论文信息 - A new four terminal-pair bridge for traceable impedance measurements at frequencies up to 1 MHz

A new four terminal-pair bridge for traceable impedance measurements at frequencies up to 1 MHz

A new four terminal-pair bridge has been developed and used for traceable measurement of capacitance and resistance at frequencies up to 1 MHz. The apparent capacitance of a gas-filled 100-pF standard agrees with calculated values to better than 200 /spl mu/F/F at 1 MHz. This is an order of magnitude improvement on existing capabilities at NPL. The frequency dependence of the dissipation factor of capacitance standards is discussed, and the capacitance and dissipation factor of ceramic NPO-dielectric standards has also been measured. The frequency dependence measurements of the calculable coaxial 100-/spl Omega/ and 1-k/spl Omega/ resistance standards are also presented.

[1] S. A. Awan,et al. Calibration of IVDs at frequencies up to 1 MHz by permuting capacitors , 2000 .

[2] T. Aoki,et al. A new universal calibration method for four-terminal-pair admittance standards , 1990 .

[3] Raymond Nelson Jones,et al. Evaluation of Three-Terminal and Four-Terminal Pair Capacitorsat High Frequencies | NIST , 1980 .

[4] S. Avramov-Zamurovic,et al. Uncertainty analysis for four terminal-pair capacitance and dissipation factor characterization at 1 MHz and 10 MHz , 1999, IMTC/99. Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (Cat. No.99CH36309).

[5] B P Kibble. Proposals for extending traceable impedance measurements to higher frequencies , 1998 .

[6] D.L.H. Gibbings,et al. A design for resistors of calculable a.c./d.c. resistance ratio , 1963 .