Intensification of Solid–Liquid Suspension Performance in an Elliptical Uncovered Unbaffled Stirred Tank

[1]  Yundong Wang,et al.  Chaotic Mixing Intensification and Flow Field Evolution Mechanism in a Stirred Reactor Using a Dual-Shaft Eccentric Impeller , 2022, Industrial & Engineering Chemistry Research.

[2]  Chunlin Li,et al.  Enhancement of mixing efficiency in mechanical stirring reactors via chaotic stirring techniques: application to the treatment of zinc-containing solid waste , 2021, Chemical Engineering Science.

[3]  Alberto Brucato,et al.  CFD simulations of early- to fully-turbulent conditions in unbaffled and baffled vessels stirred by a Rushton turbine , 2021, Chemical Engineering Research and Design.

[4]  Jie Jin,et al.  The effect of baffle on flow structures and dynamics stirred by pitch blade turbine , 2021 .

[5]  C. Hewitt,et al.  Design and development of a new ambr250® bioreactor vessel for improved cell and gene therapy applications , 2021, Biotechnology Letters.

[6]  J. J. Giacomelli,et al.  A spectral approach of suspending solid particles in a turbulent stirred vessel , 2020 .

[7]  Zhengming Gao,et al.  Lifting off a solid sphere from a flat bottom by laminar fluid flow , 2020 .

[8]  J. J. Giacomelli,et al.  Time Scales and Turbulent Spectra above the Base of Stirred Vessels from Large Eddy Simulations , 2020 .

[9]  Yundong Wang,et al.  Numerical simulation of solid-liquid mixing characteristics in a stirred tank with fractal impellers , 2019, Advanced Powder Technology.

[10]  R. Utikar,et al.  Vortex shape and gas‐liquid hydrodynamics in unbaffled stirred tank , 2019, The Canadian Journal of Chemical Engineering.

[11]  M. Uddin,et al.  Effect of Suspension Pattern of Sedimentary Particles on Solid/Liquid Mass Transfer in a Mechanically Stirred Vessel , 2019, Industrial & Engineering Chemistry Research.

[12]  A. Gorbushin,et al.  Steady secondary flow in a turbulent mixing layer , 2019, International Journal of Heat and Mass Transfer.

[13]  T. Mahmud,et al.  CFD modelling of conjugate heat transfer in a pilot‐scale unbaffled stirred tank reactor with a plain jacket , 2018, The Canadian Journal of Chemical Engineering.

[14]  Yundong Wang,et al.  Intensification of chaotic mixing in a stirred tank with a punched rigid-flexible impeller and a chaotic motor , 2017 .

[15]  Yundong Wang,et al.  Numerical simulation of solid-liquid suspension in a stirred tank with a dual punched rigid-flexible impeller , 2017 .

[16]  Yundong Wang,et al.  Solid-liquid mixing performance in a stirred tank with a double punched rigid-flexible impeller coupled with a chaotic motor , 2017 .

[17]  Francesca Scargiali,et al.  On the assessment of power consumption and critical impeller speed in vortexing unbaffled stirred tanks , 2017 .

[18]  A. Paglianti,et al.  Rotary sloshing induced by impeller action in unbaffled stirred vessels , 2017 .

[19]  Alberto Brucato,et al.  Particle Suspension in Vortexing Unbaffled Stirred Tanks , 2016 .

[20]  Alberto Brucato,et al.  Oscillation dynamics of free vortex surface in uncovered unbaffled stirred vessels , 2016 .

[21]  Zhengming Gao,et al.  Suspending a solid sphere in laminar inertial liquid flow—experiments and simulations , 2015 .

[22]  Yundong Wang,et al.  Enhancement of liquid–liquid mixing in a mixer-settler by a double rigid-flexible combination impeller , 2014 .

[23]  Alberto Brucato,et al.  Solid−Liquid Suspensions in Top-Covered Unbaffled Vessels: Influence of Particle Size, Liquid Viscosity, Impeller Size, and Clearance , 2014 .

[24]  Suzanne M. Kresta,et al.  Critical analysis of Zwietering correlation for solids suspension in stirred tanks , 2014 .

[25]  Alberto Brucato,et al.  Mass transfer and hydrodynamic characteristics of unbaffled stirred bio-reactors: Influence of impeller design , 2014 .

[26]  Antonio Busciglio,et al.  Free-surface shape in unbaffled stirred vessels: Experimental study via digital image analysis , 2013 .

[27]  Alberto Brucato,et al.  Power consumption in uncovered-unbaffled stirred tanks: influence of viscosity and flow regime , 2013 .

[28]  A. W. Etchells,et al.  Prediction of just suspended speed for mixed slurries at high solids loadings , 2013 .

[29]  Masanori Yoshida,et al.  Design and operation of unbaffled vessels agitated with an unsteadily forward–reverse rotating impeller handling solid–liquid dispersions , 2012 .

[30]  Suzanne M. Kresta,et al.  Design rules for suspending concentrated mixtures of solids in stirred tanks , 2011 .

[31]  K. Myers,et al.  Solids suspension with angle‐mounted agitators in unbaffled vessels , 2011 .

[32]  Alberto Brucato,et al.  Particle Suspension in Top-Covered Unbaffled Tanks , 2010 .

[33]  Chiara Galletti,et al.  On the main flow features and instabilities in an unbaffled vessel agitated with an eccentrically located impeller , 2008 .

[34]  A. Paglianti,et al.  Effect of Macroinstabilities in Single- and Multiple-Impeller Stirred Tanks , 2008 .

[35]  M. Yoshida,et al.  Agitation requirements for complete solid suspension in an unbaffled agitated vessel with an unsteadily forward–reverse rotating impeller , 2007 .

[36]  John J. Fitzpatrick,et al.  Modelling vortex formation in an unbaffled stirred tank reactors , 2007 .

[37]  G. Montante,et al.  Effect of the shaft eccentricity on the hydrodynamics of unbaffled stirred tanks , 2006 .

[38]  A. Soldati,et al.  Direct numerical simulation of turbulent particle dispersion in an unbaffled stirred-tank reactor , 2006 .

[39]  G. Micale,et al.  Assessment of Particle Suspension Conditions in Stirred Vessels by Means of Pressure Gauge Technique , 2002 .

[40]  C F Dewey,et al.  Turbulent fluid shear stress induces vascular endothelial cell turnover in vitro. , 1986, Proceedings of the National Academy of Sciences of the United States of America.

[41]  J. Y. Oldshue.  SUSPENDING SOLIDS AND DISPERSING GASES IN MIXING VESSEL , 1969 .

[42]  Th.N. Zwietering.  Suspending of solid particles in liquid by agitators , 1958 .

[43]  A. Barresi,et al.  Solid dispersion in an agitated vessel , 1987 .

[44]  C. Buurman,et al.  Scaling-up rules for solids suspension in stirred vessels , 1986 .

[45]  Giancarlo Baldi,et al.  Complete suspension of particles in mechanically agitated vessels , 1978 .