Mobile robot vision system using continuous laser scanning for industrial application

Purpose The purpose of this paper is the presentation and research of a novel robot vision system, which uses laser dynamic triangulation, to determine three-dimensional (3D) coordinates of an observed object. The previously used physical operation principle of discontinuous scanning method is substituted by continuous method. Thereby applications become possible that were previously limited by this discretization. Design/methodology/approach The previously used prototype No. 2, which uses stepping motors to realize a discontinuous laser scan, was substituted by the new developed prototype No. 3, which contains servomotors, to achieve a continuous laser scan. The new prototype possesses only half the width and turns out to be significantly smaller and therefore lighter than the old one. Furthermore, no transmissions are used, which reduce the systematic error of laser positioning and increase the system reliability. Findings By using a continuous laser scan method instead of discontinuous laser scan method, dead zones in the laser scanner field can be eliminated. Thereby, also by changing the physical operation principle, the implementation of applications is allowed, which previously was limited by the fixed step size or by the object distance under observation. By using servomotors instead of stepping motors, also a significant reduced positioning time can be accomplished maintaining the relative positioning error less than 1 per cent. Originality/value The originality is based on the substitution of the physical operation principle of discontinuous by continuous laser scan. The previously used stepping motors discretized the laser scanner field and thereby produced dead zones, where 3D coordinates cannot be detected. These stepping motors were substituted by servomotors to revoke these disadvantages and provide a continuous laser scan, where dead zones in the field of view get eliminated and the step response of the laser scanner accelerated.

[1]  Richard Leach.  Introduction to Metrology for Advanced Manufacturing and Micro- and Nanotechnology , 2014 .

[2]  Oleg Sergiyenko,et al.  An approach for dynamic triangulation using servomotors , 2014, 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE).

[3]  S. Hiremath,et al.  Laser range finder model for autonomous navigation of a robot in a maize field using a particle filter , 2014 .

[4]  Atsushi Imiya,et al.  Appearance-based navigation and homing for autonomous mobile robot , 2013, Image Vis. Comput..

[5]  Gonzalo Pajares,et al.  Automatic expert system for 3D terrain reconstruction based on stereo vision and histogram matching , 2014, Expert Syst. Appl..

[6]  Moises Rivas-Lopez,et al.  Optimization of 3D laser scanning speed by use of combined variable step , 2014 .

[7]  Oleg Sergiyenko,et al.  Surface recognition improvement in 3D medical laser scanner using Levenberg-Marquardt method , 2013, Signal Process..

[8]  Moises Rivas-Lopez,et al.  Pulse width influence in fast frequency measurements using rational approximations , 2016 .

[9]  Oleg Starostenko,et al.  Electromechanical 3D Optoelectronic Scanners: Resolution Constraints and Possible Ways of Improvement , 2011 .

[10]  Robert Bogue.  Sensors for robotic perception. Part two: positional and environmental awareness , 2015, Ind. Robot.

[11]  Paolo Dario,et al.  Development of a low-cost active 3D triangulation laser scanner for indoor navigation of miniature mobile robots , 2012, Robotics Auton. Syst..

[12]  Ole Madsen,et al.  Integration of mobile manipulators in an industrial production , 2015, Ind. Robot.

[13]  Paul H. Lewis,et al.  An automated algorithm for extracting road edges from terrestrial mobile LiDAR data , 2013 .

[14]  Antonio Barrientos,et al.  Tracking and following pedestrian trajectories, an approach for autonomous surveillance of critical infrastructures , 2015, Ind. Robot.

[15]  Julio C. Rodriguez-Quinonez,et al.  Optical monitoring of scoliosis by 3D medical laser scanner , 2014 .

[16]  Nanfeng Xiao,et al.  Volumetric view planning for 3D reconstruction with multiple manipulators , 2015, Ind. Robot.

[17]  Wendy Flores-Fuentes,et al.  Combined application of Power Spectrum Centroid and Support Vector Machines for measurement improvement in Optical Scanning Systems , 2014, Signal Process..

[18]  Andrei Tchernykh,et al.  Data transferring model determination in robotic group , 2016, Robotics Auton. Syst..

[19]  Robert Bogue.  Sensors for robotic perception. Part one: human interaction and intentions , 2015, Ind. Robot.

[20]  Oleg Sergiyenko,et al.  Continuous 3D scanning mode using servomotors instead of stepping motors in dynamic laser triangulation , 2015, 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE).

[21]  Oleg Starostenko,et al.  Optical 3D laser measurement system for navigation of autonomous mobile robot , 2014 .

[22]  Dinggen Li,et al.  A study on laser speckle correlation method applied in triangulation displacement measurement , 2013 .

[23]  Richard K. Leach,et al.  Fundamental Principles of Engineering Nanometrology , 2009 .

[24]  Wendy Flores-Fuentes,et al.  Energy Center Detection in Light Scanning Sensors for Structural Health Monitoring Accuracy Enhancement , 2014, IEEE Sensors Journal.