheres , 2011 .

[5]  Vicki Chen,et al.  The use of anionic surfactants for reducing fouling of ultrafiltration membranes: their effects and optimization , 1992 .

[6]  S. Jiang,et al.  A review of wet impregnation—An alternative method for the fabrication of high performance and nano-structured electrodes of solid oxide fuel cells , 2006 .

[7]  Nigel P. Brandon,et al.  Electrochemical Characterization of La0.6Sr0.4Co0.2Fe0.8 O 3 Cathodes for Intermediate-Temperature SOFCs , 2004 .

[8]  D. Perednis,et al.  Porosity Control of LSM/YSZ Cathode Coating Deposited by Electrospraying , 2005 .

[9]  Jürgen Fleig,et al.  On the width of the electrochemically active region in mixed conducting solid oxide fuel cell cathodes , 2002 .

[10]  C. Zhang,et al.  Controllable synthesis of ZnO nanocrystals via a surfactant-assisted alcohol thermal process at a low temperature , 2005 .

[11]  S. Jiang,et al.  Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review , 2008 .

[12]  Surfactant-assisted synthesis of Ag nanostructures and their self-assembled films on copper and aluminum substrate , 2011 .

[13]  Wenzhao Li,et al.  Kinetic Study of the Formation of Oxygen Vacancy on Lanthanum Manganite Electrodes , 1998 .

[14]  I. Hung,et al.  Effect of La0.1Sr0.9Co0.5Mn0.5O3−δ protective coating layer on the performance of La0.6Sr0.4Co0.8Fe0.2O3−δ solid oxide fuel cell cathode , 2012 .

[15]  Jian Xin Wang,et al.  Synthesis and properties of (La0.75Sr0.25)0.95MnO3±δ nano-powder prepared via Pechini route , 2009 .

[16]  Chang-jiu Li,et al.  Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3 deposited by suspension plasma spraying , 2010 .

[17]  Ming-Jui Tsai,et al.  High temperature oxidation behavior of interconnect coated with LSCF and LSM for solid oxide fuel cell by screen printing , 2010 .

[18]  Youkun Tao,et al.  Morphology control of Ce0.9Gd0.1O1.95 nanopowder synthesized by sol–gel method using PVP as a surfactant , 2009 .

[19]  Meilin Liu,et al.  Growth and characterization of La0.85Sr0.15MnO3 thin films for fuel cell applications , 2012 .

[20]  D. Perednis,et al.  Microstructural Investigations of Nanostructured La(Sr)MnO3-δ Films Deposited by Electrostatic Spray Deposition , 2004 .

[21]  Lixi Wang,et al.  The effect of pH values on the phase formation and properties of BaFe12O19 prepared by citrate–EDTA complexing method , 2008 .

[22]  Lei Zhang,et al.  Enhancing oxygen surface exchange coefficients of strontium-doped lanthanum manganates with electrolytes , 2012 .

[23]  Ching-Ping Wong,et al.  Controlling the morphology and uniformity of a catalyst-infiltrated cathode for solid oxide fuel cells by tuning wetting property , 2010 .

[24]  Ravi Gupta,et al.  Effects of solvent and chelating agent on synthesis of solid oxide fuel cell perovskite, La0.8Sr0.2CrO3−δ , 2008 .

[25]  Stephen J. Skinner,et al.  Recent advances in Perovskite-type materials for solid oxide fuel cell cathodes , 2001 .

[26]  Markus Antonietti,et al.  Sol−Gel Nanocoating: An Approach to the Preparation of Structured Materials , 2001 .

[27]  M. Engelhard,et al.  Degradation Mechanisms of La – Sr – Co – Fe – O3 SOFC Cathodes , 2006 .

[28]  Meilin Liu,et al.  Enhanced performance of LSCF cathode through surface modification , 2012 .

[29]  P. Hendriksen,et al.  Improved oxidation resistance of ferritic steels with LSM coating for high temperature electrochemical applications , 2012 .

[30]  J. M. Benito,et al.  Ceramic membrane ultrafiltration of anionic and nonionic surfactant solutions , 2005 .

[31]  T. Markus,et al.  Long-term operation of a La0.58Sr0.4Co0.2Fe0.8O3−δ-membrane for oxygen separation , 2010 .

[32]  Meilin Liu,et al.  Enhancement of La0.6Sr0.4Co0.2Fe0.8O3-δ durability and surface electrocatalytic activity by La0.85Sr0.15MnO3±δ investigated using a new test electrode platform , 2011 .

[33]  F. Prinz,et al.  Atomic layer deposition of LSM cathodes for solid oxide fuel cells , 2008 .

[34]  Raymond J. Gorte,et al.  High‐Performance SOFC Cathodes Prepared by Infiltration , 2009 .

[35]  O. Kesler,et al.  Air plasma spray processing and electrochemical characterization of SOFC composite cathodes , 2008 .

[36]  Zongping Shao,et al.  Progress in understanding and development of Ba0.5Sr0.5Co0.8Fe0.2O3−δ-based cathodes for intermediate-temperature solid-oxide fuel cells: A review , 2009 .

[37]  L. Gao,et al.  Influence of pH value on properties of nanocrystalline BaTiO3 powder , 2001 .

[38]  Rupak Das,et al.  Microstructure and electrochemical properties of cathode materials for SOFCs prepared via pulsed laser deposition , 2006 .

[39]  Meilin Liu,et al.  La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cells , 2010 .

[40]  Younan Xia,et al.  Shape-Controlled Synthesis of Gold and Silver Nanoparticles , 2002, Science.

[41]  F. Chen,et al.  Electrochemical characteristics of solid oxide fuel cell cathodes prepared by infiltrating (La,Sr)MnO3 nanoparticles into yttria-stabilized bismuth oxide backbones , 2010 .