At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics.

In this paper we report a centrifugal microfluidic "lab-on-a-disc" system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL(-1) of hIgG.

[1]  Brian D. MacCraith,et al.  A biochip reader using super critical angle fluorescence , 2009 .

[2]  Roland Zengerle,et al.  Microfluidic platforms for lab-on-a-chip applications. , 2007, Lab on a chip.

[3]  K. Jensen,et al.  Multiphase microfluidics: from flow characteristics to chemical and materials synthesis. , 2006, Lab on a chip.

[4]  Simple approach to study biomolecule adsorption in polymeric microfluidic channels. , 2013, Analytica chimica acta.

[5]  A. Shard,et al.  Chemical and biological characterisation of a sensor surface for bioprocess monitoring. , 2010, Biosensors & bioelectronics.

[6]  Jin‐Ming Lin,et al.  Comparison of two different deposition methods of 3-aminopropyltriethoxysilane on glass slides and their application in the ThinPrep cytologic test. , 2012, The Analyst.

[7]  Suna Timur,et al.  A new set up for multi-analyte sensing: at-line bio-process monitoring. , 2011, Biosensors & bioelectronics.

[8]  Daniel Pioch,et al.  At‐line Monitoring of Bioprocess‐Relevant Marker Genes , 2007 .

[9]  R. Burger,et al.  Comprehensive integration of homogeneous bioassays via centrifugo-pneumatic cascading. , 2013, Lab on a chip.

[10]  Teodor Veres,et al.  Serial siphon valving for centrifugal microfluidic platforms , 2010 .

[11]  R. Zengerle,et al.  Integrated siphon-based metering and sedimentation of whole blood on a hydrophilic lab-on-a-disk , 2007, Biomedical microdevices.

[12]  Mischa Megens,et al.  Integrated microfluidic bioprocessor for solid phase capture immunoassays. , 2011, Lab on a chip.

[13]  W. Verboom,et al.  Optical sensing systems for microfluidic devices: a review. , 2007, Analytica chimica acta.

[14]  D. Erickson,et al.  Integrated microfluidic devices , 2004 .

[15]  Bruce D. Hammock,et al.  Disc-based immunoassay microarrays , 2000 .

[16]  Manuel Miró,et al.  Miniaturization of environmental chemical assays in flowing systems: the lab-on-a-valve approach vis-à-vis lab-on-a-chip microfluidic devices. , 2007, Analytica chimica acta.

[17]  Marc Madou,et al.  Microfluidic device for rapid (<15 min) automated microarray hybridization. , 2005, Clinical chemistry.

[18]  Rajeev J Ram,et al.  In situ bioprocess monitoring of Escherichia coli bioreactions using Raman spectroscopy , 2004 .

[19]  D. Bartholomeusz,et al.  Xurography: rapid prototyping of microstructures using a cutting plotter , 2005, Journal of Microelectromechanical Systems.

[20]  Jintae Kim,et al.  Centrifugal microfluidics for biomedical applications. , 2010, Lab on a chip.

[21]  T. Schepera,et al.  Bioanalytics : detailed insight into bioprocesses , 1999 .

[22]  Pascal Colpo,et al.  A printed nanolitre-scale bacterial sensor array. , 2011, Lab on a chip.

[23]  D. Dowling,et al.  Enhancing the Mechanical Properties of Superhydrophobic Atmospheric Pressure Plasma Deposited Siloxane Coatings , 2011 .

[24]  Michael F. Toney,et al.  High efficiency amine functionalization of cycloolefin polymer surfaces for biodiagnostics , 2010 .

[25]  Marc Madou,et al.  Lab on a CD. , 2006, Annual review of biomedical engineering.

[26]  Carl-Fredrik Mandenius,et al.  Recent developments in the monitoring, modeling and control of biological production systems , 2004, Bioprocess and biosystems engineering.

[27]  Jens Ducrée,et al.  Centrifugo-pneumatic valving utilizing dissolvable films. , 2012, Lab on a chip.

[28]  David E. Williams,et al.  Functionalization of cycloolefin polymer surfaces by plasma-enhanced chemical vapour deposition: comprehensive characterization and analysis of the contact surface and the bulk of aminosiloxane coatings. , 2010, The Analyst.

[29]  Roland Zengerle,et al.  The centrifugal microfluidic Bio-Disk platform , 2007 .

[30]  R. Zengerle,et al.  Visualization of flow patterning in high-speed centrifugal microfluidics , 2005 .

[31]  J. Park,et al.  Plasma extraction in a capillary-driven microfluidic device using surfactant-added poly(dimethylsiloxane) , 2010 .

[32]  Yi Zhang,et al.  An integrated fluorescence detection system for lab-on-a-chip applications. , 2007, Lab on a chip.

[33]  R. Keiski,et al.  Evaluation of the anti-fouling properties of nm thick atmospheric plasma deposited coatings , 2010 .

[34]  Bernd Hitzmann,et al.  Bioanalytics: detailed insight into bioprocesses , 1999 .