Asymmetry of strain rate sensitivity between up- and down-changes in 6000 series aluminium alloys of varying Si content

[1]  A. Deschamps,et al.  Understanding the Role of Cu and Clustering on Strain Hardening and Strain Rate Sensitivity of Al-Mg-Si-Cu Alloys , 2019, Light Metals 2019.

[2]  M. Niewczas,et al.  Flow stress and electrical resistivity in plastically deformed Al subjected to intermittent annealing , 2017 .

[3]  C. Fressengeas,et al.  On the strain rate dependence of the critical strain for plastic instabilities in Al-Mg alloys , 2017 .

[4]  Qing Liu,et al.  Effect of Ag and Cu additions on natural aging and precipitation hardening behavior in Al-Mg-Si alloys , 2017 .

[5]  Armand Joseph Beaudoin,et al.  Strain rate jump induced negative strain rate sensitivity (NSRS) in aluminum alloy 2024: Experiments and constitutive modeling , 2017 .

[6]  Tatsuo Sato,et al.  Effects of natural aging after pre-aging on clustering and bake-hardening behavior in an Al–Mg–Si alloy , 2016 .

[7]  Bin Wang,et al.  Effect of natural ageing and pre-straining on the hardening behaviour and microstructural response during artificial ageing of an Al–Mg–Si–Cu alloy , 2016 .

[8]  N. Provatas,et al.  Cluster evolution mechanisms during aging in Al–Mg–Si alloys , 2016 .

[9]  M. Zandbergen,et al.  Study of precipitation in Al–Mg–Si Alloys by atom probe tomography II. Influence of Cu additions , 2015 .

[10]  Chunhui Liu,et al.  The influence of Mg/Si ratio on the negative natural aging effect in Al–Mg–Si–Cu alloys , 2015 .

[11]  Qing Liu,et al.  The natural aging and precipitation hardening behaviour of Al-Mg-Si-Cu alloys with different Mg/Si ratios and Cu additions , 2015 .

[12]  R. Mishra,et al.  Thermally activated flow of dislocations in Al–Mg binary alloys , 2015 .

[13]  N. Provatas,et al.  Atomic-scale pathway of early-stage precipitation in Al–Mg–Si alloys , 2014, 1407.6412.

[14]  Jürgen Hirsch,et al.  Recent development in aluminium for automotive applications , 2014 .

[15]  M. Weyland,et al.  The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys , 2013 .

[16]  M. Couper,et al.  Effect of pre-ageing and natural ageing on the paint bake response of alloy AA6181A , 2013 .

[17]  Jaehwan Kim,et al.  Formation Behavior of Nanoclusters in Al­Mg­Si Alloys with Different Mg and Si Concentration , 2013 .

[18]  Jaehwan Kim,et al.  Effects of Cu Addition on Behavior of Nanoclusters during Multi-Step Aging in Al-Mg-Si Alloys , 2011 .

[19]  W. Curtin.  New interpretation of the Haasen plot for solute-strengthened alloys , 2010 .

[20]  R. C. Picu,et al.  Aluminum Alloys with Identical Plastic Flow and Different Strain Rate Sensitivity , 2010 .

[21]  R. C. Picu,et al.  On the relationship between the Cottrell―Stokes law and the Haasen plot , 2010 .

[22]  H. Larsen,et al.  Kinetic analysis of dynamic point defect pinning in aluminium initiated by strain rate changes , 2009 .

[23]  S. Saimoto.  Dynamic dislocation–defect analysis , 2006 .

[24]  Xiang Wang,et al.  The sequence of precipitation in the Al-Mg-Si-Cu alloy AA6111 , 2006 .

[25]  D. Lloyd,et al.  Characterization of the evolution of the volume fraction of precipitates in aged AlMgSiCu alloys using DSC technique , 2005 .

[26]  Evan Ma,et al.  Strain hardening, strain rate sensitivity, and ductility of nanostructured metals , 2004 .

[27]  J. Hirsch,et al.  Automotive Trends in Aluminium - The European Perspective , 2004 .

[28]  M. Starink,et al.  A Model for the Yield Strength of Overaged Al-Zn-Mg-Cu Alloys , 2003 .

[29]  M. Niewczas,et al.  Transmission electron microscopy observations of debris structure in deformed copper single crystals , 2002 .

[30]  A. Deschamps,et al.  The deformation behaviour of AA6111 as a function of temperature and precipitation state , 2001 .

[31]  K. Hono,et al.  The effect of Cu additions on the precipitation kinetics in an Al-Mg-Si alloy with excess Si , 2001 .

[32]  B. Diak,et al.  Characterization of thermodynamic response by materials testing , 1998 .

[33]  B. Diak.  Microplastic bases for constitutive characterization of aluminum alloys and their correlation to sheet formability , 1997 .

[34]  M. Carlone,et al.  Precision strain rate sensitivity measurement using the step-ramp method , 1996 .

[35]  P. Bate.  The effects of combined strain-path and strain-rate changes in aluminum , 1993, Metallurgical and Materials Transactions A.

[36]  P. McCormick,et al.  The effect of temperature on strain rate sensitivity in an AlMgSi alloy , 1993 .

[37]  S. Saimoto,et al.  Superposition of thermal activation processes in quenched aluminum - 1.7 at% copper , 1993 .

[38]  E. A. Starke,et al.  Overview no. 102 Theory assisted design of high strength low alloy aluminum , 1993 .

[39]  P. McCormick,et al.  Strain rate sensitivity and transient behaviour in an AlMgSi alloy , 1990 .

[40]  F. Nabarro.  Cottrell-stokes law and activation theory , 1990 .

[41]  J. Klepaczko,et al.  On rate sensitivity of f.c.c. metals, instantaneous rate sensitivity and rate sensitivity of strain hardening , 1986 .

[42]  M. Duesbery,et al.  Strain rate sensitivity: The role of dislocation loop and point defect recovery , 1984 .

[43]  S. Saimoto,et al.  A re-examination of the cottrell-stokes relation based on precision measurements of the activation volume , 1983 .

[44]  Kenneth W. Neale,et al.  Limit strain predictions for strain-rate sensitive anisotropic sheets , 1980 .

[45]  John W. Hutchinson,et al.  Sheet Necking-III. Strain-Rate Effects , 1978 .

[46]  Amit K. Ghosh.  Tensile instability and necking in materials with strain hardening and strain-rate hardening , 1977 .

[47]  John W. Hutchinson,et al.  Influence of strain-rate sensitivity on necking under uniaxial tension , 1977 .

[48]  A. Ghosh,et al.  The Influence of Strain Hardening and Strain-Rate Sensitivity on Sheet Metal Forming , 1977 .

[49]  E. W. Hart.  Theory of the tensile test , 1967 .

[50]  P. Haasen.  Plastic deformation of nickel single crystals at low temperatures , 1958 .

[51]  A. Cottrell,et al.  Effects of temperature on the plastic properties of aluminium crystals , 1955, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.