Iterative multiuser receiver for space-time coded asynchronous CDMA systems

An iterative multiuser receiver is proposed for space-time coded asynchronous CDMA systems. The proposed receiver consists of a matched filter bank, decorrelating detector, space-time decoder and parallel interference canceller. The space-time decoded signals are fed into the parallel interference canceller. Once the multiuser interference is cancelled, the detected signals from the parallel interference canceller are fed back to the space-time decoder. This process continues iteratively. Performance of the proposed receiver is evaluated under flat and frequency selective fading channels. Simulation results show that the system performance improves with the number of iterations. As expected, the performance margin diminishes with the number of iterations.

[1]  Siavash M. Alamouti,et al.  A simple transmit diversity technique for wireless communications , 1998, IEEE J. Sel. Areas Commun..

[2]  A. Robert Calderbank,et al.  Space-Time Codes for High Data Rate Wireless Communications : Performance criterion and Code Construction , 1998, IEEE Trans. Inf. Theory.

[3]  Kyung Sup Kwak,et al.  The application of space-time codes in CDMA systems , 2001, IEEE VTS 53rd Vehicular Technology Conference, Spring 2001. Proceedings (Cat. No.01CH37202).

[4]  G. Klang,et al.  Transmit diversity based on space-time block codes in frequency selective Rayleigh fading DS-CDMA systems , 2000, VTC2000-Spring. 2000 IEEE 51st Vehicular Technology Conference Proceedings (Cat. No.00CH37026).

[5]  A. Robert Calderbank,et al.  Space-Time block codes from orthogonal designs , 1999, IEEE Trans. Inf. Theory.

[6]  H. Vincent Poor,et al.  Iterative multiuser detection for space-time coded synchronous CDMA , 2001, IEEE 54th Vehicular Technology Conference. VTC Fall 2001. Proceedings (Cat. No.01CH37211).

[7]  S. Moshavi,et al.  Multi-user detection for DS-CDMA communications , 1996, IEEE Commun. Mag..