A new GPS-acoustic method for measuring ocean floor crustal deformation: Application to the Nankai Trough

[1] We developed a new geodetic method of monitoring crustal deformation on the ocean floor. The measurements were conducted at two sites beneath the Pacific Ocean, near the Nankai Trough, where the Philippine Sea plate subducts into the Pacific plate. The first site was at a depth of 700 m in Suruga Bay, and the second one was at a depth of 2000 m in the Kumano Basin. At each survey site, three seafloor transponders, whose positions were repetitively measured, were deployed to define a benchmark unit. An ultrasonic signal was generated from a surface vessel drifting over the benchmark unit that was transmitting and receiving the signal and the replies from the transponders. Both sound speed structure and the benchmark unit positions were determined simultaneously using a tomographic technique. We repeatedly carried out measurements over the two sites. For the Kumano Basin we made six measurements from July 2004 to August 2005. The benchmark unit location's horizontal precision was 5 cm, and its vertical precision was 10 cm. For Suruga Bay we made five measurements, and the positions were less accurate, with horizontal variation of 7 cm and vertical variation of 16 cm. We investigated the reason for the decreased precision in Suruga Bay with a numerical experiment, and the results revealed that the geometry of the measurement, that is, the vessel's path, is one of the most important variables in our method. At the Kumano Basin a 21.5-cm southward displacement of the benchmark unit was detected just below the site before and after a large earthquake (Mw 7.5). Our observation system therefore proved itself capable of detecting seafloor crustal deformation associated with crustal activities in offshore areas.