Graphite nodule count and size distribution in thin-walled ductile cast iron

Abstract Graphite nodule count and size distribution have been analysed in thin-walled ductile cast iron. The 2-D nodule counts have been converted into 3-D nodule counts by using a finite difference method (FDM). Particles having a diameter smaller than 5 μm should be neglected in the nodule count as these are inclusions and microporosities that do not influence the solidification morphology. If there are many small graphite nodules, as in thin-walled castings, only 3-D nodule counts calculated by FDM will give reliable results. 2-D nodule counts and 3-D nodule counts calculated by simple equations will give low results. The 3-D size distribution showed the presence of primary graphite nodules in hypereutectic castings. In thin plates the nodule count is similar in both eutectic and hypereutectic plates. In thicker plates the hypereutectic casting has the higher nodule count.

[1]  Jacques Lacaze,et al.  Solidification of spheroidal graphite cast irons—II. numerical simulation , 1998 .

[2]  C. Labrecque,et al.  Review ductile iron: fifty years of continuous development , 1998 .

[3]  Ø. Grong,et al.  A model for the graphite formation in ductile , 1993, Metallurgical and Materials Transactions A.

[4]  Ø. Grong,et al.  A model for the graphite formation in , 1993, Metallurgical and Materials Transactions A.

[5]  Arijit Sengupta,et al.  Development of a FDM based code to determine the 3-D size distribution of homogeneously dispersed spherical second phase from microstructure: a case study on nodular cast iron , 2004 .

[6]  J. Hawk,et al.  Microstructure of thin-wall ductile iron castings , 2003 .

[7]  M. Jacobs,et al.  Basic processes controlling the nucleation of graphite nodules in chill cast iron , 1974 .

[8]  Satoru Yamamoto,et al.  On the Solidification Process of Nodular Cast Iron , 1977 .

[9]  M. Wessén,et al.  Modeling of ferrite growth in nodular cast iron , 1996 .

[10]  Christian Charbon.  Modélisation stochastique de la solidification eutectique équiaxe , 1995 .

[11]  C. Labrecque,et al.  Ductile Iron: Fifty Years of Continuous Development , 1998 .

[12]  Roberto Enrique Boeri,et al.  Shape and Count of Free Graphite Particles in Thin Wall Ductile Iron Castings , 2002 .

[13]  Yuichi Tanaka,et al.  Evaluation of Fatigue Limit of Spheroidal Graphite Cast Iron , 1995 .

[14]  Kenneth Hamberg,et al.  On the solidification sequence of ductile iron castings containing chunky graphite , 2005 .