The interlayer gap and non-coaxiality in stack drilling

Abstract Interlayer gap formation during through-hole drilling in stacked structures is a common problem in large assembly operations. The resulting interfacial burrs and non-coaxial stacked holes deteriorate the machining quality and increase the overall assembly time and costs. This study presents both experimental work and theoretical analysis to understand the interlayer gap formations and non-coaxiality occurrences in the drilling of stacked structures of broad skins and narrow stringers, which imitate typical structures of large assemblies. First, some stack drilling experiments are specially designed and are performed to observe that the stacked holes are non-coaxial in a regular fashion by measuring the hole diameters of the upper layer, lower layer and interface. Then, a simplified mechanical model of the stacks is built in 2-D to study how the interlayer gaps and non-coaxiality are formed during stack drilling. Through quantitative analysis based on the simplified model, it is noted that the stack stiffness, drilling thrust force and pressing force have important impact on the interlayer gaps and non-coaxiality. Finally, finite element methods are adopted to present the deformations in 3-D. The calculation results agree with the theoretical explanations for non-coaxiality given by the analytical simplified model. In addition, the beneficial effects of the fasteners and ribs are discussed based on the calculation results, and thus, they could contribute to proposals for better designs for stack drilling.

[1]  Paul Xirouchakis,et al.  Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components , 2008 .

[2]  David K. Aspinwall,et al.  Drill geometry and operating effects when cutting small diameter holes in CFRP , 2009 .

[3]  Berend Denkena,et al.  Experimental investigation and modeling of thermal and mechanical influences on shape deviations in machining structural parts , 2010 .

[4]  C. C. Tsao,et al.  Effect of induced bending moment (IBM) on critical thrust force for delamination in step drilling of composites , 2012 .

[5]  John E. Inman,et al.  ONCE (ONe-sided Cell End effector) Robotic Drilling System , 2002 .

[6]  Svetan Ratchev,et al.  Force and deflection modelling in milling of low-rigidity complex parts , 2003 .

[7]  Yanbin Yao.  Design and Experiment of a Robot Automatic Drilling System , 2014 .

[8]  R. Wertheim,et al.  Acoustic emission for controlling drill position in fiber-reinforced plastic and metal stacks , 2012 .

[9]  Patrick Kwon,et al.  Wear characteristic on BAM coated carbide tool in drilling of composite/titanium stack , 2012 .

[10]  Weihong Zhang,et al.  Strategies for error prediction and error control in peripheral milling of thin-walled workpiece , 2008 .

[11]  Reimund Neugebauer,et al.  Acoustic emission as a tool for identifying drill position in fiber-reinforced plastic and aluminum stacks , 2012 .

[12]  Svetan Ratchev,et al.  Modelling and simulation environment for machining of low-rigidity components , 2004 .

[13]  Svetan Ratchev,et al.  A flexible force model for end milling of low-rigidity parts , 2004 .

[14]  David K. Aspinwall,et al.  Drilling of Titanium/CFRP/Aluminium Stacks , 2010 .

[15]  Liu Zhanqiang,et al.  Deformations of thin-walled plate due to static end milling force , 2008 .

[16]  L. Gang.  Study on deformation of titanium thin-walled part in milling process , 2009 .

[17]  L. N. López de Lacalle,et al.  Monitoring of drilling for burr detection using spindle torque , 2005 .

[18]  Ekkard Brinksmeier,et al.  Drilling of Multi-Layer Composite Materials consisting of Carbon Fiber Reinforced Plastics (CFRP), Titanium and Aluminum Alloys , 2002 .

[19]  Liang Jie,et al.  The formation and effect of interlayer gap in dry drilling of stacked metal materials , 2013 .

[20]  Patrick Kwon,et al.  Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools , 2011 .

[21]  Redouane Zitoune,et al.  Study of drilling of composite material and aluminium stack , 2010 .

[22]  Svetan Ratchev,et al.  Milling error prediction and compensation in machining of low-rigidity parts , 2004 .

[23]  Redouane Zitoune,et al.  Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich , 2012 .

[24]  Hui Cheng,et al.  Efficient method of positioning error analysis for aeronautical thin-walled structures multi-state riveting , 2011 .

[25]  David K. Aspinwall,et al.  Hole quality assessment following drilling of metallic-composite stacks , 2011 .

[26]  John B. Morehouse,et al.  Interfacial Burr Formation in Drilling of Stacked Aerospace Materials , 2010 .