Effect of cesium chloride modification on the film morphology and UV-induced stability of planar perovskite solar cells

The interface modification of perovskite thin films has shown great potential to boost the performance of perovskite solar cells during the last few years. Here we demonstrate that cesium chloride (CsCl) as crystal seeds can markedly enhance the coverage of the CH3NH3PbI3−xClx absorber layer on TiO2 in planar heterojunction solar cells, thus boosting the power conversion efficiency (PCE) to 16.8%, with a fill factor (FF) of 0.79. Also, the introduction of CsCl significantly improved the stability of CH3NH3PbI3−xClx under ultra violet (UV) irradiation, which has been verified by XRD, XPS and SEM measurements. The CsCl-treated devices maintained 70% of the original PCE after a prolonged intensive UV irradiation of 200 min while the untreated devices being almost exhausted. Furthermore, we proposed the mechanism concerning CsCl as the modification layer to improve the UV-induced stability issue of perovskite solar cells.

[1]  Bert Conings,et al.  Perovskite‐Based Hybrid Solar Cells Exceeding 10% Efficiency with High Reproducibility Using a Thin Film Sandwich Approach , 2014, Advanced materials.

[2]  Mercouri G Kanatzidis,et al.  Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties. , 2013, Inorganic chemistry.

[3]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[4]  J. Noh,et al.  Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors , 2013, Nature Photonics.

[5]  J. Noh,et al.  Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. , 2013, Nano letters.

[6]  Sergei Tretiak,et al.  High-efficiency solution-processed perovskite solar cells with millimeter-scale grains , 2015, Science.

[7]  M. Grätzel,et al.  Title: Long-Range Balanced Electron and Hole Transport Lengths in Organic-Inorganic CH3NH3PbI3 , 2017 .

[8]  Seigo Ito,et al.  Effects of Surface Blocking Layer of Sb2S3 on Nanocrystalline TiO2 for CH3NH3PbI3 Perovskite Solar Cells , 2014 .

[9]  Xiaobo Chen,et al.  Titanium dioxide-based nanomaterials for photocatalytic fuel generations. , 2014, Chemical reviews.

[10]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[11]  F. So,et al.  High‐Efficiency Solution‐Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer , 2015 .

[12]  Eric T. Hoke,et al.  A layered hybrid perovskite solar-cell absorber with enhanced moisture stability. , 2014, Angewandte Chemie.

[13]  Philip Schulz,et al.  Interface energetics in organo-metal halide perovskite-based photovoltaic cells , 2014 .

[14]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[15]  Peng Gao,et al.  Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells. , 2012, Journal of the American Chemical Society.

[16]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[17]  F. Angelis.  Modeling Materials and Processes in Hybrid/Organic Photovoltaics: From Dye-Sensitized to Perovskite Solar Cells , 2014 .

[18]  T. Hu,et al.  Influence of air exposure on CsI photocathodes , 2012 .

[19]  M. Grätzel,et al.  A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability , 2014, Science.

[20]  Aslihan Babayigit,et al.  Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite , 2015 .

[21]  E. Mosconi,et al.  First-Principles Investigation of the TiO2/Organohalide Perovskites Interface: The Role of Interfacial Chlorine. , 2014, The journal of physical chemistry letters.

[22]  Xiaohong Wang,et al.  Photocatalytic activity of heterostructures based on TiO2 and halloysite nanotubes. , 2011, ACS applied materials & interfaces.

[23]  T. Mallouk,et al.  Understanding the Effect of Monomeric Iridium(III/IV) Aquo Complexes on the Photoelectrochemistry of IrO(x)·nH2O-Catalyzed Water-Splitting Systems. , 2015, Journal of the American Chemical Society.

[24]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[25]  G. Gigli,et al.  Stark effect in perovskite/TiO2 solar cells: evidence of local interfacial order. , 2014, Nano letters.

[26]  Yaohua Mai,et al.  Controllable Grain Morphology of Perovskite Absorber Film by Molecular Self-Assembly toward Efficient Solar Cell Exceeding 17%. , 2015, Journal of the American Chemical Society.

[27]  Xiang Fang,et al.  Improvement of the humidity stability of organic–inorganic perovskite solar cells using ultrathin Al2O3 layers prepared by atomic layer deposition , 2015 .

[28]  E. Sargent,et al.  Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals , 2015, Science.

[29]  Xudong Guo,et al.  Multifunctional MgO Layer in Perovskite Solar Cells. , 2015, Chemphyschem : a European journal of chemical physics and physical chemistry.

[30]  Sandeep Kumar Pathak,et al.  Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells , 2013, Nature Communications.

[31]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[32]  Yong Qiu,et al.  Study on the stability of CH3NH3PbI3films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells , 2014 .

[33]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[34]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[35]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[36]  Matthew R. Leyden,et al.  Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells , 2015 .

[37]  Gang Li,et al.  Doping of the Metal Oxide Nanostructure and its Influence in Organic Electronics , 2009 .

[38]  M. Gorgoi,et al.  Electronic Structure of TiO2/CH3NH3PbI3 Perovskite Solar Cell Interfaces. , 2014, The journal of physical chemistry letters.

[39]  I. Černušák,et al.  Microhydration of caesium compounds: Cs, CsOH, CsI and Cs2I2 complexes with one to three H2O molecules of nuclear safety interest , 2014, Journal of Molecular Modeling.

[40]  H. Rensmo,et al.  Chemical and Electronic Structure Characterization of Lead Halide Perovskites and Stability Behavior under Different Exposures—A Photoelectron Spectroscopy Investigation , 2015 .

[41]  Guangda Niu,et al.  Post modification of perovskite sensitized solar cells by aluminum oxide for enhanced performance , 2013 .