Effects of azide on electron transport of exoelectrogens in air-cathode microbial fuel cells.

The effects of azide on electron transport of exoelectrogens were investigated using air-cathode MFCs. These MFCs enriched with azide at the concentration higher than 0.5mM generated lower current and coulomb efficiency (CE) than the control reactors, but at the concentration lower than 0.2mM MFCs generated higher current and CE. Power density curves showed overshoot at higher azide concentrations, with power and current density decreasing simultaneously. Electrochemical impedance spectroscopy (EIS) showed that azide at high concentration increased the charge transfer resistance. These analyses might reflect that a part of electrons were consumed by the anode microbial population rather than transferred to the anode. Bacterial population analyses showed azide-enriched anodes were dominated by Deltaproteobacteria compared with the controls. Based on these results it is hypothesized that azide can eliminate the growth of aerobic respiratory bacteria, and at the same time is used as an electron acceptor/sink.

[1]  Karel J. Keesman,et al.  Effect of Toxic Components on Microbial Fuel Cell-Polarization Curves and Estimation of the Type of Toxic Inhibition , 2012, Biosensors.

[2]  T. Bobik,et al.  Cobalamin (coenzyme B12): synthesis and biological significance. , 1996, Annual review of microbiology.

[3]  R. Thorneley,et al.  Stopped-flow Fourier transform infrared spectroscopy allows continuous monitoring of azide reduction, carbon monoxide inhibition, and ATP hydrolysis by nitrogenase. , 2005, Biochemistry.

[4]  B. Logan,et al.  Mesh optimization for microbial fuel cell cathodes constructed around stainless steel mesh current collectors , 2011 .

[5]  Nanqi Ren,et al.  Syntrophic interactions drive the hydrogen production from glucose at low temperature in microbial electrolysis cells. , 2012, Bioresource technology.

[6]  Keith Scott,et al.  A single-chamber microbial fuel cell as a biosensor for wastewaters. , 2009, Water research.

[7]  Bruce E. Logan,et al.  Treatment of carbon fiber brush anodes for improving power generation in air-cathode microbial fuel cells , 2010 .

[8]  B. Logan,et al.  Brewery wastewater treatment using air-cathode microbial fuel cells , 2008, Applied Microbiology and Biotechnology.

[9]  Bruce E Logan,et al.  Controlling the occurrence of power overshoot by adapting microbial fuel cells to high anode potentials. , 2013, Bioelectrochemistry.

[10]  Bor-Yann Chen,et al.  Reduction of Carbon Dioxide Emission by Using Microbial Fuel Cells during Wastewater Treatment , 2013 .

[11]  Bruce E. Logan,et al.  Analysis of polarization methods for elimination of power overshoot in microbial fuel cells , 2011 .

[12]  R. Ramasamy,et al.  Impact of initial biofilm growth on the anode impedance of microbial fuel cells , 2008, Biotechnology and bioengineering.

[13]  T. Ljones.  Nitrogenase from Clostridium pasteurianum. Changes in optical absorption spectra during electron transfer and effects of ATP, inhibitors and alternative substrates. , 1973, Biochimica et biophysica acta.

[14]  B. Chance,et al.  Azide inhibition of mitochondrial electron transport. I. The aerobic steady state of succinate oxidation. , 1967, Biochimica et biophysica acta.

[15]  N. Ren,et al.  Bioaugmentation for electricity generation from corn stover biomass using microbial fuel cells. , 2009, Environmental science & technology.

[16]  D. Lovley,et al.  Novel Mode of Microbial Energy Metabolism: Organic Carbon Oxidation Coupled to Dissimilatory Reduction of Iron or Manganese , 1988, Applied and environmental microbiology.

[17]  Bruce E Logan,et al.  Energy from algae using microbial fuel cells , 2009, Biotechnology and bioengineering.

[18]  J. Becker,et al.  Design and characterization of a microbial fuel cell for the conversion of a lignocellulosic crop residue to electricity. , 2012, Bioresource technology.

[19]  Byung Hong Kim,et al.  Use of acetate for enrichment of electrochemically active microorganisms and their 16S rDNA analyses. , 2003, FEMS microbiology letters.

[20]  Hong Liu,et al.  Production of electricity during wastewater treatment using a single chamber microbial fuel cell. , 2004, Environmental science & technology.

[21]  M. Dilworth,et al.  Nitrogenase reactivity: azide reduction , 1985 .

[22]  Jae Kyung Jang,et al.  Improvement of a microbial fuel cell performance as a BOD sensor using respiratory inhibitors. , 2005, Biosensors & bioelectronics.

[23]  J. Trevors,et al.  Copper toxicity and uptake in microorganisms , 1990, Journal of Industrial Microbiology.

[24]  A. Gurung,et al.  Assessing acute toxicity of effluent from a textile industry and nearby river waters using sulfur‐oxidizing bacteria in continuous mode , 2011, Environmental technology.

[25]  Meng Wang,et al.  Effect of shear rate on the response of microbial fuel cell toxicity sensor to Cu(II). , 2013, Bioresource technology.

[26]  Hong Liu,et al.  Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane. , 2004, Environmental science & technology.

[27]  Jae Kyung Jang,et al.  Continuous determination of biochemical oxygen demand using microbial fuel cell type biosensor. , 2004, Biosensors & bioelectronics.

[28]  Byung Hong Kim,et al.  Electricity generation coupled to oxidation of propionate in a microbial fuel cell , 2009, Biotechnology Letters.