Tensile Behavior and Durability Prediction of GFRP-Steel Composite Bars under Chloride Environments

[1]  Qingtian Zhang,et al.  Durability of FRP bars and FRP bar reinforced seawater sea sand concrete structures in marine environments , 2022, Construction and Building Materials.

[2]  Lihai Zhang,et al.  The effects of cyclic fluid pressure on time-dependent corrosion behaviour of offshore concrete caused by chloride ions , 2022, Mechanics of Time-Dependent Materials.

[3]  S. Hosseini,et al.  Using four-point flexure test to investigate effects of temperature and bar size on the tensile properties of GFRP bars , 2022, Polymer Testing.

[4]  Chuansheng Xiong,et al.  Deterioration of basalt/carbon-based hybrid-FRP bars in a simulated pore solution of seawater sea-sand concrete , 2022, Journal of Building Engineering.

[5]  Lihai Zhang,et al.  Bond behavior between GFRP bars and seawater sea-sand fiber-reinforced ultra-high strength concrete , 2022, Engineering Structures.

[6]  Yong-Chang Guo,et al.  Behavior of concrete-filled FRP tube columns internally reinforced with FRP-steel composite bars under axial compression , 2022, Construction and Building Materials.

[7]  Lijuan Li,et al.  Experimental study on flexural behavior of concrete beam reinforced with GFRP and steel-fiber composite bars , 2021 .

[8]  T. Tafsirojjaman,et al.  Environmental impact on the durability of FRP reinforcing bars , 2021 .

[9]  Lihai Zhang,et al.  Bond Behavior between GFRP Bars and High Strength and Ultra-High Strength Fiber Reinforced Seawater Sea-sand Concrete (SSC) under Pullout Loading , 2021, Composite Structures.

[10]  Qing Wu,et al.  Numerical study on the effect of transverse crack self-healing on the corrosion rate of steel bar in concrete , 2021 .

[11]  A. Ashour,et al.  Tension and bonding behaviour of steel-FRP composite bars subjected to the coupling effects of chloride corrosion and load , 2021 .

[12]  W. Yao,et al.  Residual stiffness characterization of FRP laminates under random block spectrum , 2021 .

[13]  S. Lucas,et al.  Mechanical characterization of particulated FRP composite pipes: A comprehensive experimental study , 2020 .

[14]  Yu Zheng,et al.  Fiber reinforced polymer-confined concrete under high strain rate compression: Behavior and a unified dynamic strength model , 2020 .

[15]  A. Ashour,et al.  Flexural performance of FRP/steel hybrid reinforced engineered cementitious composite beams , 2020 .

[16]  B. Benmokrane,et al.  Comparative durability of GFRP composite reinforcing bars in concrete and in simulated concrete environments , 2020 .

[17]  Moyeenuddin Ahmad Sawpan,et al.  Shear properties and durability of GFRP reinforcement bar aged in seawater , 2019, Polymer Testing.

[18]  F. Xing,et al.  Experimental investigations on corrosion resistance of innovative steel-FRP composite bars using X-ray microcomputed tomography , 2019, Composites Part B: Engineering.

[19]  Gang Wu,et al.  Bond durability of steel-FRP composite bars embedded in seawater sea-sand concrete under constant bending and shearing stress , 2018, Construction and Building Materials.

[20]  Esmaeil Pournamazian Najafabadi,et al.  Effect of intumescent paint coating on mechanical properties of FRP bars at elevated temperature , 2018, Polymer Testing.

[21]  Cristina Miàs Oller,et al.  Durability and degradation mechanisms of GFRP reinforcement subjected to severe environments and sustained stress , 2018 .

[22]  Mariateresa Lettieri,et al.  Durability Issues and Challenges for Material Advancements in FRP Employed in the Construction Industry , 2018, Polymers.

[23]  A. A. Krasnov,et al.  Geometric and mechanical characterization of ribbed FRP rebars , 2017 .

[24]  B. Benmokrane,et al.  Effects of Diameter on the Durability of Glass Fiber–Reinforced Polymer Bars Conditioned in Alkaline Solution , 2017 .

[25]  Guijun Xian,et al.  Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment , 2017 .

[26]  Gang Wu,et al.  Mechanical Properties of Steel-FRP Composite Bars under Tensile and Compressive Loading , 2017 .

[27]  Gang Wu,et al.  Experimental study on the bond durability between steel-FRP composite bars (SFCBs) and sea sand concrete in ocean environment , 2016 .

[28]  S. Lenci,et al.  Basalt fiber ropes and rods: Durability tests for their use in building engineering , 2016 .

[29]  Weiqing Liu,et al.  Durability and prediction models of fiber-reinforced polymer composites under various environmental conditions: A critical review , 2016 .

[30]  Zhishen Wu,et al.  Prediction of Long-Term Performance and Durability of BFRP Bars under the Combined Effect of Sustained Load and Corrosive Solutions , 2015 .

[31]  Kypros Pilakoutas,et al.  Mechanical characterization of basalt FRP rebars and long-term strength predictive model , 2015 .

[32]  Tarek H. Almusallam,et al.  Effect of harsh environmental conditions on the tensile properties of GFRP bars , 2013 .

[33]  J. Davalos,et al.  Long-term durability prediction models for GFRP bars in concrete environment , 2012 .

[34]  Chang-Shik Min,et al.  Optimum Combination of Carbon and Glass Fiber Composite to Obtain the Hybrid Effect , 2011 .

[35]  H. N. Narasimha Murthy,et al.  Seawater Durability of Epoxy/Vinyl Ester Reinforced with Glass/Carbon Composites , 2010 .

[36]  Zhishen Wu,et al.  Mechanical Properties of Steel-FRP Composite Bar under Uniaxial and Cyclic Tensile Loads , 2010 .

[37]  Ananth Ramaswamy,et al.  Strength and serviceability performance of beams reinforced with GFRP bars in flexure , 2007 .

[38]  Edoardo Cosenza,et al.  Durability issues of FRP rebars in reinforced concrete members , 2006 .

[39]  J. Thomas,et al.  Performance of hybrid rebars as longitudinal reinforcement in normal strength concrete , 2005 .

[40]  Jeffrey S. Russell,et al.  A model specification for FRP composites for civil engineering structures , 2003 .

[41]  C. Bakis,et al.  Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications , 2001 .

[42]  M. G. Bader,et al.  The strength of hybrid glass/carbon fibre composites , 1981 .

[43]  B. Proctor,et al.  The use of accelerated ageing procedures to predict the long term strength of GRC composites , 1981 .

[44]  A. Nanni,et al.  Tensile properties of hybrid rods for concrete reinforcement , 1994 .

[45]  Nripati Ranjan Bose,et al.  Temperature dependence of hydrothermal ageing of CSM-laminate during water immersion , 1987 .