Construction Prototyping, Flight Dynamics Modeling, and Aerodynamic Analysis of Hybrid VTOL Unmanned Aircraft

A challenging issue associated with fixed-wing Unmanned Aerial Vehicles (UAVs) is that these vehicles are often not appropriate for operating effectively in limited airspace. This problem emerges especially in urban environment where the usage of a runway is not possible, and UAVs usually have to fly at a relatively low speed and altitude. The development of a vertical take-off and landing (VTOL) fixed-wing plane is a promising trend which hopefully will solve this issue. This paper presents the design process of an unmanned vertical take-off and landing aircraft including prototyping of the airframe construction and mathematical modeling as well as computational fluid dynamics (CFD) simulations. The designed system is to be a hybrid platform, for which different operating modes correspond to the vertical flight, transition, and spatial flight in the airframe system. The paper discusses an iterative design process of the platform with emphasis on CAD design and aerodynamic analysis for particular flight modes. The operating prototype is presented and future plans for platform improvement are discussed.

[1]  Wilbert G. Aguilar,et al.  Vertical take off and landing with fixed rotor , 2017, 2017 CHILEAN Conference on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON).

[2]  Mahmut Faruk Aksit,et al.  Design and construction of a novel quad tilt-wing UAV , 2012 .

[3]  Kenzo Nonami,et al.  Autonomous Flying Robots , 2010 .

[4]  Roman Czyba,et al.  Concept and realization of unmanned aerial system with different modes of operation , 2014 .

[5]  F. Menter,et al.  Ten Years of Industrial Experience with the SST Turbulence Model , 2003 .

[6]  Jim Euchner.  Design , 2014, Catalysis from A to Z.

[7]  Florian R. Menter,et al.  Transition Modelling for General Purpose CFD Codes , 2006 .

[8]  野波 健蔵,et al.  Autonomous flying robots : unmanned aerial vehicles and micro aerial vehicles , 2010 .

[9]  Jie-Tong Zou,et al.  THE DEVELOPMENT OF TILT-ROTOR UNMANNED AERIAL VEHICLE , 2016 .

[10]  Vincent G. Ambrosia,et al.  Unmanned Aircraft Systems in Remote Sensing and Scientific Research: Classification and Considerations of Use , 2012, Remote. Sens..

[11]  Kimon P. Valavanis,et al.  Advances in Unmanned Aerial Vehicles , 2007 .

[12]  Alex M. Stoll,et al.  A Multifunctional Rotor Concept for Quiet and Efficient VTOL Aircraft , 2013 .

[13]  Gerardo R. Flores-Colunga,et al.  A Nonlinear Control Law for Hover to Level Flight for the Quad Tilt-rotor UAV , 2014 .

[14]  Frank L. Lewis,et al.  Aircraft control and simulation: Dynamics, controls design, and autonomous systems: Third edition , 2015 .

[15]  Ferit Çakıcı,et al.  Design and analysis of a mode-switching micro unmanned aerial vehicle , 2016 .

[16]  Roman Czyba,et al.  Modeling and identification of electric propulsion system for multirotor unmanned aerial vehicle design , 2014, 2014 International Conference on Unmanned Aircraft Systems (ICUAS).

[17]  Pedro David Bravo-Mosquera,et al.  Aerodynamic design analysis of a UAV for superficial research of volcanic environments , 2017 .

[18]  Jianda Han,et al.  Control techniques of tilt rotor unmanned aerial vehicle systems: A review , 2017 .

[19]  Yucel Orkut Aktas,et al.  Rapid Prototyping of a Fixed-Wing VTOL UAV for Design Testing , 2016, J. Intell. Robotic Syst..

[20]  Kimon P. Valavanis,et al.  Aviation History and Unmanned Flight , 2012 .

[21]  Tao Huang,et al.  CFD Study of an Annular-Ducted Fan Lift System for VTOL Aircraft , 2015 .

[22]  Joris De Schutter,et al.  Design and Control of an Unmanned Aerial Vehicle for Autonomous Parcel Delivery with Transition from Vertical Take-off to Forward Flight – VertiKUL, a Quadcopter Tailsitter , 2015 .

[23]  Kyros Yakinthos,et al.  Conceptual design of a Blended Wing Body MALE UAV , 2018 .

[24]  Florian R. Menter,et al.  Correlation-Based Transition Modeling for Unstructured Parallelized Computational Fluid Dynamics Codes , 2009 .

[25]  Roman Czyba,et al.  Development of co-axial Y6-Rotor UAV - design, mathematical modeling, rapid prototyping and experimental validation , 2015, 2015 International Conference on Unmanned Aircraft Systems (ICUAS).

[26]  J. De Schutter,et al.  Influence of propeller configuration on propulsion system efficiency of multi-rotor Unmanned Aerial Vehicles , 2016, 2016 International Conference on Unmanned Aircraft Systems (ICUAS).

[27]  John A. Ekaterinaris,et al.  Design, performance evaluation and optimization of a UAV , 2013 .

[28]  Roman Czyba,et al.  Design and Control of a Single Tilt Tri-Rotor Aerial Vehicle , 2016, J. Intell. Robotic Syst..

[29]  N. A. Razak,et al.  Turbulence Model Selection for Low Reynolds Number Flows , 2016, PloS one.

[30]  Quan Zou,et al.  Dynamic surface control to correct for gyroscopic effect of propellers on quadrotor , 2015, ICIA.

[31]  Razvan Udroiu,et al.  CONCEPTUAL DESIGN OF A VTOL REMOTELY PILOTED AIRCRAFT FOR EMERGENCY MISSIONS , 2016 .

[32]  Fan Zhang,et al.  Attitude control of coaxial tri-rotor UAV based on Linear Extended State Observer , 2014, The 26th Chinese Control and Decision Conference (2014 CCDC).

[33]  Raffaello D'Andrea,et al.  A global controller for flying wing tailsitter vehicles , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[34]  Qamar A. Shams,et al.  Technology Challenges in Small UAV Development , 2005 .

[35]  F. R. Menter,et al.  Transition Modelling for General Purpose CFD Codes , 2006 .

[36]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .