An investigation for the friction torque of a needle roller bearing with the roundness error

[1]  Jing Liu,et al.  An improved analytical model for a lubricated roller bearing including a localized defect with different edge shapes , 2018 .

[2]  Yimin Shao,et al.  Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges , 2017 .

[3]  Iker Heras,et al.  Friction torque in four contact point slewing bearings: Effect of manufacturing errors and ring stiffness , 2017 .

[4]  Yimin Shao,et al.  An analytical model to predict vibrations of a cylindrical roller bearing with a localized surface defect , 2017 .

[5]  A. Mikkola,et al.  A touchdown bearing with surface waviness: Friction loss analysis , 2017 .

[6]  Yimin Shao,et al.  Vibration modelling of nonuniform surface waviness in a lubricated roller bearing , 2017 .

[7]  Seong-Wook Hong,et al.  The effect of angular misalignment on the running torques of tapered roller bearings , 2016 .

[8]  Yimin Shao,et al.  A New Model for the Relationship Between Vibration Characteristics Caused by the Time-Varying Contact Stiffness of a Deep Groove Ball Bearing and Defect Sizes , 2015 .

[9]  Lixin Xu,et al.  Modeling of a deep-groove ball bearing with waviness defects in planar multibody system , 2015 .

[10]  Carl Q. Howard,et al.  Analyses of contact forces and vibration response for a defective rolling element bearing using an explicit dynamics finite element model , 2014 .

[11]  Wim Desmet,et al.  Frictional power loss in solid‐grease‐lubricated needle roller bearing , 2013 .

[12]  Ming J. Zuo,et al.  The effects of the shape of localized defect in ball bearings on the vibration waveform , 2013 .

[13]  Jing Liu,et al.  Vibration analysis of ball bearings with a localized defect applying piecewise response function , 2012 .

[14]  C. K. Babu,et al.  Vibration Modeling of a Rigid Rotor Supported on the Lubricated Angular Contact Ball Bearings Considering Six Degrees of Freedom and Waviness on Balls and Races , 2012 .

[15]  Ahmad Ghanbari,et al.  A new test rig for frictional torque measurement in ball bearings , 2006 .

[16]  Gun-Hee Jang,et al.  Vibration analysis of a rotating system due to the effect of ball bearing waviness , 2004 .

[17]  Homer Rahnejat,et al.  Bearing induced vibration in precision high speed routing spindles , 2000 .

[18]  Y. P. Chiu,et al.  A Rational Approach for Determining Permissible Speed for Needle Roller Bearings , 1998 .

[19]  R. J. Trippett.  Ball and needle bearing friction correlations under radial load conditions , 1985 .

[20]  J. K. Dutt,et al.  Multi-Event Excitation Force Model for Inner Race Defect in a Rolling Element Bearing , 2016 .

[21]  Jing Liu,et al.  A new dynamic model for vibration analysis of a ball bearing due to a localized surface defect considering edge topographies , 2015 .

[22]  Sier Deng,et al.  Analysis on the Friction Torque Fluctuation of Angular Contact Ball Bearings , 2011 .

[23]  Jiansheng Wang,et al.  Active Control Strategy of Flow and Heat Transfer in Channel , 2011 .

[24]  C. R. Gentle,et al.  Measurement of Cage and Pocket Friction in a Ball Bearing for Use in a Simulation Program , 1985 .