The universal motor: A classic machine with evergreen challenges in design and modeling

The universal motor has been used for more than one century in a variety of small rating utilizations, mainly in household appliances, thanks to its features of robustness, cheapness and simplicity of feeding and speed regulation. Nevertheless, even if it can be considered a mature component, both the increasing technological and performance requirements and the need to refine its model for operation analysis and design purposes has leaded to deepen its study till nowadays. In this paper, a comprehensive overview of the different involved aspects will be presented, among which: structures, steady state operation analysis, evaluation of equivalent circuit parameters, models for the calculation of instantaneous quantities and related harmonic distortion, efficiency figures of merit, commutation waveforms and estimation of brush wear, electronic converter feeding topologies, design methods.

[1]  A.S. Zein El Din,et al.  Microcomputer-controlled universal motor , 1996, Proceedings of IEEE International Symposium on Industrial Electronics.

[2]  Huangsheng Xu,et al.  High Performance DC Chopper Speed and Current Control of Universal Motors Using a Microcontroller , 2007, 2007 IEEE Industry Applications Annual Meeting.

[3]  T. Fujii,et al.  Commutation of universal motors , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[4]  A. F. Bakan,et al.  Universal motor speed control with current controlled PWM AC chopper by using a microcontroller , 2000, Proceedings of IEEE International Conference on Industrial Technology 2000 (IEEE Cat. No.00TH8482).

[5]  B. Mecrow,et al.  Design and testing of a universal motor using a soft magnetic composite stator , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[6]  A. Di Gerlando,et al.  Model to Evaluate the Influence of the Winding Data on the Brush Wear in Universal Motors , 2006 .

[7]  A. Di Gerlando,et al.  Modelling and Experimental Analysis of Core Saturation and Losses of Universal Motors , 2002 .

[8]  A. Di Gerlando,et al.  Equivalent circuit for the performance analysis of universal motors , 2004, IEEE Transactions on Energy Conversion.

[9]  M. Poloujadoff,et al.  Contribution to the Study of Commutation in Small Uncompensated Universal Motors , 1978, IEEE Transactions on Power Apparatus and Systems.

[10]  P. Viarouge,et al.  Arc Models for Simulation of Brush Motor Commutations , 2008, IEEE Transactions on Magnetics.

[11]  Toshio Fujii.  Study of Universal Motors with Lag Angle Brushes , 1982, IEEE Power Engineering Review.

[12]  Y. Hashimoto,et al.  Method for analysing the commutation in small universal motors , 1995 .

[13]  Ragnar Holm,et al.  Electric contacts handbook , 1958 .

[14]  G. Schroder,et al.  AC-fed universal motor with open loop speed control and PFC , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[15]  P. Viarouge,et al.  A new structure of universal motor using soft magnetic composites , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[16]  A. Di Gerlando,et al.  Low-Cost Redesign Criteria for the Efficiency Improvement of Universal Motors used in Domestic Appliances , 2004 .

[17]  Kazumi Kurihara,et al.  Commutation analysis of universal motors taking into account brush-to-bar voltage drop , 2009, 2009 International Conference on Electrical Machines and Systems.

[18]  Yuji Akiyama,et al.  Harmonic restraint technique of stator core shape and non uniform air-gaped universal motors for vacuum cleaner , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[19]  Gregor Papa,et al.  Universal motor efficiency improvement using evolutionary optimization , 2003, IEEE Trans. Ind. Electron..

[20]  Z. J. Cendes,et al.  Prediction of performance characteristics of a universal motor using parametric finite element analysis , 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).

[21]  V. K. Tarnow.  Sizing of DC permanent magnet and AC universal motors , 1995, Proceedings:Electrical Electronics Insulation Conference and Electrical Manufacturing & Coil Winding Conference.

[22]  T.J.E. Miller,et al.  Calculation of the armature inductance of the universal AC commutator motor , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[23]  D. Lin,et al.  An analytical model and parameter computation for universal motors , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[24]  R. Perini,et al.  Model of the commutation phenomena in a universal motor , 2006, IEEE Transactions on Energy Conversion.

[25]  K. J. Bradley,et al.  The performance analysis of the single-phase, AC commutator-motor , 1991 .

[26]  T. J. E. Miller,et al.  A brush model for detailed commutation analysis of universal motors , 2012, 2012 XXth International Conference on Electrical Machines.

[27]  R. Holm,et al.  Brush Wear During Commutation , 1966 .